https://metalab.at/wiki/api.php?action=feedcontributions&user=Chrysn&feedformat=atom
Metalab Wiki - Benutzerbeiträge [de]
2024-03-19T04:02:34Z
Benutzerbeiträge
MediaWiki 1.35.13
https://metalab.at/wiki/index.php?title=Laser/Experiments&diff=75506
Laser/Experiments
2023-09-11T12:07:04Z
<p>Chrysn: Linking to test file used with parameters</p>
<hr />
<div>== about ==<br />
This section explores different possibilities of parameters and their outcome.<br />
This is a good place to get you an idea on how to fine tune your parameters.<br />
<br />
Material:<br />
<br />
* The material<br />
** different parameters 1<br />
** different parameters 2<br />
** different parameters 3<br />
<br />
* Soap<br />
** engraving a soap ended in the soap swelling, or so I’ve heard.<br />
<br />
* Leather<br />
** Got a 1,5mm raw dark-brown leather, cutting goes incredibly well, but on one side it goes better then on the other. Speed: 45 or 40, Power: 100, Freq.: 2500<br />
** Engraving is not soo good, you can see the engraved parts, but only on 100/100, and then its not even black or something... May this depends on your leather<br />
<br />
* Thin felt ([http://www.creativehobbiesgroup.com/product/8436460 knorrprandel Bogen 1mm])<br />
** Speed 100%<br />
** Power 10%<br />
** Pulse frequency 2500Hz<br />
* Less thin felt (de: Filz), about 3mm<br />
** Cutting: Speed 90%, Power 20%<br />
** Engraving: more experiments to be done, but note: large black areas will melt the material deeply, thin lines will result in very betauful printing on the material (I used red felt, engraving on dark/brown/black felt might not make much sense)<br />
<br />
* Jeans / Denim<br />
** engraving: 60% speed, 60% power.<br />
** engraving of denim glued onto wood: 60% speed, 100% power gets almost through the cloth and makes the wood partially visible.<br />
** cutting of denim glued onto wood: just cut a bit slower than through the wood alone (e.g. 15% speed instead of 20% speed)<br />
<br />
== ideas ==<br />
* making a example raster / vector file for experimental cuts<br />
** using color mapping for different speed/power/frequency in one job. One example is [[:Datei:slowdowntest.svg]], see also [[Laser/Parameters#Notes on engraving vector lines]].<br />
<br />
<br />
== settings for circuit boards ==<br />
* montana black 312g net/11 oz. blue spray paint use speed 50%, power 100% and 5000hz<br />
<br />
[[Kategorie:English]]<br />
[[Kategorie:Lazzzor]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=Laser/Parameters&diff=75470
Laser/Parameters
2023-09-06T13:49:06Z
<p>Chrysn: Link to slowdowntest in the engraving vector notes</p>
<hr />
<div>{{Head_en}}<br />
<br />
Verified parameters for the 100W BRM lasercutter:<br />
<br />
{| class="wikitable" style="text-align: center;"<br />
! Material<br />
! Cut Speed (mm/s)<br />
! Cut Power<br />
! Engrave Speed (mm/s)<br />
! Engrave Power<br />
! Comments<br />
|-<br />
|Black granite<br />
|n/a<br />
|n/a<br />
|300<br />
|50%<br />
|<br />
|-<br />
|Linen cloth<br />
|300<br />
|70%<br />
|n/a<br />
|n/a<br />
|<br />
|-<br />
|Finnboard/Finnpappe 4mm<br />
|25<br />
|98%<br />
|?<br />
|?<br />
|<br />
|-<br />
|Buchbinderpappe 0,5mm<br />
|110<br />
|98%<br />
|?<br />
|?<br />
|2023 maxvalue<br />
|-<br />
|Plywood birch 3mm<br />
|10-35<br />
|95%<br />
|250<br />
|30<br />
|Does cut properly with 35mm/s but in some places <10mm/s are required.<br />
|-<br />
|Ikea PP Dosen<br />
|x<br />
|x<br />
|200<br />
|30<br />
|10mm Fokusabstand<br />
|-<br />
|Polyesterstoff<br />
|150<br />
|70%<br />
|?<br />
|?<br />
|Fokus ist schwierig...<br />
|-<br />
|Spacecraft Multi Layer Insulation<br />
|100<br />
|80%<br />
|?<br />
|?<br />
|Can occasionally melt together again after cutting<br />
<br />
|-<br />
|Cork 5mm (Kork-Matte)<br />
|20m<br />
|100-100%<br />
|?<br />
|?<br />
|<br />
<br />
|-<br />
|Plywood for "engraving" vector lines<br />
|150<br />
|7.5-37.5%<br />
|n/a<br />
|n/a<br />
|See [[Laser/Parameters#Notes_on_engraving_vector_lines|below]]<br />
<br />
|}<br />
<br />
Attraktor hat den gleichen Lasercutter, [https://wiki.attraktor.org/Lasercutter deren Wiki hat viele Parametervorschlaege].<br />
<br />
== Notes on engraving vector lines ==<br />
<br />
When using the "cut" mode to scratch thin lines into a surface<br />
(say, outlines of fields in a board game, when the full board is cut through),<br />
the laser is moved at high speeds (say, 150mm/s) with low power,<br />
but slows down when lines are bent too tightly.<br />
This is where the minimum cut power shines:<br />
The cutter will reduce power as it speeds down,<br />
to avoid burning through the material.<br />
If you set the lower bound too low,<br />
lines will get lost where it slows down<br />
(because the effect on the material is not linear,<br />
and 1% may not do anything at all any more).<br />
If you set it too high,<br />
the prolonged exposure on a single spot can send the laser all through the material.<br />
<br />
For test cuts, take a coarse and a fine sample from your picture.<br />
<br />
A practical test file is [[:Datei:Slowdowntest.svg|slowdowntest]],<br />
which has multiple colors to try out different settings,<br />
and lines of varying curvature to see the effects.</div>
Chrysn
https://metalab.at/wiki/index.php?title=Datei:Slowdowntest.svg&diff=75469
Datei:Slowdowntest.svg
2023-09-06T13:46:45Z
<p>Chrysn: </p>
<hr />
<div>Test file for the laser cutter. Assign different minimum powers (or other parameters related to it) to the colors. It shows the effect the slowdown of the laser around bent parts has on its cutting.</div>
Chrysn
https://metalab.at/wiki/index.php?title=Laser/Parameters&diff=75468
Laser/Parameters
2023-09-06T13:42:42Z
<p>Chrysn: Fix internal link</p>
<hr />
<div>{{Head_en}}<br />
<br />
Verified parameters for the 100W BRM lasercutter:<br />
<br />
{| class="wikitable" style="text-align: center;"<br />
