PCB CNC: Unterschied zwischen den Versionen
Keine Bearbeitungszusammenfassung |
|||
| Zeile 127: | Zeile 127: | ||
While the eagle autorouter tries to bundle wires closely together, for voronoi shaped pcbs, this is not so optimal. | While the eagle autorouter tries to bundle wires closely together, for voronoi shaped pcbs, this is not so optimal. | ||
You can still use the autorouter, however I would recommend it only on the bottom layer. I use a 12.5 mil routing grid usually, and * for bottom N/A for top. | You can still use the autorouter, however I would recommend it only on the bottom layer. I use a 12.5 mil routing grid usually, and * for bottom N/A for top. | ||
Then I move the wires around, so that the sidewards distance is maximized. | Then I move the wires around, so that the sidewards distance is maximized. This is done my making complete diagonals, and successively moving outer wires further outside. | ||
[[Datei:brdgoodpad.png|800 px|Example of good (not really, but sufficient) and bad wire placement". It is not a very good example, I will try to produce if there is time]] | |||
[[Datei:brdgoodpad.png|800 px|Example of good (not really, but sufficient) and bad wire placement"]] | |||
==Links== | ==Links== | ||