Zum Inhalt springen

Moderator: Unterschied zwischen den Versionen

Overflo (Diskussion | Beiträge)
Keine Bearbeitungszusammenfassung
Anlumo (Diskussion | Beiträge)
Zeile 5: Zeile 5:


==Hardware==
==Hardware==
bare PCB, no container (yet)


===MCU===
===MCU===
[http://www.st.com/web/catalog/mmc/FM141/SC1169/SS1031/LN775/PF216839 STM32F100C8T6]
Reasons:
* Cheap
* Powerful (up to 24MHz), Cortex-M3
* Lots of GPIOs
* Small (LQFP48)
* 3.3V levels
Alternatives:
* STM32F0xx
* Freescale Cortex-M0
* MSP430G2553
* [https://www.semiconductorstore.com/cart/pc/viewPrd.asp?idproduct=48872 RFD22301] (probably far too expensive, but it includes the RF stuff)
* ATmega328P @ 3.3V, 8MHz


===RF===
===RF===
nRF24L01+ module
Reasons:
* Cheap
* Small
* Relatively low-power
* Easy to use
* Lot of libraries for it
* Supports point-to-point, broadcasts and multiple channels
* Special module versions available with ranges of up to 1100m
* Uses 3.3V levels
There are a lot of modules with that chip available. Most of them use a 2x4pin 0.1" connector with a standard pinout. There are also much smaller SMD modules available, but these are more expensive and do not seem to have a standard pinout or layout.
Alternatives:
* Bluetooth 4.0 Low Energy (nRF8001, BLE113-A, CC2541, …)
* 433MHz RF wireless transmitter module (one-way only!)
* 802.11b/g/n (CC3000, HF-LPB, …)


===Display?===
===Display?===
Nokia 5110 display
Reasons:
* Cheap
* Small
* Low-power
* Lot of libraries for it
* Can mount directly to the PCB, no expensive/rare connector required
* Uses 3.3V levels
Alternatives:
* Just some status LEDs (takes a lot of power)
* [http://www.sharpmemorylcd.com/1-28-inch-memory-lcd.html Sharp Memory Display]
* Liquid Crystal display without a backlight
* Two flipdot-dots?


===Buttons===
===Buttons===
5x5mm button
Reasons:
* Cheap
* Large enough for humans to handle
Alternatives:
too many to list


===Leds===
===Leds===


None


Reasons:


* LEDs require a lot of power
* Not a lot of expressiveness with them


==BOM==
==BOM==