! Material<br />
! Cut Speed (mm/s)<br />
! Cut Power<br />
! Engrave Speed (mm/s)<br />
! Engrave Power<br />
! Comments<br />
|-<br />
|Black granite<br />
|n/a<br />
|n/a<br />
|300<br />
|50%<br />
|<br />
|-<br />
|Linen cloth<br />
|300<br />
|70%<br />
|n/a<br />
|n/a<br />
|<br />
|-<br />
|Finnboard/Finnpappe 4mm<br />
|25<br />
|98%<br />
|?<br />
|?<br />
|<br />
|-<br />
|Buchbinderpappe 0,5mm<br />
|110<br />
|98%<br />
|?<br />
|?<br />
|2023 maxvalue<br />
|-<br />
|Plywood birch 3mm<br />
|10-35<br />
|95%<br />
|250<br />
|30<br />
|Does cut properly with 35mm/s but in some places <10mm/s are required.<br />
|-<br />
|Ikea PP Dosen<br />
|x<br />
|x<br />
|200<br />
|30<br />
|10mm Fokusabstand<br />
|-<br />
|Polyesterstoff<br />
|150<br />
|70%<br />
|?<br />
|?<br />
|Fokus ist schwierig...<br />
|-<br />
|Spacecraft Multi Layer Insulation<br />
|100<br />
|80%<br />
|?<br />
|?<br />
|Can occasionally melt together again after cutting<br />
<br />
|-<br />
|Cork 5mm (Kork-Matte)<br />
|20m<br />
|100-100%<br />
|?<br />
|?<br />
|<br />
<br />
|-<br />
|Plywood for "engraving" vector lines<br />
|150<br />
|7.5-37.5%<br />
|n/a<br />
|n/a<br />
|See [[Laser/Parameters#Notes_on_engraving_vector_lines|below]]<br />
<br />
|}<br />
<br />
Attraktor hat den gleichen Lasercutter, [https://wiki.attraktor.org/Lasercutter deren Wiki hat viele Parametervorschlaege].<br />
<br />
== Notes on engraving vector lines ==<br />
<br />
When using the "cut" mode to scratch thin lines into a surface<br />
(say, outlines of fields in a board game, when the full board is cut through),<br />
the laser is moved at high speeds (say, 150mm/s) with low power,<br />
but slows down when lines are bent too tightly.<br />
This is where the minimum cut power shines:<br />
The cutter will reduce power as it speeds down,<br />
to avoid burning through the material.<br />
If you set the lower bound too low,<br />
lines will get lost where it slows down<br />
(because the effect on the material is not linear,<br />
and 1% may not do anything at all any more).<br />
If you set it too high,<br />
the prolonged exposure on a single spot can send the laser all through the material.<br />
<br />
For test cuts, take a coarse and a fine sample from your picture.</div>
Chrysn
https://metalab.at/wiki/index.php?title=Laser/Parameters&diff=75467
Laser/Parameters
2023-09-06T13:41:10Z
<p>Chrysn: Collect experience from yesterday's cutting</p>
<hr />
<div>{{Head_en}}<br />
<br />
Verified parameters for the 100W BRM lasercutter:<br />
<br />
{| class="wikitable" style="text-align: center;"<br />
! Material<br />
! Cut Speed (mm/s)<br />
! Cut Power<br />
! Engrave Speed (mm/s)<br />
! Engrave Power<br />
! Comments<br />
|-<br />
|Black granite<br />
|n/a<br />
|n/a<br />
|300<br />
|50%<br />
|<br />
|-<br />
|Linen cloth<br />
|300<br />
|70%<br />
|n/a<br />
|n/a<br />
|<br />
|-<br />
|Finnboard/Finnpappe 4mm<br />
|25<br />
|98%<br />
|?<br />
|?<br />
|<br />
|-<br />
|Buchbinderpappe 0,5mm<br />
|110<br />
|98%<br />
|?<br />
|?<br />
|2023 maxvalue<br />
|-<br />
|Plywood birch 3mm<br />
|10-35<br />
|95%<br />
|250<br />
|30<br />
|Does cut properly with 35mm/s but in some places <10mm/s are required.<br />
|-<br />
|Ikea PP Dosen<br />
|x<br />
|x<br />
|200<br />
|30<br />
|10mm Fokusabstand<br />
|-<br />
|Polyesterstoff<br />
|150<br />
|70%<br />
|?<br />
|?<br />
|Fokus ist schwierig...<br />
|-<br />
|Spacecraft Multi Layer Insulation<br />
|100<br />
|80%<br />
|?<br />
|?<br />
|Can occasionally melt together again after cutting<br />
<br />
|-<br />
|Cork 5mm (Kork-Matte)<br />
|20m<br />
|100-100%<br />
|?<br />
|?<br />
|<br />
<br />
|-<br />
|Plywood for "engraving" vector lines<br />
|150<br />
|7.5-37.5%<br />
|n/a<br />
|n/a<br />
|See below<br />
<br />
|}<br />
<br />
Attraktor hat den gleichen Lasercutter, [https://wiki.attraktor.org/Lasercutter deren Wiki hat viele Parametervorschlaege].<br />
<br />
== Notes on engraving vector lines ==<br />
<br />
When using the "cut" mode to scratch thin lines into a surface<br />
(say, outlines of fields in a board game, when the full board is cut through),<br />
the laser is moved at high speeds (say, 150mm/s) with low power,<br />
but slows down when lines are bent too tightly.<br />
This is where the minimum cut power shines:<br />
The cutter will reduce power as it speeds down,<br />
to avoid burning through the material.<br />
If you set the lower bound too low,<br />
lines will get lost where it slows down<br />
(because the effect on the material is not linear,<br />
and 1% may not do anything at all any more).<br />
If you set it too high,<br />
the prolonged exposure on a single spot can send the laser all through the material.<br />
<br />
For test cuts, take a coarse and a fine sample from your picture.</div>
Chrysn
https://metalab.at/wiki/index.php?title=2022-07-26_Jour_Fixe&diff=72523
2022-07-26 Jour Fixe
2022-07-23T11:31:15Z
<p>Chrysn: /* Themen */ Metalab meets Paddelklub Edelweiss</p>
<hr />
<div>Der Jour Fixe ist das '''für alle offene Metalab-Koordinationstreffen''', das <span style="color:red">'''jeden 2. Mittwoch sowie jeden 4. Dienstag im Monat um 19:30'''</span> stattfindet (siehe [[2016-09-29_Jour_Fixe|dieser JF-Beschluss]]). Das Treffen ist '''offen, ad-hoc, hands-on und ergebnisorientiert''' - wenn beim Jour Fixe etwas angesprochen wird, das sofort umgesetzt werden kann, wird es auch sofort oder gleich nach dem Jour Fixe umgesetzt! (Das nennen wir dann ''Do-Fixe'')<br />
<br />
Übliche Programmpunkte bei einem Jour Fixe: ''Laufende Entwicklungen, geplante Projekte, Veranstaltungen, Probleme, Lösungen, organisatorische Themen, Neuigkeiten, etc. ....''; Fester Programmpunkt bei jedem Jour Fixe: Durchschauen der aktuellen Tickets im [https://metalab.at/issues Issue Tracker] und durchführen allfälliger [[Wartung]]!<br />
<br />
