Dome

MIDDLE - LEFT - RIGHT (what a nice mantra)

the overview

Cut and drill.. 500 holes

Spraypaint

Some finished struts

Painting done

Construction

Done!

Cosy

Deconstruction (~10 minute with 5 guys)

You need:

250 bars (get 270+ to have some spareparts) the inner parts of slatted frames for beds work great
91 M6 screws (length: 80 mm)
91 Wing nuts
182 Washers (the bigger the better)
Spray paint (RED,GREEN,BLUE,ORANGE)

Cut them in 5 different lengths.

Drill a hole 2cm from the border in the middle of the struts ends.

Start with 5 pcs type A struts (orange) Connect them like this: WASHER, SCREW, 5 BARS (A),WASHER,WING NUT, dont over tighten yet

You successfully put together the middle structure that will be on the center top of the dome.

Now from the end of these connect 5 type B struts. The magic formular is:

MIDDLE - LEFT - RIGHT

and thats how you go on according to the diagram above.

This is true for the whole assembly.

Take a corner of a triangle, consider that "middle" and connect first left and then right to it.

There are 5 types of triangles:

Type	Count	MEASUREMENTS (center connectior -> center connector)	MEASUREMENNTS FOR CUTOUT
AAB	35	60x60x70	52x52x62
BBB	35	70x70x70	62x62x62
BDF	65	70 x 74.2 x 70.8	61 x 66 x 63
DDE	25	74.2 x 74.2 x 77	66 x 66 x 69
EEE	5	77 x 77 x 77	69 x 69 x 69

measure the sizes of the different triangles / create different inlays with mirors and out of acrylic
~~measure the top / center pentagon for replacement with solid wood~~ done
~~add sprinklers for water~~ done
~~add ventilator~~ done
~~deign ledmounts~~ done
add 100 leds
make ledmounts