Archiv:OldLaser (2021): Unterschied zwischen den Versionen
| Zeile 95: | Zeile 95: | ||
==Cheats== | ==Cheats== | ||
* Focus: | * Focus: | ||
** Press Stop and then Focus on the machine: Focus on the homeposition, rather then 50 mm diagonally shifted from home.. | ** Press Stop and then Focus on the machine: '''Focus on the homeposition''', rather then 50 mm diagonally shifted from home.. | ||
** XY-Off, Go: Free moving mode. OK thats not a cheat. NOW: keyboard cursor up/down moves the table up down. Cool! Also works after pressing "focus", without "go" afterwards.. | ** XY-Off, Go: Free moving mode. OK thats not a cheat. NOW: keyboard '''cursor up/down moves the table up down'''. Cool! Also works after pressing "focus", without "go" afterwards.. | ||
** Autofocus happens at the first cut/engrave position of the file. | ** Autofocus happens at the first cut/engrave position of the file. | ||
* Engrave: | * Engrave: | ||
** "bottom up" is sometimes better, depends on the direction of the fumes. Fumes should move away from the deep parts. | ** "bottom up" is sometimes better, depends on the direction of the fumes. Fumes should move away from the deep parts. | ||
** Stucki Rastering is nice.. Brighten=different gamma | ** Stucki Rastering is nice.. Brighten=different gamma | ||
** panel 3d mode: Not the position of the laser pulses is rastered, but instead the laser-power changes by the gray level. So the laser seems to be constantly on.. | ** panel 3d mode: Not the position of the laser pulses is rastered, but instead the laser-power changes by the gray level. So the laser seems to be constantly on. Needs more Laserpower than in the tables (+30%?). | ||
** Engrave speed and Power can be changed while the job is lazzoring. Not possible for vector! Press spee/powerd, and cursor up or down, go to apply | ** Engrave speed and Power can be changed while the job is lazzoring. Not possible for vector! Press spee/powerd, and cursor up or down, go to apply | ||
** Plastic: Engrave whith cover foil removed. | ** Plastic: Engrave whith cover foil removed. | ||
** Plastic: engrave 1.5 | ** Plastic: engrave 1.5 mm out of focus=smoother surfaces. | ||
** Plastic: second pass with low power settings: removes dirt from the depths. | ** Plastic: second pass with low power settings: removes dirt from the depths. | ||
** Plastic: can be wetted for less melting.. | ** Plastic: can be wetted for less melting.. | ||