In diesem Sinne: '''Kein Metalab ohne helfende Hände!''' - Kommt vorbei, tauscht euch aus, und macht euch die Hände schmutzig :) <br />
<br />
Damit alle, die den Jour Fixe verpassen auch am aktuellen Stand bleiben, dokumentieren wir den Jour Fixe. <br />
Wenn du also einen Programmpunkt für diesen Jour Fixe hast, trag ihn bis '''drei Tage''' vor dem JF (Samstag falls JF am Dienstag, Sonntag falls JF am Mittwoch) ein. '''Wie [[2016-08-11_Jour_Fixe| hier]] beschlossen, werden danach eingetragene Themen nicht behandelt.'''<br />
<br />
= Datum =<br />
Dienstag '''2022-07-26, 19:30''' https://pads.c3w.at/pad/#/2/pad/edit/V0rIAZP6dF+EQnwCy4XVBBd4/<br />
<br />
= Ort =<br />
Das Metalab oder hybrid im [https://bbb.metalab.at/b/ees-c9v-owl-j0b Big Blue Button]<br><br />
Das Big Blue Button wird um 19:30 kontrolliert. Wenn um diese Zeit jemand online ist, so findet das JF im Hybrid-Modus statt, sonst nur lokal. Das hybride JF beginnt um 19:45. <br />
<br />
= Organisatorisches =<br />
Schriftführung: [[Benutzer:you|you]]<br />
<br><br />
Moderation: [[Benutzer:you|you]]<br />
<br />
= Berichte =<br />
== Bericht1 ([[Benutzer:you|you]]) ==<br />
An dieser Stelle folgt dein Bericht zu einem Projekt oder einer Veranstaltung aus dem Metalab!<br />
== Bericht2 ([[Benutzer:you|you]]) ==<br />
<br />
= Themen =<br />
== Metalab x Paddelklub Edelweiss: Thermopresse ausleihen ([[Benutzer:chrysn|chrysn]]) ==<br />
<br />
trt und [[user:chrysn|chrysn]] ("wir") haben für den [http://paddelklub.at/ Paddelklub Edelweiss (PKE)] einiges an Klebefoliendingen mit Logos für Beschriftungen gemacht,<br />
und möchten an dessen Bootshausfest am ''3. September'' (mitten am Metalab-Straßenfest) dort eine T-Shirt-Druck-Station machen.<br />
<br />
Dafür würden wir gerne die Thermopresse für einen Tag ausleihen.<br />
<br />
Geplanter Ablauf:<br />
* wir cutten PKE-Logos und -schriftzüge, wenn JF und PKE-Vorstand die Aktion freigegeben haben.<br />
* wir holen die Presse am 2. ab und retournieren sie am 4. (wenn's mit dem Straßenfest günstiger ist, das weiter oder enger zu fassen, geht beides).<br />
* beim PKE-Bootshausfest können Leute diese auf mitgebrachte T-Shirts, Hoodies, Beutel etc. aufpressen. Die Pressstation wird von uns, anderen Metalabbern (auf der letzten Wildflussausfahrt waren's vier) oder geeignet eingeschulten PKElern beaufsichtigt.<br />
<br />
Dürfen wir die Thermopresse dafür ausleihen?<br />
<br />
== Thema2 ([[Benutzer:you|you]]) ==<br />
Description2<br />
<br />
= Protokoll =<br />
<br />
== Berichte: ==<br />
=== Bericht1 ===<br />
=== Bericht2 ===<br />
== Themen: ==<br />
=== Thema1 ===<br />
=== Thema2 ===<br />
<br />
= Tickets und Wartung: =<br />
Nach dem Jour Fixe sollten die aktuellen Tickets am Kanban sowie anfallende [[Wartung|Wartungsarbeiten]] angesehen werden. Wenn du dich in der Lage fühlst einen der offenen Punkte abzuarbeiten wäre es fein, wenn du dies auch machst, ansonsten finde die Person, die den offenen Punkt abarbeiten kann und die nötige Kapazität dafür hat.<br />
<br />
[[Kategorie:Jour_Fixe]]<br />
[[Kategorie:Protokolle]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=2022-07-26_Jour_Fixe&diff=72522
2022-07-26 Jour Fixe
2022-07-23T10:56:23Z
<p>Chrysn: Jour Fixe lt. template angelegt; Datum und Link ausgefüllt</p>
<hr />
<div>Der Jour Fixe ist das '''für alle offene Metalab-Koordinationstreffen''', das <span style="color:red">'''jeden 2. Mittwoch sowie jeden 4. Dienstag im Monat um 19:30'''</span> stattfindet (siehe [[2016-09-29_Jour_Fixe|dieser JF-Beschluss]]). Das Treffen ist '''offen, ad-hoc, hands-on und ergebnisorientiert''' - wenn beim Jour Fixe etwas angesprochen wird, das sofort umgesetzt werden kann, wird es auch sofort oder gleich nach dem Jour Fixe umgesetzt! (Das nennen wir dann ''Do-Fixe'')<br />
<br />
Übliche Programmpunkte bei einem Jour Fixe: ''Laufende Entwicklungen, geplante Projekte, Veranstaltungen, Probleme, Lösungen, organisatorische Themen, Neuigkeiten, etc. ....''; Fester Programmpunkt bei jedem Jour Fixe: Durchschauen der aktuellen Tickets im [https://metalab.at/issues Issue Tracker] und durchführen allfälliger [[Wartung]]!<br />
<br />
In diesem Sinne: '''Kein Metalab ohne helfende Hände!''' - Kommt vorbei, tauscht euch aus, und macht euch die Hände schmutzig :) <br />
<br />
Damit alle, die den Jour Fixe verpassen auch am aktuellen Stand bleiben, dokumentieren wir den Jour Fixe. <br />
Wenn du also einen Programmpunkt für diesen Jour Fixe hast, trag ihn bis '''drei Tage''' vor dem JF (Samstag falls JF am Dienstag, Sonntag falls JF am Mittwoch) ein. '''Wie [[2016-08-11_Jour_Fixe| hier]] beschlossen, werden danach eingetragene Themen nicht behandelt.'''<br />
<br />
= Datum =<br />
Dienstag '''2022-07-26, 19:30''' https://pads.c3w.at/pad/#/2/pad/edit/V0rIAZP6dF+EQnwCy4XVBBd4/<br />
<br />
= Ort =<br />
Das Metalab oder hybrid im [https://bbb.metalab.at/b/ees-c9v-owl-j0b Big Blue Button]<br><br />
Das Big Blue Button wird um 19:30 kontrolliert. Wenn um diese Zeit jemand online ist, so findet das JF im Hybrid-Modus statt, sonst nur lokal. Das hybride JF beginnt um 19:45. <br />
<br />
= Organisatorisches =<br />
Schriftführung: [[Benutzer:you|you]]<br />
<br><br />
Moderation: [[Benutzer:you|you]]<br />
<br />
= Berichte =<br />
== Bericht1 ([[Benutzer:you|you]]) ==<br />
An dieser Stelle folgt dein Bericht zu einem Projekt oder einer Veranstaltung aus dem Metalab!<br />
== Bericht2 ([[Benutzer:you|you]]) ==<br />
<br />
= Themen =<br />
== Thema1 ([[Benutzer:you|you]]) ==<br />
Hi, I've got a fancy description with [[Wiki-Links]] and [http://example.org External] Links<br />
== Thema2 ([[Benutzer:you|you]]) ==<br />
Description2<br />
<br />
= Protokoll =<br />
<br />
== Berichte: ==<br />
=== Bericht1 ===<br />
=== Bericht2 ===<br />
== Themen: ==<br />
=== Thema1 ===<br />
=== Thema2 ===<br />
<br />
= Tickets und Wartung: =<br />
