Archiv:Navi: Unterschied zwischen den Versionen

@@ Zeile 107: / Zeile 107: @@
 		pinctrl-names = "default";
 	};
+        pwm_bl: backlight {
+                compatible = "pwm-backlight";
+                pwms = <&pwm0 0 50000>; /* FIXME settings; FIXME use pwm0_pins_a. */
+                brightness-levels = <0 2 5 7 10 12 15 17 255>; /* FIXME more */
+                default-brightness-level = <0>;
+                enable-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio 122 */ /* FIXME: LCD power: PH8. */
+        };
+        panel: panel {
+                compatible = "innolux,at070tn92", "panel-dpi";
+                backlight = <&pwm_bl>;
+                /* TODO power-supply = <&vdd_pnl_reg> */
+                /* TODO port@0 { ... ...endpoint { tcon0_out_panel } } */
+        };
 };
@@ Zeile 136: / Zeile 152: @@
 &codec {
 	status = “okay”;
+};
+/* touchscreen */
+&rtp {
+        allwinner,ts-attached;
+        #thermal-sensor-cells = <0>;
+        /* sensitive/noisy touch panel */
+        allwinner,tp-sensitive-adjust = <0>;
+        allwinner,filter-type = <3>;
+};
+&pwm {
+        pinctrl-names = "default";
+        pinctrl-0 = <&pwm0_pins_a>;
+        status = "okay";
 };
 </pre>