Blinkofant: Unterschied zwischen den Versionen
aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Zur Navigation springenZur Suche springen (→WTF) |
|||
| Zeile 16: | Zeile 16: | ||
* POUT EQU CENTRO ;the leftmost module will be connected to the POUT-port | * POUT EQU CENTRO ;the leftmost module will be connected to the POUT-port | ||
* ATTENTION! The bit positions must not be changed! | * ATTENTION! The bit positions must not be changed! | ||
| − | |||
| − | |||
* 8V, 5V, 12V, GND sind auf unseren boards NICHT bestückt mit pins. | * 8V, 5V, 12V, GND sind auf unseren boards NICHT bestückt mit pins. | ||
| Zeile 36: | Zeile 34: | ||
| 4 | | 4 | ||
| ClkRing EQU 1 ;clock for shift left the whole line | | ClkRing EQU 1 ;clock for shift left the whole line | ||
| + | | CLOCK | ||
|- | |- | ||
| 5 | | 5 | ||
| ClkLoad EQU 2 ;clock for shift left & loading all selected modules | | ClkLoad EQU 2 ;clock for shift left & loading all selected modules | ||
| + | | | ||
|- | |- | ||
| 6 | | 6 | ||
| ClkBlink EQU 3 ;clock for blinking (0...off, 1...on) | | ClkBlink EQU 3 ;clock for blinking (0...off, 1...on) | ||
| + | | selektrierte spalte blinken | ||
|- | |- | ||
| 7 | | 7 | ||
| ClkSteu EQU 4 ;clock for shift left & load control data from DatLoad | | ClkSteu EQU 4 ;clock for shift left & load control data from DatLoad | ||
| + | | DATA! | ||
|- | |- | ||
| 8 | | 8 | ||
| DatRing EQU 5 ;data bit for loading data during ClkRing | | DatRing EQU 5 ;data bit for loading data during ClkRing | ||
| + | | wurscht | ||
|- | |- | ||
| 9 | | 9 | ||
| Reset EQU 6 ;clear all control data | | Reset EQU 6 ;clear all control data | ||
| + | | wurscht | ||
|- | |- | ||
| 10 | | 10 | ||
Version vom 25. März 2012, 16:51 Uhr
WTF
Recently we got this HUGE led walls.
we disassmbled the monster and now we got ~300 led modules
each 8*9 pixels each pixel consisting of 5 leds = 360 red leds / panel times ~300 panels equals 90.000 leds++ :) we dont know how tp power them yet :)
Doku der pins
- POUT EQU CENTRO ;the leftmost module will be connected to the POUT-port
- ATTENTION! The bit positions must not be changed!
- 8V, 5V, 12V, GND sind auf unseren boards NICHT bestückt mit pins.
| pin number | function | |
| 1 | data/clock ? comes back out here (rückleitung schebereigster) | |
| 2 | data/clock ? comes back out here (rückleitung schebereigster) | |
| 3 | DatLoad EQU 0 ;data bit for loading data and control data | |
| 4 | ClkRing EQU 1 ;clock for shift left the whole line | CLOCK |
| 5 | ClkLoad EQU 2 ;clock for shift left & loading all selected modules | |
| 6 | ClkBlink EQU 3 ;clock for blinking (0...off, 1...on) | selektrierte spalte blinken |
| 7 | ClkSteu EQU 4 ;clock for shift left & load control data from DatLoad | DATA! |
| 8 | DatRing EQU 5 ;data bit for loading data during ClkRing | wurscht |
| 9 | Reset EQU 6 ;clear all control data | wurscht |
| 10 | OnOff EQU 7 ;turn on/off the whole display (0...off, 1...on) | turns off ALL the leds when pulled to ground |
