WS2801 Raspberry Pi Bridge: Unterschied zwischen den Versionen
| Zeile 1: | Zeile 1: | ||
==What== | ==What== | ||
| − | The WS2801 Bridge | + | The WS2801 Bridge for Raspberry Pi is a project developed by [[User:wizard23|wizard23]] and produced by [[User:Overflo|overflo]]. |
The metalab received a Rasperry Pi care package from [http://adafruit.com adafruit] and because we really dig blinky things we made a WS2801 controller for the Raspberry Pi. | The metalab received a Rasperry Pi care package from [http://adafruit.com adafruit] and because we really dig blinky things we made a WS2801 controller for the Raspberry Pi. | ||
Version vom 22. März 2013, 08:57 Uhr
What
The WS2801 Bridge for Raspberry Pi is a project developed by wizard23 and produced by overflo.
The metalab received a Rasperry Pi care package from adafruit and because we really dig blinky things we made a WS2801 controller for the Raspberry Pi.
Its a simple shield that you can attach to your Raspberry Pi that functions as a bridge from Raspberry Pi to control a wide variety of WS2801 based Ledstripes and Pixelmodules at different voltage levels.
You can make your things go blinky from python or C/C++ without the need of a separate microcontroller.
It uses the internal /dev/spi0.0 provided by the Linux Kernel to talk to the Bridgemodule.
And because this is awesome, we made a kit out of it that you can purchase for 10,- on the hackerspaceshop.com
Links
Kit on the hackerspaceshop.com
