MHS

MHS
Gestartet:
Involvierte:	Various Artists
Status:	in progress
Beschreibung:	Documentation of our Moderately Huge Screens
Shutdownprozedur:
Zuletzt aktualisiert:	2014-05-03

TODO

Monitor

Bildschirmseite vom Hersteller

äußere Schrauben sind M4, die vom VESA-Pattern sind M6

Touchscreen

Touchglasplatte: 102.2x65.2x0.37cm

Treiber

Mounting information:

• An Air gap of 8mm or more will be required between the LCD panel and the touch sensor.
• In all cases the earth cable provided with the touchfoil™ controller MUST be connected to the metal CASE/CHASSIS of the LCD. The whole setup should be very well grounded.
• Isolate the USB/Serial cable away from other cables eg. VGA, power or data cables.
• Try to locate the controller board away from power supplies, printers, inverters or any other electronic components in your in your unit.
• Standard configuration functions with non-metallic, non-conductive single construction glass which caters for up to 20mm inclusive of glass and air gap.
• please note that 1mm of air is equal to 3mm of glass
• It is important to allow for circulation of air in front of the LCD.

Original-Abstandshalter war ~11x11mm (vermutlich Acryl)