Blinkybutton: Unterschied zwischen den Versionen
aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Zur Navigation springenZur Suche springen (→Photos) |
|||
| Zeile 8: | Zeile 8: | ||
* 3.3V supply voltage internally | * 3.3V supply voltage internally | ||
* 5V signal conversion fit FETs for 2 GPIO channels (CLK,DAT) | * 5V signal conversion fit FETs for 2 GPIO channels (CLK,DAT) | ||
| − | + | * Enclosure 36mm x 36mm x 15mm | |
| + | |||
Software features: | Software features: | ||
* Fully web configureable | * Fully web configureable | ||
| Zeile 14: | Zeile 15: | ||
* Once configured it automatically connects to your WLAN and displays fancy rainbow patterns until it receives ART-net data | * Once configured it automatically connects to your WLAN and displays fancy rainbow patterns until it receives ART-net data | ||
* Displays ART-net pixel data in realtime | * Displays ART-net pixel data in realtime | ||
| − | * Compatible with | + | * Compatible with QLC+, Madrix, Glediator and other Software that outputs ART-net data. |
== Who == | == Who == | ||
Version vom 24. November 2016, 15:39 Uhr
What
ESP-12F Module on custom board inside a snuggly fitting enclosure.
Hardware features:
- ESP-12F
- 3mm RED statusled
- 5-12V inout voltage tolerant
- 3.3V supply voltage internally
- 5V signal conversion fit FETs for 2 GPIO channels (CLK,DAT)
- Enclosure 36mm x 36mm x 15mm
Software features:
- Fully web configureable
- Opens Accesspoint with a Captive Portal (zero configuration)
- Once configured it automatically connects to your WLAN and displays fancy rainbow patterns until it receives ART-net data
- Displays ART-net pixel data in realtime
- Compatible with QLC+, Madrix, Glediator and other Software that outputs ART-net data.
Who
- Overflo - idea, electronics, firmware
Source
Photos
References / Links
- Blinkybutton (hackerspaceshop)
- Used with Blinkentunnel_2.0
TBD