Nach dem Jour Fixe sollten die aktuellen Tickets am Kanban sowie anfallende [[Wartung|Wartungsarbeiten]] angesehen werden. Wenn du dich in der Lage fühlst einen der offenen Punkte abzuarbeiten wäre es fein, wenn du dies auch machst, ansonsten finde die Person, die den offenen Punkt abarbeiten kann und die nötige Kapazität dafür hat.<br />
<br />
[[Kategorie:Jour_Fixe]]<br />
[[Kategorie:Protokolle]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=Pick%26Place&diff=67658
Pick&Place
2019-06-28T06:57:20Z
<p>Chrysn: Beitrag zur Pick&Place</p>
<hr />
<div>{{Head_en}}<br />
<br />
= Pick & Place Machine =<br />
<br />
[https://www.youtube.com/watch?v=T_v2VJKNZQ0 Liteplacer Introduction Video]<br />
<br />
Metalab will be buying the DIY pick&place machine shown in the video behind the link above for deployment in the [[Elektroniklabor|Electronics Lab]]. Half of the machines price will be covered by donations. If you think that buying the machine is a good idea and/or want to contribute, here's the list to financially support it:<br />
<br />
{| class="wikitable"<br />
|+Contributors<br />
!Name<br />
!Amount<br />
!Paid<br />
|-<br />
| [[User:anlumo|anlumo]]<br />
| €50<br />
| {{No}}<br />
|-<br />
| [[User:redplanet|redplanet]]<br />
| €42<br />
| {{Yes}}<br />
|-<br />
| [[User:consti|consti]]<br />
| €100<br />
| {{Yes}}<br />
|-<br />
| [[User:zwax|Zwax]]<br />
| €42<br />
| {{No}}<br />
|-<br />
| [[User:ripper|ripper]]<br />
| €50<br />
| {{No}}<br />
|-<br />
| [[User:Herbert|Herbert]]<br />
| €50<br />
| {{No}}<br />
|-<br />
| [[User:datacop|datacop]]<br />
| €75<br />
| {{No}}<br />
|-<br />
| [[User:chrysn|chrysn]]<br />
| €75<br />
| {{Yes}}<br />
|-<br />
| ''Your name here''<br />
| ''€10000000''<br />
| {{Yes}}<br />
|-<br />
| bgcolor="lightgrey"| Total<br />
| bgcolor="lightgrey"| 390€/650€<br />
| bgcolor="lightgrey"| <br />
|}</div>
Chrysn
https://metalab.at/wiki/index.php?title=MetaFunk/Amateurfunkkurs/MetaKurs2019&diff=67222
MetaFunk/Amateurfunkkurs/MetaKurs2019
2019-04-14T20:43:26Z
<p>Chrysn: /* Wer hat Interesse teilzunehmen? */ noch ein teilnehmer</p>
<hr />
<div>= Amateurfunk-Kurs 2019 im Metalab =<br />
<br />
__TOC__<br />
<br />
Das Ergebnis der Prüfungen nach dem MetaKurs 2018:<br />
[[Datei:PRFG 20181009.jpg|600px|thumb|left|nach erfolgreicher Prüfung ...]]<br />
<br />
<br />
<br />
Im Jänner 2010 wurde unser [[MetaFunk/Amateurfunkkurs/MetaKurs2009-2010|erster Amateurfunkkurs]] erfolgreich abgeschlossen. <br />
Seitdem gestalten wir jedes Jahr einen Kurs zur Vorbereitung auf die Amateurfunkprüfung im Metalab.<br />
Mitgliedschaft im Metalab ist, wie bei praktisch allen Veranstaltungen, nicht erforderlich (aber erwünscht).<br />
<br />
<br />
{|class="wikitable"<br />
|align ="left" style="border:1px dotted lightgray; border-bottom:1px solid lightgray;padding:1em;"|<br />
Zur Einstimmung gibt es einen <br />
; Info-Abend am 2019-05-24, 18 Uhr<br />
<br />
* Was ist Amateurfunk im 21. Jahrhundert?<br />
* Wozu hilft die Amateurfunkprüfung?<br />
* Warum gerade jetzt, nach der TKG-Novelle?<br />
|}<br />
<br />
.<br />
<br />
<br />
<br />
== MetaKurs19 ab 2019-05-24, jeweils Freitag 17:00 - 22:00 und Samstag 10:00 - 20:00 Uhr ==<br />
<br />
[[Datei: MetaFunk_Logo.png|right]]<br />
<br />
Noch bevor das geänderte Telekommunikationsgesetz voll wirksam wird bieten wir einen Kurs zur Vorbereitung auf die Amateurfunkprüfung.<br />
Der Kurs wird auch dieses Jahr geblockt an Freitagen und Samstagen im [https://metalab.at/calendar/2019/05/ Metalab ] abgehalten! <br />
<br />
Wir werden jeden Freitag 17:00 bis 22:00 sowie Samstag von 10:00 bis 19:00 Uhr einen Kursabend gestalten.<br />
<br />
Fr 2019-05-24<br />
Sa 2019-05-25<br />
Fr 2019-05-31<br />
Sa 2019-06-01<br />
Fr 2019-06-07<br />
Sa 2019-06-08<br />
Fr 2019-06-14<br />
Sa 2019-06-15<br />
Fr 2019-06-21<br />
Sa 2019-06-22<br />
<br />
Die Prüfung findet in der Folgewoche im Fernmeldebüro Wien statt. <br />
Für den unmittelbar danach anstehenden Prüfungstermin sind nur wenige Plätze frei, daher bitte rasch anmelden!<br />
<br />
Wenn '''DU''' dich ebenfalls dafür interessierst, bitte einfach [[MetaKurs18#Wer_hat_Interesse_teilzunehmen.3F|unten eintragen]]. <br />
<br />
Sorge bitte dafür, dass wir Dich erreichen können, am besten über die [https://lists.metalab.at/mailman/listinfo/metafunk MetaFunk Mailingliste].<br />
<br />
<br />
Wir bereiten gezielt auf den "''Nachweis der Kenntnisse und Fertigkeiten''" gegenüber der Fernmeldebehörde vor. <br />
<br />
* Damit ist es möglich, eine Amateurfunklizenz zu beantragen.<br />
* Lizenzierten Funkamateuren steht es frei, Funkanlagen (Funkgeräte) selbst zu bauen und zu betreiben.<br />
* Was man da so alles treiben kann --> [[Metaday 26]] und [[MetaFunk]] und Einführungsabend am 5.9.2018<br />
* Welche Frequenzen und Betriebsarten zulässig sind, ist in der [[:Bild:Amateurfunk-Frequenzen.pdf|Amateurfunk-Verordnung]] festgelegt.<br />
* Die offizielle Info der Fernmeldebehörde: [[:Bild:Amateurfunkinfo_FMB.pdf|Amateurfunkinfo_FMB.pdf]]<br />
<br />
<br />
=== Ablauf ===<br />
<br />
Als Mindest-Stunden für diese Vorbereitung hat sich bewährt:<br />
<br />
* 9 Stunden Recht<br />
* 12 Stunden Technik<br />
* 12 Stunden Betrieb und Fertigkeiten<br />
<br />
Den Teil "Technik" werden wir für Metalaber komprimiert gestalten können.<br />
<br />
<br />
[[Datei:Kursunterlagen_Amateurfunk.gif|right]]<br />
=== Unterlagen ===<br />
<br />
Alle Teilnehmer erhalten die [[MetaFunk/Amateurfunkkurs/Kursunterlagen|Kursunterlagen]]<br />
<br />
* Slides der Vortragenden, <br />
* einen [[MetaFunk/Amateurfunkkurs/Anki-Zettelkasten|online-Zettelkasten]], auch für das [http://ankisrs.net/ ANKI-Lernsystem]<br />
<br />
* Wer gerne Papier hat, kann Kursunterlagen beim [http://webshop.oevsv.at/ ÖVSV-Webshop] kaufen. Wir werden auch ein paar Exemplare davon auflegen.<br />
<br />
<br />
=== Kosten ===<br />
<br />
Beim [http://www.oevsv.at/ ÖVSV] (Österreichischer Versuchssenderverband) kostet so ein Kurs 70 Euronen, fürs Metalab wird es einen interessanten '''Sonderpreis für MetaFunker''' geben<br />
