Geil-o-mat/PC: Unterschied zwischen den Versionen
Reox (Diskussion | Beiträge) some further information about Bios |
Reox (Diskussion | Beiträge) more notes |
||
| Zeile 8: | Zeile 8: | ||
Parallel Port IRQ: IRQ5 | Parallel Port IRQ: IRQ5 | ||
at least this works for this specific mainboard. '''ECP+EPP''' is probably the most important thing! The Port address is also important but can be changed in the .hal files. | at least this works for this specific mainboard. '''ECP+EPP''' is probably the most important thing! The Port address is also important but can be changed in the .hal files. | ||
* It is also a good idea to disable all hardware in the BIOS that is not needed. e.g. audio, firewire, ... | |||
* Download ISO from LinuxCNC Homepage, <tt>dd if=linuxcnc.iso of=/dev/stick</tt> on usb stick and install: [http://linuxcnc.org/docs/html/getting-started/getting-linuxcnc.html Download Page] | * Download ISO from LinuxCNC Homepage, <tt>dd if=linuxcnc.iso of=/dev/stick</tt> on usb stick and install: [http://linuxcnc.org/docs/html/getting-started/getting-linuxcnc.html Download Page] | ||
* After installation put network to static, use <tt>10.20.30.60/16</tt> as IP Address, look up current gateway and DNS server | * After installation put network to static, use <tt>10.20.30.60/16</tt> as IP Address, look up current gateway and DNS server | ||