MHS: Unterschied zwischen den Versionen
aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Zur Navigation springenZur Suche springenAnlumo (Diskussion | Beiträge) (schpellink) |
Anlumo (Diskussion | Beiträge) (logo) |
||
| Zeile 1: | Zeile 1: | ||
{{Projekt | {{Projekt | ||
| − | |image= | + | |image=MHS.png |
|involved=Various Artists | |involved=Various Artists | ||
|status=in progress | |status=in progress | ||
Version vom 9. Mai 2014, 18:12 Uhr
| MHS | |
| |
| Gestartet: | |
| Involvierte: | Various Artists |
| Status: | in progress |
| Beschreibung: | Documentation of our Moderately Huge Screens |
| Shutdownprozedur: | |
| Zuletzt aktualisiert: | 2014-05-09 |
TODO
Monitor
Bildschirmseite vom Hersteller
äußere Schrauben sind M4, die vom VESA-Pattern sind M6
Serielle Schnittstelle kann als Fernsteuerung verwendet werden. Proof of concept in der Slackomatic funktioniert bereits (Power on/off). PDF Doku vom Hersteller
Touchscreen
Touchglasplatte: 102.2x65.2x0.37cm
Mounting information:
- An Air gap of 8mm or more will be required between the LCD panel and the touch sensor.
- In all cases the earth cable provided with the touchfoil™ controller MUST be connected to the metal CASE/CHASSIS of the LCD. The whole setup should be very well grounded.
- Isolate the USB/Serial cable away from other cables eg. VGA, power or data cables.
- Try to locate the controller board away from power supplies, printers, inverters or any other electronic components in your unit.
- Standard configuration functions with non-metallic, non-conductive single construction glass which caters for up to 20mm inclusive of glass and air gap.
- please note that 1mm of air is equal to 3mm of glass
- It is important to allow for circulation of air in front of the LCD.
Original-Abstandshalter war ~11x11mm (vermutlich Acryl)
