aus Metalab, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Wechseln zu: Navigation, Suche






parsing GCode c++ class

involute gears gcode generator




Bernhard Kubicek
Energy Department -Electric Energy Systems
Forschungs- und Prüfzentrum Arsenal Ges.m.b.H
Austrian Institute of Technology
Vortragender Technikum Wien - Erneuerbare Energien
Dissertant TU Wien, fast fertig, Switching Arc Simulations
Diplomarbeit TU Wien, Physik, Parallel Optimization of Nuclear Potentials


  • 3D numerical Simulation:
    • Fluid Dynamics
    • Heat Transport
    • Radiation Modelling
    • Plasma Simulations
    • Mutliphysics
  • Parallel Computing
  • Cluster Administration (70 Nodes)
  • C++, QT, number crunching
  • Atmega*
  • LED Lighting (Luxeon Rebel, Cree MC-E, ...)
  • DIY Chocolate Fabrication (e.g. Mozartkugeln)
  • 3-Axis CNC Lathe, EMC2



  • Bernhard Kubicek, Karl Berger: Modelling Moving Electric Arcs: Verification of a Coupled Fluid-Dynamics Magnetostatic Approach. Proc. COMPUMAG 2007 Aachen, 16th International Conference on the Computation of Electromagnetic Fields, (2007).
  • Karl A. Berger, Bernhard Kubicek: Comparison of Measured and Numerically Calculated Arc Movement on Curved Runners. Physics of Switching Arc Conference, 17th FSO, Nove Mesto na Morave, Proc. 17th FSO, Brno, (2007).


  • Hribernik W., Kubicek B., Pascoli G., Froehlich K.: Verification of a model-based diagnosis system for online detection of the moisture content of power transformers insulations using finite element calculations. International Conference on Condition Monitoring and Diagnosis, China, (2008).
  • B. Kubicek, K. A. Berger: Modeling Moving Electric Arcs: Verification of a Coupled Fluid-Dynamics Magnetostatic Approach. IEEE Trans. on Magnetics, Vol. 44/6, p.790-793, (2008).
  • K. A. Berger, B. Kubicek: Experimental investigation of low-voltage arcs' motion and splitting in simplified arc chutes. Proc. 24th International Conf. on Electric Contacts, ICEC 2008, Saint-Malo, June 9-12, p. 25-30. (2008)
  • B. Kubicek, K. A. Berger: A Finite Volume Scheme for Modeling Arc Discharges in Low Voltage Circuit Breaking Devices. 54th IEEE Holm Conf. on Electrical Contacts, Orlando, (2008).
  • T. Waltenberger, C. Henkel, H. Lang, B. Kubicek: Enhanced precision in heat treatment of aluminium sheets and plates by simulation supported process design. 11th International Conference on Aluminium Alloys, Aachen, Deutsche Gesellschaft fuer Materialkunde, (2008).


  • W. Hribernik, G. Brauner, C. Faltin, B. Kubicek, F. Musai, A simulation-based methodology for high-current heat-run testing of distribution system components, 20 International Conference on Electricity Distribution, CIRED, Prage June 2009.
  • B. Kubicek, W. Hribernik, G. Brauner, C. Faltin, F. Musai, B. Semlitsch and M. Popovac, CFD analysis of the turbulent flow field and thermalbehavior of high-current electric switchgear, 6th International Symposium on Turbulence, Heat and Mass Transfer, THMT Rome, 2009
  • C. Kral, A. Haumer, B. Kubicek, O. Winter, Model of a Squirrel Cage Induction Machine with Interbar Conductances, 7th International Modelica Conference, Como, Italy, 2009.
  • C. Kral, H. Kapeller, J. V. Gragger, A. Haumer, B. Kubicek, Phenomenon Rotor Fault- Multiple Electrical Rotor Asymmetries in Induction Machines, The 7th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drive, SDEMPED, Cargese, France, 2009.
  • B. Kubicek, K. A. Berger, Effects of many P1-spectral bands on switching arc simulations, XVIII Symposium on Physics of Switching Arc, Nove Mesto na Morave, Czech Republic, 2009.
  • B. Kubicek, B. Semlitsch, Raytracing for CFD, ERCOFTAC Alpe Danube Adria PC Meeting, 2009.