<br />
<br />
=== Vortragende ===<br />
<br />
Unsere bestens bewährten Vortragenden werden uns hoffentlich auch diesmal unterstützen: <br />
<br />
<br />
* '''Harald''', [[Benutzer:oe3hbs|OE3HBS]] - Betriebstechnik<br />
* '''Herbert''', [[Benutzer:Herbert|OE1HWS]] - Recht<br />
* '''Clemens''', [[Benutzer:datacop|OE1RFC]] - Technik<br />
<br />
<br />
Betreut wird der Kurs von [[Benutzer:Herbert|OE1HWS]] und [[Benutzer:oe3hbs|OE3HBS]].<br />
<br />
=== Links ===<br />
<br />
* Wer schon mal reinschnuppern will:<br />
* [http://webshop.oevsv.at Webshop des OEVSV] (Österr. VersuchsenderVerband) : hier gibts die "offiziellen" Skripten für jene, die das gedruckt erwerben wollen (für uns gilt CEPT1).<br />
* [http://afukurs.oevsv.at/ Online-Info anfordern] beim ÖVSV: lt. OE3MZC, Mike Zwingl<br />
* Skriptum als PDF [http://www.oevsv.at/opencms/newcomer/Lernskriptum.html zum Download] (kostenlose Registrierung nötig)<br />
* zum Nachschlagen [http://www.bmvit.gv.at/telekommunikation/funk/funkdienste/amateur/index.html beim BMVIT]<br />
*[[MetaFunk/Funkgeräte|Funkgeräte]] Ein paar allgemeine Infos und Links zu Funkgeräten<br />
*[[MetaFunk/Amateurfunkkurs/MetaKurs2014|MetaKurs 2014]]<br />
*[[MetaFunk/Amateurfunkkurs/MetaKurs2015|MetaKurs 2015]]<br />
*[[MetaFunk/Amateurfunkkurs/MetaKurs2016|MetaKurs 2016]]<br />
*[[MetaFunk/Amateurfunkkurs/MetaKurs2017|MetaKurs 2017]]<br />
*[[MetaFunk/Amateurfunkkurs/MetaKurs2018|MetaKurs 2018]]<br />
<br />
=== Wer hat Interesse teilzunehmen? ===<br />
<br />
Einen Kurs wird es nur geben wenn wir auch Kursteilnehmer/innnen haben, sonst lohnt sich der Aufwand nicht. Also wenn Du schon immer mal einen Kurs besuchen wolltest, trage dich bitte hier in die Liste ein und melde dich bei der [https://lists.metalab.at/mailman/listinfo/metafunk MetaFunk Mailingliste] an.<br />
<br />
<small>(hast Du noch keinen Wiki-Account, schreib eine Mail an [[Datei:core.png]] mit dem Wunsch einer Wiki-Account Registrierung '''samt gewünschtem Username''')</small><br />
<br />
# [[User:Erwin|Erwin]]<br />
# Martin (eingetragen via [[User:albert|albert]]<br />
# [[User:chrysn|chrysn]] (auch wenn er mit den Terminen ein paar Konflikte hat)<br />
# Andreas<br />
<br />
# … Du?<br />
<br />
<br />
<br />
[[Kategorie:MetaFunk|MetaFunk_Kurs2019]]<br />
[[Kategorie:Workshops|MetaFunk_Kurs2019]]<br />
[[Kategorie:Veranstaltungen|MetaFunk_Kurs2019]]<br />
[[Kategorie:Projekte|MetaKurs19]]<br />
<br />
[[Kategorie:Workshops]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=MetaFunk/Amateurfunkkurs/MetaKurs2019&diff=67104
MetaFunk/Amateurfunkkurs/MetaKurs2019
2019-03-21T20:16:28Z
<p>Chrysn: Interesse an Kursteilnahme</p>
<hr />
<div>= Amateurfunk-Kurs 2019 im Metalab =<br />
<br />
__TOC__<br />
<br />
Das Ergebnis der Prüfungen nach dem MetaKurs 2018:<br />
[[Datei:PRFG 20181009.jpg|600px|thumb|left|nach erfolgreicher Prüfung ...]]<br />
<br />
<br />
<br />
Im Jänner 2010 wurde unser [[MetaFunk/Amateurfunkkurs/MetaKurs2009-2010|erster Amateurfunkkurs]] erfolgreich abgeschlossen. <br />
Seitdem gestalten wir jedes Jahr einen Kurs zur Vorbereitung auf die Amateurfunkprüfung im Metalab.<br />
Mitgliedschaft im Metalab ist, wie bei praktisch allen Veranstaltungen, nicht erforderlich (aber erwünscht).<br />
<br />
<br />
{|class="wikitable"<br />
|align ="left" style="border:1px dotted lightgray; border-bottom:1px solid lightgray;padding:1em;"|<br />
Zur Einstimmung gibt es einen <br />
; Info-Abend am 2019-05-24, 18 Uhr<br />
<br />
* Was ist Amateurfunk im 21. Jahrhundert?<br />
* Wozu hilft die Amateurfunkprüfung?<br />
* Warum gerade jetzt, nach der TKG-Novelle?<br />
|}<br />
<br />
.<br />
<br />
<br />
<br />
== MetaKurs19 ab 2019-05-24, jeweils Freitag 17:00 - 22:00 und Samstag 10:00 - 20:00 Uhr ==<br />
<br />
[[Datei: MetaFunk_Logo.png|right]]<br />
<br />
Noch bevor das geänderte Telekommunikationsgesetz voll wirksam wird bieten wir einen Kurs zur Vorbereitung auf die Amateurfunkprüfung.<br />
Der Kurs wird auch dieses Jahr geblockt an Freitagen und Samstagen im [https://metalab.at/calendar/2019/05/ Metalab ] abgehalten! <br />
<br />
Wir werden jeden Freitag 17:00 bis 22:00 sowie Samstag von 10:00 bis 19:00 Uhr einen Kursabend gestalten.<br />
<br />
Fr 2019-05-24<br />
Sa 2019-05-25<br />
Fr 2019-05-31<br />
Sa 2019-06-01<br />
Fr 2019-06-07<br />
Sa 2019-06-08<br />
Fr 2019-06-14<br />
Sa 2019-06-15<br />
Fr 2019-06-21<br />
Sa 2019-06-22<br />
<br />
Die Prüfung findet in der Folgewoche im Fernmeldebüro Wien statt. <br />
Für den unmittelbar danach anstehenden Prüfungstermin sind nur wenige Plätze frei, daher bitte rasch anmelden!<br />
<br />
Wenn '''DU''' dich ebenfalls dafür interessierst, bitte einfach [[MetaKurs18#Wer_hat_Interesse_teilzunehmen.3F|unten eintragen]]. <br />
<br />
Sorge bitte dafür, dass wir Dich erreichen können, am besten über die [https://lists.metalab.at/mailman/listinfo/metafunk MetaFunk Mailingliste].<br />
<br />
<br />
Wir bereiten gezielt auf den "''Nachweis der Kenntnisse und Fertigkeiten''" gegenüber der Fernmeldebehörde vor. <br />
<br />
* Damit ist es möglich, eine Amateurfunklizenz zu beantragen.<br />
* Lizenzierten Funkamateuren steht es frei, Funkanlagen (Funkgeräte) selbst zu bauen und zu betreiben.<br />
* Was man da so alles treiben kann --> [[Metaday 26]] und [[MetaFunk]] und Einführungsabend am 5.9.2018<br />
* Welche Frequenzen und Betriebsarten zulässig sind, ist in der [[:Bild:Amateurfunk-Frequenzen.pdf|Amateurfunk-Verordnung]] festgelegt.<br />
* Die offizielle Info der Fernmeldebehörde: [[:Bild:Amateurfunkinfo_FMB.pdf|Amateurfunkinfo_FMB.pdf]]<br />
<br />
<br />
=== Ablauf ===<br />
<br />
Als Mindest-Stunden für diese Vorbereitung hat sich bewährt:<br />
<br />
* 9 Stunden Recht<br />
* 12 Stunden Technik<br />
* 12 Stunden Betrieb und Fertigkeiten<br />
<br />
Den Teil "Technik" werden wir für Metalaber komprimiert gestalten können.<br />
