Prusa i3 Mk2.5S: Unterschied zwischen den Versionen

(26 dazwischenliegende Versionen von 11 Benutzern werden nicht angezeigt)

Zeile 1:

~~[[Datei:~~Prusai3mk2.jpeg|~~200px~~|~~thumb~~|~~right~~|Prusa i3 Mk2]]

{{Machine

|image=Prusai3mk2.jpeg

|owner=Metalab

|status=Aktiv

|requirestraining=nicht wirklich

|requiresauth=nein

|cost=gratis, aber eine Spende für Filament wäre nett :)

|teachers=[[User:ripper|ripper]], [[User:BadPractice|BadPractice]], [[User:nomike|nomike]], [[You?]]

}}

<br />

==New printer in the house: Prusa i3 Mk2.5S (no MMU2 anymore)==

The '''Prusa''' was owned by [[User:BadPractice|BadPractice]] and now belongs to Metalab since the MMU2 was installed (see [[2018-04-11_Jour_Fixe]]). It is available for everyone to use. The MMU was dismounted, because it had complications.

If you have no experience with 3D printing please ask for help and/or read instructions online.

~~=='''New Pinter in the house: Prusa i3 Mk2'''==~~

~~The Prusa belongs to BadPractice and is available for everyone to use. If you have no experience with 3DPrinting please ask for help and/or read instructions online.~~

==Howto==

Official ~~YouTube tutorial of the manufacturer is available here~~ [https://www.youtube.com/watch?v=JqH41K2vq0g ~~here~~]

* Official [https://www.youtube.com/watch?v=JqH41K2vq0g YouTube '''tutorial'''] by the manufacturer

* Official [http://prusa3d.com/downloads/manual/prusa3d_manual_mk2_en.pdf?5 '''manual'''] by the manufacturer

* Flash new Firmware [https://metalab.at/wiki/3DPrinter/Manual#Flash_new_Firmware]

* Spare Parts: [https://e3d-online.com/prusa-mk2-mk2s-hotend-spares '''UK Shop!''']]

~~Official Manual of the manufacturer is available [http://prusa3d.com/downloads/manual/prusa3d_manual_mk2_en.pdf?5 here]~~

==Using it==

==Do I need to visit a workshop to use it==

=== (PETG) Warnung/Warning ===

No. If you ~~are confident that you can operate the device you are allowed~~ to use it. ~~Otherwise please ask~~ for ~~help~~ and~~/or read instructions online.~~

{|

|bgcolor="#ffa500"|<div style="border:2px dotted #ff4500;color:black;line-height:2.1em;padding:0.8em;">

'''

DE:

Wenn ihr mit PETG Filament drucken wollt nutzt die [https://www.prusa3d.com/de/produkt/federstahldruckplatte-mit-doppelseitiger-pei-pulverbeschichtung-und-struktureffekt/ raue Druckplatte] !

<b>Nutze NICHT (außer du WEIẞT was du tust) die [https://www.prusa3d.com/de/produkt/federstahldruckplatte-mit-glatter-doppelseitiger-pei-schicht/ glatte Druckplatte] für PETG! Ansonsten wirst du die glatte Platte wahrscheinlich kaputt machen, weil sich die gedruckten Dinge nicht mehr lösen lassen!</b>

EN:

If you want to print with PETG Filament use the [https://www.prusa3d.com/product/double-sided-textured-pei-powder-coated-spring-steel-sheet/ textured print sheet] !

<b>Do NOT (except you KNOW what you do) use the [https://www.prusa3d.com/product/spring-steel-sheet-with-smooth-double-sided-pei/ smooth print sheet] for PETG! You will destroy the smooth print sheet with a high chance, because it's hard to remove the printed thing from the print sheet!</b>

'''</div>

|}

===Do I need to visit a workshop to use it===

No, but you need to reduce the fan speed to 40% on this 3D printer.

If you do not know how to change this, ask for help or use the [[Prusa_Mini]] which works with standard profile settings.

=== Material costs ===

Printing at Metalab is free in general, however it would be appreciated to leave a donation if you print something that needs a lot of material.

=== technical details ===

{| class="wikitable"

|-

! What !! Facts !! Comments

|-

| Build volume || 250×210×200mm || -

|-

| Layer height || 0,05 - 0,3mm || -

|-

| Fan (speed) || - || We have updated our fan, therefore you should use 40% for your min and max fan speed settings

|-

| Filamentsensor || {{Yes}} || -

|-

| Filament diameter || 1,75mm || -

|-

| Connectivity || USB, Ethernet || -

|-

| Print sheets || magnetic, smooth and textured || smooth for PLA, textured is required for materials like PET-G because it can destroy smooth sheets

|-

| Nozzle diameter || 0,4mm ||

|}

==What can i do to help==

* Set up [https://octoprint.org/ Octoprint] for the Printer

* Upgrade it to Mk2S (ask ripper for upgrade kit)

* general care for the printer (e.g. cleaning, lubrication of axes and leadscrews)

* <strike>Set up [https://octoprint.org/ Octoprint] for the Printer</strike>

* <s>Upgrade it to Mk2S (ask ripper for upgrade kit)</s>

==Octoprint upgrade==

login at [http://10.20.30.91 octoprint] (Find username/pwd on the printer)

[[Datei:Octoprint.png|600px]]

proudly presented by: [[user:ripper]], badpractice, [[user:m68k]]

==Multi color upgrade==

At [[2018-04-11_Jour_Fixe]] the decision was made to install the [https://shop.prusa3d.com/en/printer-upgrades/118-original-prusa-i3-mk2s-multi-material-upgrade-kit.html multi material upgrade] which costs 329€. Donations for participating are welcome, just add yourself to the list below and make the payment in the safe in main room.

At [[2018-04-11_Jour_Fixe]] the decision was made to install the [https://shop.prusa3d.com/en/printer-upgrades/118-original-prusa-i3-mk2s-multi-material-upgrade-kit.html multi material upgrade] which costs 329€.<br />Donations for participating are welcome, just add yourself to the list below and make the payment in the safe in main room.

{| class="wikitable"

!width="350"| Name !!width="150"| Amount !!width="50"| payed?

Zeile 31:

Zeile 105:

|-

| Raphael ||align="right"| 10 € ||align="center"| {{Yes}}

|-

~~| [[User:you|you?]] ||align="right"| ... € ||align="center"| {{No}}~~

|-

| bgcolor="lightgrey"| total ||bgcolor="lightgrey" align="right"| 90€ ||bgcolor="lightgrey" align="center"| 90€

|}

[[Kategorie:Maschinen]]