FunkFeuer-Node/Komponenten

aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Version vom 29. September 2024, 18:27 Uhr von Jackie (Diskussion | Beiträge) (→‎Hardware)
(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)
Zur Navigation springenZur Suche springen

Hardware

In Metalab

The two primary routers in Metalab are also doing the FunkFeuer routing (one running OLSRd for IPv4, the other one running OLSRd2 for IPv6).
The connection between lab and roof is via four single mode fibres and a 4-wire cable for 24V DC.

On the Roof

Hardware inside the box as of March 2024
Roof Hardware
Device "Hostname" Description
ER-X-SFP DACH1 Basically just used as a media converter with switchable PoE injector
ER-X-SFP DACH2 Basically just used as a media converter with switchable PoE injector
NBE-5AC-19 ? Link to la12, should be replaced by 60GHz
NBE-M5-16 ? Backup link to wrkch, pretty old hardware

The idea behind the current setup is to have no single point of failure on the roof as we can not access it immediately in case of any equipment malfunction.