<br />
<br />
[[Datei:Kursunterlagen_Amateurfunk.gif|right]]<br />
=== Unterlagen ===<br />
<br />
Alle Teilnehmer erhalten die [[MetaFunk/Amateurfunkkurs/Kursunterlagen|Kursunterlagen]]<br />
<br />
* Slides der Vortragenden, <br />
* einen [[MetaFunk/Amateurfunkkurs/Anki-Zettelkasten|online-Zettelkasten]], auch für das [http://ankisrs.net/ ANKI-Lernsystem]<br />
<br />
* Wer gerne Papier hat, kann Kursunterlagen beim [http://webshop.oevsv.at/ ÖVSV-Webshop] kaufen. Wir werden auch ein paar Exemplare davon auflegen.<br />
<br />
<br />
=== Kosten ===<br />
<br />
Beim [http://www.oevsv.at/ ÖVSV] (Österreichischer Versuchssenderverband) kostet so ein Kurs 70 Euronen, fürs Metalab wird es einen interessanten '''Sonderpreis für MetaFunker''' geben<br />
<br />
<br />
=== Vortragende ===<br />
<br />
Unsere bestens bewährten Vortragenden werden uns hoffentlich auch diesmal unterstützen: <br />
<br />
<br />
* '''Harald''', [[Benutzer:oe3hbs|OE3HBS]] - Betriebstechnik<br />
* '''Herbert''', [[Benutzer:Herbert|OE1HWS]] - Recht<br />
* '''Clemens''', [[Benutzer:datacop|OE1RFC]] - Technik<br />
<br />
<br />
Betreut wird der Kurs von [[Benutzer:Herbert|OE1HWS]] und [[Benutzer:oe3hbs|OE3HBS]].<br />
<br />
=== Links ===<br />
<br />
* Wer schon mal reinschnuppern will:<br />
* [http://webshop.oevsv.at Webshop des OEVSV] (Österr. VersuchsenderVerband) : hier gibts die "offiziellen" Skripten für jene, die das gedruckt erwerben wollen (für uns gilt CEPT1).<br />
* [http://afukurs.oevsv.at/ Online-Info anfordern] beim ÖVSV: lt. OE3MZC, Mike Zwingl<br />
* Skriptum als PDF [http://www.oevsv.at/opencms/newcomer/Lernskriptum.html zum Download] (kostenlose Registrierung nötig)<br />
* zum Nachschlagen [http://www.bmvit.gv.at/telekommunikation/funk/funkdienste/amateur/index.html beim BMVIT]<br />
*[[MetaFunk/Funkgeräte|Funkgeräte]] Ein paar allgemeine Infos und Links zu Funkgeräten<br />
*[[MetaFunk/Amateurfunkkurs/MetaKurs2014|MetaKurs 2014]]<br />
*[[MetaFunk/Amateurfunkkurs/MetaKurs2015|MetaKurs 2015]]<br />
*[[MetaFunk/Amateurfunkkurs/MetaKurs2016|MetaKurs 2016]]<br />
*[[MetaFunk/Amateurfunkkurs/MetaKurs2017|MetaKurs 2017]]<br />
*[[MetaFunk/Amateurfunkkurs/MetaKurs2018|MetaKurs 2018]]<br />
<br />
=== Wer hat Interesse teilzunehmen? ===<br />
<br />
Einen Kurs wird es nur geben wenn wir auch Kursteilnehmer/innnen haben, sonst lohnt sich der Aufwand nicht. Also wenn Du schon immer mal einen Kurs besuchen wolltest, trage dich bitte hier in die Liste ein und melde dich bei der [https://lists.metalab.at/mailman/listinfo/metafunk MetaFunk Mailingliste] an.<br />
<br />
<small>(hast Du noch keinen Wiki-Account, schreib eine Mail an [[Datei:core.png]] mit dem Wunsch einer Wiki-Account Registrierung '''samt gewünschtem Username''')</small><br />
<br />
# [[User:Erwin|Erwin]]<br />
# Martin (eingetragen via [[User:albert|albert]]<br />
# [[User:chrysn|chrysn]] (auch wenn er mit den Terminen ein paar Konflikte hat)<br />
<br />
# … Du?<br />
<br />
<br />
<br />
[[Kategorie:MetaFunk|MetaFunk_Kurs2019]]<br />
[[Kategorie:Workshops|MetaFunk_Kurs2019]]<br />
[[Kategorie:Veranstaltungen|MetaFunk_Kurs2019]]<br />
[[Kategorie:Projekte|MetaKurs19]]<br />
<br />
[[Kategorie:Workshops]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=Laser/2019-03-08&diff=67055
Laser/2019-03-08
2019-03-13T08:58:27Z
<p>Chrysn: ist gleichzeitig mit aber unabhängig vom PC-Tausch passiert</p>
<hr />
<div>== Ereignisse und Wartungen am Lasercutter 2019-03-08 bis 2019-03-12 ==<br />
<br />
(Parallel dazu haben [[User:ripper|ripper]] und [[User:Pete|Hetti]] den [[Laser/PC]] erneuert.)<br />
<br />
=== 2019-03-08 ===<br />
<br />
Beim Schneiden blieb der Autofokustasktopf an einem Gewicht hängen, wobei dessen innere Feder ausgezerrt wurde; über die Innensechskantschraube am Tastkopf wurden Feder und die beiden unteren Teile (halbkugel- und zylinderförmig) bis auf Weiteres demontiert.<br />
<br />
Was von der Feder noch gemessen werden konnte waren folgende [http://www.salomon-online.at/shop/index.php?cid=126 Parameter]:<br />
<br />
* d = 0.3mm<br />
* De = 3.1mm <br />
* Lo - Lk = 5mm <br />
* ca. 19 Windungen <br />
<br />
Weiters wirkte der Laser schwach und wurde im Lauf des Abends deutlich schwächer (10% speed, 100% power, 500Hz für 4mm Sperrholz am Anfang des Abends, zwei passes 7%/100%/500Hz am Ende).<br />
<br />
<br />
=== 2019-03-10 ===<br />
<br />
Feder probehalber durch eine im Lab vorhandene und zurechtgekürzte ersetzt (d = 0.7mm, De = 3.7mm, Lo = 13.7mm); diese resultierte in einem deutlich zu steifen Taster.<br />
<br />
Im Zuge dessen wurde festgestellt, dass der Air Assist gelockert war. Nach grobem Einstellen und Festziehen der Montageschraube über dem Air Assist war die Laserleistung wieder voll da (20% speed durch 4mm Sperrholz).<br />
<br />
=== 2019-03-12 ===<br />
<br />
Feder ersetzt durch eine von CS zur Verfügung gestellte mit d = 0.29mm, De = 2.99mm und 28 Windungen. Die Feder konnte ohne Veränderungen eingebaut werden.<br />
<br />
Autofokus wurde getestet und funktioniert wieder.</div>
Chrysn
https://metalab.at/wiki/index.php?title=Laser/Mouzzzepad&diff=67053
Laser/Mouzzzepad
2019-03-12T21:00:15Z
<p>Chrysn: Bilder eingefügt</p>
<hr />
<div>Mauspad für den Laser-PC – stilecht lasergefertigt<br />
<br />
[[Bild:DSCN2143.jpg|thumb|240px|Beim Cutten]]<br />
[[Bild:DSCN2146.jpg|thumb|240px|Im Einsatz]]<br />
<br />
* Material: Jeans auf Sperrholz (3mm) geleimt<br />
* Parameter: 60% / 60% Gravur, 5% speed / 100% power / 500Hz Schnitte. (Holz war ein extrem hartes).<br />
* [[:Datei:metalablazzzormouzzzepad.svg|Schnittvorlage]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=Datei:DSCN2146.jpg&diff=67052
Datei:DSCN2146.jpg
2019-03-12T20:58:42Z
<p>Chrysn: </p>
<hr />
<div></div>
Chrysn
https://metalab.at/wiki/index.php?title=Datei:DSCN2143.jpg&diff=67051
Datei:DSCN2143.jpg
2019-03-12T20:58:26Z
<p>Chrysn: </p>
<hr />
<div></div>
Chrysn
