MHS: Unterschied zwischen den Versionen
aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Zur Navigation springenZur Suche springenM68k (Diskussion | Beiträge) (initial page) |
Anlumo (Diskussion | Beiträge) (Informationen++) |
||
| Zeile 6: | Zeile 6: | ||
}} | }} | ||
TODO | TODO | ||
| + | |||
| + | = Monitor = | ||
| + | |||
| + | [http://www.necdisplay.com/p/large--screen-displays/lcd4215-r?type=support Bildschirmseite vom Hersteller] | ||
| + | |||
| + | äußere Schrauben sind M4, die vom VESA-Pattern sind M6 | ||
| + | |||
| + | = Touchscreen = | ||
| + | |||
| + | Touchglasplatte: 102.2x65.2x0.37cm | ||
| + | |||
| + | [http://www.visualplanet.biz/get-interactive/driver-download.php Treiber] | ||
| + | |||
| + | Mounting information: | ||
| + | |||
| + | * An Air gap of 8mm or more will be required between the LCD panel and the touch sensor. | ||
| + | * In all cases the earth cable provided with the touchfoil™ controller MUST be connected to the metal CASE/CHASSIS of the LCD. The whole setup should be very well grounded. | ||
| + | * Isolate the USB/Serial cable away from other cables eg. VGA, power or data cables. | ||
| + | * Try to locate the controller board away from power supplies, printers, inverters or any other electronic components in your in your unit. | ||
| + | * Standard configuration functions with non-metallic, non-conductive single construction glass which caters for up to 20mm inclusive of glass and air gap. | ||
| + | * please note that 1mm of air is equal to 3mm of glass | ||
| + | * It is important to allow for circulation of air in front of the LCD. | ||
| + | |||
| + | Original-Abstandshalter war ~11x11mm (vermutlich Acryl) | ||
Version vom 3. Mai 2014, 21:35 Uhr
| MHS | |
| |
| Gestartet: | |
| Involvierte: | Various Artists |
| Status: | in progress |
| Beschreibung: | Documentation of our Moderately Huge Screens |
| Shutdownprozedur: | |
| Zuletzt aktualisiert: | 2014-05-03 |
TODO
Monitor
Bildschirmseite vom Hersteller
äußere Schrauben sind M4, die vom VESA-Pattern sind M6
Touchscreen
Touchglasplatte: 102.2x65.2x0.37cm
Mounting information:
* An Air gap of 8mm or more will be required between the LCD panel and the touch sensor. * In all cases the earth cable provided with the touchfoil™ controller MUST be connected to the metal CASE/CHASSIS of the LCD. The whole setup should be very well grounded. * Isolate the USB/Serial cable away from other cables eg. VGA, power or data cables. * Try to locate the controller board away from power supplies, printers, inverters or any other electronic components in your in your unit. * Standard configuration functions with non-metallic, non-conductive single construction glass which caters for up to 20mm inclusive of glass and air gap. * please note that 1mm of air is equal to 3mm of glass * It is important to allow for circulation of air in front of the LCD.
Original-Abstandshalter war ~11x11mm (vermutlich Acryl)
