MOS VM

MOS/VM

MOS VM
Gestartet:	21.01.2013
Involvierte:	queltos, Hetti
Status:	awesome
Beschreibung:	Build your own virtual machine for MOS development using Vagrant
Shutdownprozedur:
Zuletzt aktualisiert:	2022-12-11

Build your own virtual machine for MOS development using Vagrant.

Done with:

• Debian Bullseye (Debian 11)
• Oracle VM VirtualBox Manager 6 and further
• Vagrant 2.x.x

Checkout MOS from github

• https://github.com/Metalab/mos.git

$ https://github.com/Metalab/mos.git

cd into the project directory

$ cd mos

Call vagrant to build and setup your VM

$ vagrant up

You should see something like

Bringing machine 'default' up with 'virtualbox' provider...
==> default: Importing base box 'debian/bullseye64'...
==> default: Matching MAC address for NAT networking...
==> default: Checking if box 'debian/bullseye64' version '11.20220912.1' is up to date...
==> default: Setting the name of the VM: mos_metalab_default_1670797153813_2335
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
    default: Adapter 1: nat
==> default: Forwarding ports...
    default: 8000 (guest) => 8000 (host) (adapter 1)
    default: 22 (guest) => 2222 (host) (adapter 1)
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
    default: SSH address: 127.0.0.1:2222
    default: SSH username: vagrant
    default: SSH auth method: private key
    default: 
    default: Vagrant insecure key detected. Vagrant will automatically replace
    default: this with a newly generated keypair for better security.
    default: 
    default: Inserting generated public key within guest...
    default: Removing insecure key from the guest if it's present...
    default: Key inserted! Disconnecting and reconnecting using new SSH key...
==> default: Machine booted and ready!
==> default: Checking for guest additions in VM...
    default: The guest additions on this VM do not match the installed version of
    default: VirtualBox! In most cases this is fine, but in rare cases it can
    default: prevent things such as shared folders from working properly. If you see
    default: shared folder errors, please make sure the guest additions within the
    default: virtual machine match the version of VirtualBox you have installed on
    default: your host and reload your VM.
    default: 
    default: Guest Additions Version: 6.0.0 r127566
    default: VirtualBox Version: 7.0
==> default: Setting hostname...
==> default: Mounting shared folders...
    default: /vagrant => <YOUR LOCAL SHARED FOLDER PATH>
==> default: Running provisioner: shell...
    default: Running: /tmp/vagrant-shell20221211-25251-r8t8xa.sh

#####
<various packet update operations>
#####

    default: 
    default: PLAY [all] *********************************************************************
    default: 
    default: TASK [Gathering Facts] *********************************************************
    default: ok: [localhost]
    default: 
    default: TASK [link /mos -> /vagrant] ***************************************************
    default: changed: [localhost]
    default: 
    default: TASK [Install packages] ********************************************************
    default: changed: [localhost]
    default: 
    default: TASK [add locale de_DE.UTF-8] **************************************************
    default: changed: [localhost]
    default: 
    default: TASK [Upgrade pip3] ************************************************************
    default: changed: [localhost]
    default: 
    default: TASK [Install python modules] **************************************************
    default: changed: [localhost] => (item=/vagrant/requirements.txt)
    default: changed: [localhost] => (item=/vagrant/requirements-dev.txt)
    default: 
    default: TASK [check the existence of the secret_key.py file and create one if it does not exist] ***
    default: ok: [localhost]
    default: 
    default: TASK [generate random django secret] *******************************************
    default: skipping: [localhost]
    default: 
    default: TASK [generate mos sqlite database] ********************************************
    default: ok: [localhost]
    default: 
    default: TASK [django makemigrations] ***************************************************
    default: ok: [localhost]
    default: 
    default: TASK [django migrate] **********************************************************
    default: ok: [localhost]
    default: 
    default: TASK [Create Admin User] *******************************************************
    default: skipping: [localhost]
    default: 
    default: TASK [django loaddata] *********************************************************
    default: skipping: [localhost]
    default: 
    default: TASK [Activate virtualenv on vagrant ssh] **************************************
    default: changed: [localhost]
    default: 
    default: TASK [Change into mos dir on vagrant ssh] **************************************
    default: changed: [localhost]
    default: 
    default: PLAY RECAP *********************************************************************
    default: localhost                  : ok=12   changed=7    unreachable=0    failed=0    skipped=3    rescued=0    ignored=0

After booting up you will be greeted with our Info Screen iwith the next steps.