https://metalab.at/wiki/index.php?title=Laser/Mouzzzepad&diff=67050
Laser/Mouzzzepad
2019-03-12T20:48:26Z
<p>Chrysn: Speed korrigiert</p>
<hr />
<div>Mauspad für den Laser-PC -- stilecht lasergefertigt<br />
<br />
* Material: Jeans auf Sperrholz (3mm) geleimt<br />
* Parameter: 60% / 60% Gravur, 5% speed / 100% power / 500Hz Schnitte. (Holz war ein extrem hartes).<br />
* [[:Datei:metalablazzzormouzzzepad.svg|Schnittvorlage]]<br />
* Bilder</div>
Chrysn
https://metalab.at/wiki/index.php?title=Laser/Mouzzzepad&diff=67049
Laser/Mouzzzepad
2019-03-12T20:39:22Z
<p>Chrysn: Mauspad dokumentiert</p>
<hr />
<div>Mauspad für den Laser-PC -- stilecht lasergefertigt<br />
<br />
* Material: Jeans auf Sperrholz (3mm) geleimt<br />
* Parameter: 60% / 60% Gravur, 10% speed / 100% power / 500Hz Schnitte.<br />
* [[:Datei:metalablazzzormouzzzepad.svg|Schnittvorlage]]<br />
* Bilder</div>
Chrysn
https://metalab.at/wiki/index.php?title=Datei:Metalablazzzormouzzzepad.svg&diff=67048
Datei:Metalablazzzormouzzzepad.svg
2019-03-12T20:37:58Z
<p>Chrysn: </p>
<hr />
<div></div>
Chrysn
https://metalab.at/wiki/index.php?title=Laser/PC&diff=67047
Laser/PC
2019-03-12T20:33:40Z
<p>Chrysn: Link zum (WIP) Mouzzzepad</p>
<hr />
<div>new laser cuttr station in the works.<br />
<br />
== Hardware ==<br />
* DQ965CO (Socket 775)<br />
* Intel Core 2 Duo E6600 DualCore @ 2.4 GHz (Conroe)<br />
* 6GB DDR2 RAM<br />
* Radeon X1650 256MB RAM<br />
* 500GB Seagate Baracuda 7200.5<br />
* extreme CPU Cooler<br />
* some Power Supply<br />
<br />
== Software ==<br />
* Windows 7 x64<br />
* Corel Draw X6 x64<br />
* Inkscape 0.48.4<br />
* Epilog Driver 8.08<br />
<br />
== Accessories ==<br />
<br />
[[Laser/Mouzzzepad]]<br />
<br />
[[Kategorie:Netzwerk]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=OldLaser&diff=67046
OldLaser
2019-03-12T20:32:57Z
<p>Chrysn: Link zum (WIP) Laser-PC</p>
<hr />
<div>{{Maschinenring}}<br />
{{Head_de}}<br />
{{Machine<br />
|image=Lasercutter.jpg<br />
|owner=Metalab<br />
|status=Aktiv<br />
|requirestraining=Ja<br />
|requiresauth=[[Lazzzorauth|Ja]]<br />
|cost=pro Minute: 1,50€ für Nicht-Mitglieder, 1€ für Mitglieder<br />
|teachers={{Lasermenschen}}<br />
}}<br />
__TOC__<br />
<br />
[[Bild:Lazzzor3943745582 d75e2e9525 o.jpg|thumb|240px|right|Der Lasercutter beim Schneiden von Acryl]]<br />
{|<br />
| Die Soup zum Lazzzor → '''[http://lazzzor.soup.io lazzzor.soup.io]'''<br />
|[[Bild:Soup badge.png|16px]]<br />
|}<br />
<br />
Wir haben einen [https://www.epiloglaser.com/products/l36ext_techspecs.htm Epilog Legend 36EXT] Lasercutter (60 W-Version).<br />
<br />
Generell kann man damit aus einer Vielzahl von Materialien (Holz, viele Kunststoffe, Papier, etc.) beliebige 2D-Formen ausschneiden. Metalle können nur graviert aber nicht geschnitten werden. Der LASER ist auf einen extrem kleinen Punkt fokussiert. Der Schnitt ist dünner als ein Zehntel mm. Was man damit machen kann sieht man z.B. in unserem '''[http://lazzzor.soup.io/ Lazzzor Blog]''' oder bei [http://brepettis.com/blog/category/lazzzor/ Bre Pettis]<br />
<br />
Gesteuert wird der Lasercutter vom [[Laser/PC|Laser-PC]].<br />
<br />
== Willst du etwas lasern?==<br />
[[Laser/Lasern_für_Nicht-Mitglieder|Information zum Lasern für Nicht-Mitglieder]]<br />
<br />
Wenn man etwas mit dem Laser schneiden oder gravieren will dann wendet man sich an [[Datei:core.png]] (''vor allem für dringende Anfragen'') oder besser direkt an einen Lazzzor-Verantwortlichen; Das sind bisher: <br />
{{Lasermenschen}}<br />
<br />
Ausserdem: Die nutzbare Arbeitsfläche ist '''890mmx590mm''' (max. 914x609mm nur mit Vorsicht)<br />
<br />
: <div style="background-color:white; padding:30px 10px;"> Für mehr Informationen was vorzubereiten ist, siehe den [[Laser/How_to_Lazzzor|How to Lazzzor Guide]].</div><br />
<br />
Wenn du '''Lazzzor-Verantwortliche/r''' werden willst musst du das [[Laser Cutter Workshop]] besuchen und die '''Lazzzor-Prüfung''' bestehen.<br />
<br />
== Kosten ==<br />
Für die reine Laserzeit fallen folgende Kosten an:<br />
* 1,00 € pro Minute für Metalab-Mitglieder<br />
* 1,50 € pro Minute für Nichtmitglieder <br />
: <div style="background-color:white; padding:10px;">'''Bitte beachten:''' Der Aufwand für allf. notwendige Aufbereitungshilfe der Dateien und die Zeit des/der Laserbeauftragten ist in diesem Preis '''nicht inkludiert''' und sollte '''vor der Arbeit''' vereinbart werden. Wenn Du einen hilfsbereite Aufsichtsperson gefunden hast, so sprich sie darauf selbständig an. Bedenke, es gibt keine Angestellten und keine Garantien. Das Metalab ist ein Verein der seinen Mitgliedern im Rahmen seiner Zielsetzung mit Infrastruktur versorgen will. Er ist '''nicht als Dienstleister zu verstehen'''.</div><br />
<br />
Zusätzlich zum minutenbasierten Abrechnungsmodell gibt es (derzeit gültig bis 2019-06-13) die Möglichkeit ein Laser-Flatrate Paket zu erwerben. folgende 3 Pakete gibt es: <br />
* 1 Monat um 10€<br />
* 3 Monate um 20€<br />
* 12 Monate um 60€<br />
Den Betrag bitte in ein Kuvert geben, welches mit deinem Namen, dem Datum und einem Vermerk "Laser Flatrate" beschriftet ist und in den Tresor im Hauptraum einwerfen. Die Flatrate ist ab dem Einwurf gültig.<br />
<br />
Die Nutzung der Flatrates ist an einige Bedingungen gebunden:<br />
* Du musst zumindest 6 Monate Mitglied sein<br />
* Keine Komerzielle Nutzung<br />
* Keine Auftragsfertigung<br />
* Keine Serienfertigung<br />
* Einzelne (unaufwändige) Prototypen sind ok<br />
* Nur persönliche Nutzung<br />
Der Jour Fixe-Beschluss zur Flatrate ist unter [[2018-06-13_Jour_Fixe]] nachzulesen.<br />
<br />
Wenn die Initialkosten abbezahlt sind wird der Preis für Metalab-Mitglieder auf die Wartungskosten für den Laser reduziert.<br />
<br />
=== Kassaleerung ===<br />
<br />
Falls die Lazzzor Kassa voll sein sollte, melde dies bitte einem der Lazzzor - Verantwortlichen oder an [[Datei:Core.png]]<br />
<br />
== Was kann man schneiden? ==<br />
