Umbrella: Unterschied zwischen den Versionen
(fixed typos) |
(added troubleshoot for lightswitch) |
||
| Zeile 11: | Zeile 11: | ||
[[Datei:Umbrella_lightswitch_2.jpg|200px]] | [[Datei:Umbrella_lightswitch_2.jpg|200px]] | ||
| + | If it does not work try unplugging and replugging it. Wait a couple of seconds. | ||
==Why== | ==Why== | ||
| Zeile 65: | Zeile 66: | ||
* Select Tools: | * Select Tools: | ||
** GENERIC ESP8266 Module | ** GENERIC ESP8266 Module | ||
| − | ** Flash Mode DIO | + | ** Flash Mode: DIO |
| − | ** Flash Size 1M (512K SPIFFS) | + | ** Flash Size: 1M (512K SPIFFS) |
** Debug Port: Disabled | ** Debug Port: Disabled | ||
** Debug Level: none | ** Debug Level: none | ||
| Zeile 72: | Zeile 73: | ||
** Flash Frequency: 40 Mhz | ** Flash Frequency: 40 Mhz | ||
** CPU Frequency: 80 Mhz | ** CPU Frequency: 80 Mhz | ||
| − | ** Upload Speed 115200 or more | + | ** Upload Speed: 115200 or more |
Version vom 20. Mai 2017, 19:32 Uhr
How to simply turn on the Light
Use the light switch next to the kitchen. You can dim the light with the rotary knob on the side.
If it does not work try unplugging and replugging it. Wait a couple of seconds.
Why
The metalab needs some new lights.
ART-net is awesome.
How
Raspberry Pi 3 + Touchscreen
Distro based on the QLC+ image (raspbian jessie)
QLC+ X-server less build that renders directly in GL buffers for performance
H801 based clients (ESP8266)
Arduino based firmware that implements ART-net
Temporary setup with QLC+
Connect to "metalights" WLAN
Set OUTPUT to 10.20.255.255
Set ARTnet universe to 3
There are 5 channels / Umbrella
R,G,B,WW,CW
If CW or WW are anything else but "0" R,G and B are disabled by firmware
If R,G or B are anything but "0" CW and WW are disabled by firmware
This is to save our power supplies from sudden heat death.
(105 watt / Umbrella max)
Hardware
H801 Led controller features:
- 8 Mbit Storage (1 Mb)
- 5 channels each 45 watt max (~ 3.5 Ampere @ 12 V / channel)
How to flash
- Install Arduino 1.6.4
- Install ESP 8266 extensions
- Select Tools:
- GENERIC ESP8266 Module
- Flash Mode: DIO
- Flash Size: 1M (512K SPIFFS)
- Debug Port: Disabled
- Debug Level: none
- Reset Mode: ck
- Flash Frequency: 40 Mhz
- CPU Frequency: 80 Mhz
- Upload Speed: 115200 or more
- Set JUMPER on board to boot into flash mode
- Power the board
Who
Originally invented and built by overflo, the umbrellas were built by a lot of people at some nightshifts at metalab
LOTS OF SUPPORT BY uniq, anlumo, ripper, bogdan <your name here>