==> default: Machine 'default' has a post `vagrant up` message. This is a message
==> default: from the creator of the Vagrantfile, and not from Vagrant itself:
==> default: 
==> default: ======================================================
==> default: 
==> default: 
==> default: ███╗   ███╗███████╗████████╗ █████╗ ██╗      █████╗ ██████╗
==> default: ████╗ ████║██╔════╝╚══██╔══╝██╔══██╗██║     ██╔══██╗██╔══██╗
==> default: ██╔████╔██║█████╗     ██║   ███████║██║     ███████║██████╔╝
==> default: ██║╚██╔╝██║██╔══╝     ██║   ██╔══██║██║     ██╔══██║██╔══██╗
==> default: ██║ ╚═╝ ██║███████╗   ██║   ██║  ██║███████╗██║  ██║██████╔╝
==> default: ╚═╝     ╚═╝╚══════╝   ╚═╝   ╚═╝  ╚═╝╚══════╝╚═╝  ╚═╝╚════╝
==> default: 
==> default: Vagrant VM Development Machine
==> default: 
==> default: How to proceed further:
==> default: 
==> default: enter the VM with:
==> default: $ vagrant ssh
==> default: 
==> default: Execute the following commands inside the VM:
==> default: 
==> default: 1) You have to set the 'admin' superuser password manually
==> default: $ ./manage.py changepassword admin
==> default: 
==> default: 2) Start the server bound on all interfaces instead of 127.0.0.1 only
==> default: $ ./manage.py runserver 0.0.0.0:8000
==> default: 
==> default: Access the instance under http://localhost:8000 in your browser
==> default: 
==> default: Modifications in the folder will be immediately available in the dev environment.
==> default: 
==> default: 

Step 5: Login into your VM

$ vagrant ssh

You should see something like:

Linux mos-dev-vm 5.10.0-18-amd64 #1 SMP Debian 5.10.140-1 (2022-09-02) x86_64

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Dec 11 22:22:15 2022 from 10.0.2.2
(dev) vagrant@mos-dev-vm:/mos$ 

Step 6: Set initial admin PW for your MOS (do this IN the ssh session you opened before as explained in step 5)

user "admin" is already created by the vagrant script.

(dev) vagrant@mos-dev-vm:/mos$ ./manage.py changepassword admin

You will be asked twice for the new password

This user can be used to login into the MOS through the web frontend

Step 7: Run the MOS inside your VM

(dev) vagrant@mos-dev-vm:/mos$ ./manage.py runserver 0.0.0.0:8000

You should see something like:

Watching for file changes with StatReloader
Performing system checks...

System check identified no issues (0 silenced).
Dezember 11, 2022 - 23:22:39
Django version 3.2.16, using settings 'mos.settings.devel'
Starting development server at http://0.0.0.0:8000/
Quit the server with CONTROL-C.

Step 8: Open a browser on your host machine and connect to http://localhost:8000/

Step 9: Login into MOS with a click on "Login" and provide the credentials used in step 6

Step 10: Profit!

Hint: After login into your VM you will be in the directory from your host where you checked out the project. You can edit files on your host and the changes will be visible inside your VM.

If you are done with hacking stop the VM from your host with

$ vagrant halt

or suspend it

$ vagrant suspend

To start it again just enter:

$ vagrant up

You will see something like:

Bringing machine 'default' up with 'virtualbox' provider...
==> default: Checking if box 'debian/bullseye64' version '11.20220912.1' is up to date...
==> default: Clearing any previously set forwarded ports...
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
    default: Adapter 1: nat
==> default: Forwarding ports...
    default: 8000 (guest) => 8000 (host) (adapter 1)
    default: 22 (guest) => 2222 (host) (adapter 1)
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
    default: SSH address: 127.0.0.1:2222
    default: SSH username: vagrant
    default: SSH auth method: private key
==> default: Machine booted and ready!
==> default: Checking for guest additions in VM...
    default: The guest additions on this VM do not match the installed version of
    default: VirtualBox! In most cases this is fine, but in rare cases it can
    default: prevent things such as shared folders from working properly. If you see
    default: shared folder errors, please make sure the guest additions within the
    default: virtual machine match the version of VirtualBox you have installed on
    default: your host and reload your VM.
    default: 
    default: Guest Additions Version: 6.0.0 r127566
    default: VirtualBox Version: 7.0
==> default: Setting hostname...
==> default: Mounting shared folders...
    default: /vagrant => <YOUR LOCAL SHARED FOLDER PATH>
==> default: Machine already provisioned. Run `vagrant provision` or use the `--provision`
==> default: flag to force provisioning. Provisioners marked to run always will still run.

No worries, the last line is not an error :)

btw, don't forget to login into it and start MOS again