Blinkybutton: Unterschied zwischen den Versionen
aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Zur Navigation springenZur Suche springen (Die Seite wurde neu angelegt: „ == What == ESP-12F Module on custom board inside a snuggly fitting enclosure. Features: * ESP-12F * 3mm RED statusled * 5-12V inout voltage tolerant * 3.3V s…“) |
|||
| (4 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt) | |||
| Zeile 1: | Zeile 1: | ||
| + | == What == | ||
| + | |||
| + | <font color=red>'''EXPERIMENTAL PROTOTYPE, NOT A FINAL PRODUCT/DESIGN YET'''</font> | ||
| − | |||
ESP-12F Module on custom board inside a snuggly fitting enclosure. | ESP-12F Module on custom board inside a snuggly fitting enclosure. | ||
| − | + | Hardware features: | |
* ESP-12F | * ESP-12F | ||
* 3mm RED statusled | * 3mm RED statusled | ||
* 5-12V inout voltage tolerant | * 5-12V inout voltage tolerant | ||
| − | * 3.3V supply | + | * 3.3V supply voltage internally |
* 5V signal conversion fit FETs for 2 GPIO channels (CLK,DAT) | * 5V signal conversion fit FETs for 2 GPIO channels (CLK,DAT) | ||
| − | + | * Enclosure 36mm x 36mm x 15mm | |
| + | * '''NO''' button ;) | ||
| + | |||
| + | Software features: | ||
| + | * Fully web configureable | ||
| + | * Opens Accesspoint with a Captive Portal (zero configuration) | ||
| + | * Once configured it automatically connects to your WLAN and displays fancy rainbow patterns until it receives ART-net data | ||
| + | * Displays ART-net pixel data in realtime | ||
| + | * Compatible with QLC+, Madrix, Glediator and other Software that outputs ART-net data. | ||
== Who == | == Who == | ||
| Zeile 20: | Zeile 30: | ||
== Photos == | == Photos == | ||
| − | + | {| border=0 cellspacing="0" style="border-collapse:collapse;" | |
| + | |- | ||
| + | |style="vertical-align:top"|[[Bild:bb_coin.jpg|thumb|300px|Hidden Banana for reference]] | ||
| + | |style="vertical-align:top"|[[Bild:bb_red.jpg|thumb|300px|Bling!]] | ||
| + | |style="vertical-align:top"|[[Bild:bb_aus.jpg|thumb|300px|Aus]] | ||
| + | |} | ||
== References / Links == | == References / Links == | ||
* Blinkybutton (hackerspaceshop) | * Blinkybutton (hackerspaceshop) | ||
| + | * Used with [[Blinkentunnel_2.0]] | ||
TBD | TBD | ||
Aktuelle Version vom 25. November 2016, 17:57 Uhr
What
EXPERIMENTAL PROTOTYPE, NOT A FINAL PRODUCT/DESIGN YET
ESP-12F Module on custom board inside a snuggly fitting enclosure.
Hardware features:
- ESP-12F
- 3mm RED statusled
- 5-12V inout voltage tolerant
- 3.3V supply voltage internally
- 5V signal conversion fit FETs for 2 GPIO channels (CLK,DAT)
- Enclosure 36mm x 36mm x 15mm
- NO button ;)
Software features:
- Fully web configureable
- Opens Accesspoint with a Captive Portal (zero configuration)
- Once configured it automatically connects to your WLAN and displays fancy rainbow patterns until it receives ART-net data
- Displays ART-net pixel data in realtime
- Compatible with QLC+, Madrix, Glediator and other Software that outputs ART-net data.
Who
- Overflo - idea, electronics, firmware
Source
Photos
References / Links
- Blinkybutton (hackerspaceshop)
- Used with Blinkentunnel_2.0
TBD
