Blinkybutton: Unterschied zwischen den Versionen
Keine Bearbeitungszusammenfassung |
|||
| (2 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt) | |||
| Zeile 1: | Zeile 1: | ||
== What == | == What == | ||
<font color=red>'''EXPERIMENTAL PROTOTYPE, NOT A FINAL PRODUCT/DESIGN YET'''</font> | |||
ESP-12F Module on custom board inside a snuggly fitting enclosure. | ESP-12F Module on custom board inside a snuggly fitting enclosure. | ||
| Zeile 8: | Zeile 11: | ||
* 3.3V supply voltage internally | * 3.3V supply voltage internally | ||
* 5V signal conversion fit FETs for 2 GPIO channels (CLK,DAT) | * 5V signal conversion fit FETs for 2 GPIO channels (CLK,DAT) | ||
* Enclosure 36mm x 36mm x 15mm | |||
* '''NO''' button ;) | |||
Software features: | Software features: | ||
* Fully web configureable | * Fully web configureable | ||
| Zeile 14: | Zeile 19: | ||
* Once configured it automatically connects to your WLAN and displays fancy rainbow patterns until it receives ART-net data | * Once configured it automatically connects to your WLAN and displays fancy rainbow patterns until it receives ART-net data | ||
* Displays ART-net pixel data in realtime | * Displays ART-net pixel data in realtime | ||
* Compatible with | * Compatible with QLC+, Madrix, Glediator and other Software that outputs ART-net data. | ||
== Who == | == Who == | ||
Aktuelle Version vom 25. November 2016, 17:57 Uhr
What
EXPERIMENTAL PROTOTYPE, NOT A FINAL PRODUCT/DESIGN YET
ESP-12F Module on custom board inside a snuggly fitting enclosure.
Hardware features:
- ESP-12F
- 3mm RED statusled
- 5-12V inout voltage tolerant
- 3.3V supply voltage internally
- 5V signal conversion fit FETs for 2 GPIO channels (CLK,DAT)
- Enclosure 36mm x 36mm x 15mm
- NO button ;)
Software features:
- Fully web configureable
- Opens Accesspoint with a Captive Portal (zero configuration)
- Once configured it automatically connects to your WLAN and displays fancy rainbow patterns until it receives ART-net data
- Displays ART-net pixel data in realtime
- Compatible with QLC+, Madrix, Glediator and other Software that outputs ART-net data.
Who
- Overflo - idea, electronics, firmware
Source
Photos
 |
 |
 |
References / Links
- Blinkybutton (hackerspaceshop)
- Used with Blinkentunnel_2.0
TBD