MHS: Unterschied zwischen den Versionen

  * An Air gap of 8mm or more will be required between the LCD panel and the touch sensor.

  * In all cases the earth cable provided with the touchfoil™ controller MUST be connected to the metal CASE/CHASSIS of the LCD. The whole setup should be very well grounded.

  * Isolate the USB/Serial cable away from other cables eg. VGA, power or data cables.

  * Try to locate the controller board away from power supplies, printers, inverters or any other electronic components in your in your unit.

  * Standard configuration functions with non-metallic, non-conductive single construction glass which caters for up to 20mm inclusive of glass and air gap.

  * please note that 1mm of air is equal to 3mm of glass

  * It is important to allow for circulation of air in front of the LCD.