* '''Papier/Karton'''<br />
* '''Acryl'''<br />
* '''Holz'''<br />
* '''Moosgummi'''<br />
* '''Filz'''<br />
* grundsätzlich alles, was explizit für Lasercutten vermarktet wird<br />
Zu schneidende Platten sollten nicht dicker als 8-10mm sein (ist abhängig vom Material). Je dicker desto ungenauer wird der Schnitt auch.<br />
<br />
== Was kann man gravieren? ==<br />
* '''Glas''' (inkl. Spiegel)<br />
* '''anodisiertes Aluminium'''<br />
<br />
== Was kann man NICHT schneiden? ==<br />
* '''Metalle''' (auch keine sehr dünnen.)<br />
* '''Polystyrol''' ("Hobbyglas"), giftige gase und unvorteilhaftes brandverhalten [https://de.wikipedia.org/wiki/Polystyrol#Brandverhalten *]<br />
* '''Polyvinylchlorid (PVC)''', denn beim Schneiden dieser Kunststoffe entstehen giftige Gase!<br />
* '''Polycarbonat (PC)''', Polycarbonat ist mit Hitze nicht gut schneidbar, die Kanten verkleben und stinken. <br />
* '''MDF''' (denn der Kleber im MDF verdreckt die Optik extrem schnell)<br />
* https://web.archive.org/web/20100716083933/http://entropie.digital.udk-berlin.de/wiki/Laser_Cutter#What_NOT_to_do_with_a_laser_cutter<br />
* '''Carbonfaserplatten'''. Laserstrahl wird an den Fasern zerstreut, dringt nicht ins Material ein, und heizt bis zum Delaminieren.<br />
<br />
== Was kann man machen / ist möglich? ==<br />
<gallery><br />
Bild:3026073905 cd9c202ce7.jpg<br />
Bild:2949655546 d68f1345d0.jpg<br />
Bild:3049266118 782be12f8e.jpg<br />
Bild:3033540368 a5bea99ae6.jpg<br />
</gallery><br />
* http://www.thingiverse.com/ - ganz tolle sammlung von creativecommons/opensource modellen zum runterladen und selberlasern/reprappen.<br />
* http://www.engraveyourtech.com/ - eine firma die da professionell macht, nette ideen im blog.<br />
* http://www.lasercuttingshapes.com/page/materials<br />
<br />
== Bezugsquellen ==<br />
<p><br />
<br />
{| style="float:right;"<br />
|-<br />
| [[Datei:Sortiment1.jpg|200px|thumb|Materialsamples von plexiglas-shop.com]]||[[Datei:Sortiment2.jpg|200px|thumb|Materialsamples von plexiglas-shop.com]]<br />
|}<br />
=== Stempelgummi ===<br />
* https://www.mastnak.at<br />
<br />
=== Plexi / Acryl / Other ===<br />
* http://shop.transparentdesign.at/ Versand ab 50€ kostenlos, online Formular mit direkter Peiskalkulation<br />
* http://www.acrylstudio.at/<br />
* http://www.graviermaterial.at/ (ab 1m² pro Stärke)<br />
* http://wettlinger.at/<br />
* http://www.plexiglas-shop.com/AT/<br />
* http://hbholzmaus.eshop.t-online.de/ unglaublich günstiges acryl und PETG! <br />
</p><br />
<br />
=== Holz ===<br />
* http://www.fabianholz.at - 6mm Sperrholz Pappel eignet sich gut<br />
* Hornbach in Wien (gute Preise)<br />
<br/><br />
<br/><br />
<br/><br />
<br/><br />
<br />
== Wartung Laser und Filter ==<br />
<br />
{| style="float:right;"<br />
|-<br />
| [[Datei:Schwebstoff_Z-Line_Filter_Kappa.jpeg|200px|thumb|(1) 502204 Z-line panel filter für LN230ZA<br/>(2) 500448 HEPA-Filter H13 für LN230ZA]] || [[Datei:Filteraufbau_Absaugung_Kappa.png|200px|thumb|Filteraufbau der Absaugung]]<br />
|}<br />
<br />
: <div style="background-color:white; padding:10px;">'''Funktioniert der Laser nicht wie er soll? Motiviert dir die Hände schmutzig zu machen?<br />[[Lazzzor/How_to_maintain_Lazzzor|Hier gibts mehr Infos zur Wartung]]'''</div><br />
<br />
=== Drehgeber Datasheet ===<br />
[[Datei:R35i Datasheet.pdf|Datenblatt für den Drehgeber]]<br />
<br />
=== Filteranlage Kappa LN 230-ZA ===<br />
<br />
* [[Media:KappaLN220-230.pdf|Betriebs- und Wartungsanleitung LN 220-230]]<br />
* [[Media:KappaLN220-230Ersatzteilliste.pdf|Ersatzteilliste Filter]]<br />
<br />
'''Nachbestellungen:'''<br />
Kappa Arbeitsschutz & Umwelttechnik GmbH http://www.kappa.at<br />
Kontakt: Marlovits Sandra s.marlovits@kappa.at<br />
<br />
'''Abdeckplatte'''<br />
<br />
Die Lüftung hat eine Abdeckplatte hinten, über die der Abluftschlauch montiert wird. Momentan wird dafür eine gefräste 2mm-Aluplatte verwendet (von Conrad). Das Fräsmuster befindet sich hier: [[Datei:Laserlueftungsplatte.pdf|Laserlüftungsplatte]].<br />
<br />
Wenn ein neuer Schlauch mit einem anderen Durchmesser verwendet werden soll, muss man eine neue Platte herstellen.<br />
<br />
=== Aktivkohle ===<br />
Nr. 3 im Aufbau. Benötigt wird Schüttgut mit einem Pelletdurchmesser von 4mm. Erhältlich bei: <br />
* [https://www.neubers-enkel.at Neubers Enkel] in der Linke Wienzeile 152, 1060 Wien - 22.6.2017: 25kg Sack [http://www.donau-carbon.com/Products---Solutions/Aktivkohle/Produktubersicht/Desorex®.aspx Desorex K47] gekauft<br />
* [http://www.habak.at Habak Lüftungszubehör e.U.] in der Industriestrasse B16, 2345 Brunn Am Gebirge (Haben 25kg Säcke, 1cm mit 4mm ∅, liefern kostenlos)<br />
* [http://www.jackfilter.at/de/produkte/adsorptionsfilter/aktivkohle-granulat Jack Filter Lufttechnik GmbH] kleineres Material, in der Industriestraße B Objekt 5, 2345 Brunn am Gebirge (Abzuklären)<br />
* [http://www.aqualine-terraline.com/cms/front_content.php?idart=91&lang=1 AQUALINE-TERRALINE] 90s style website, in der Ufergasse 8, 2540 Bad Vöslau (Abzuklären)<br />
<br />
=== Anleitungen Epilog 36EXT ===<br />
* [[Media:Lazzzor Settings Metalab.pdf| Lazzzor Settings PDF]]<br />
* [[Media:Epilog36ExtManual.pdf|Epilog 36EXT User Manual]]<br />
* [[Media:EpilogServiceManual.pdf|Epilog International Service Manual]]<br />
* [[Media:Epilog36EXTAlignMirrors.pdf|Epilogs Tips How to align Mirrors/Laser]]<br />
<br />
=== Drivers ===<br />
<br />
* [http://www.epiloglaser.com/downloads_ext.htm Epilog drivers]<br />
* [[Ctrl-Cut]] - teh future, it haz teh brightness<br />
<br />
==Cheats==<br />
* Focus:<br />
** Press Stop and then Focus on the machine: '''Focus on the homeposition''', rather then 50 mm diagonally shifted from home..<br />
** XY-Off, Go: Free moving mode. OK thats not a cheat. NOW: keyboard '''cursor up/down moves the table up down'''. Cool! Also works after pressing "focus", without "go" afterwards..<br />
** Autofocus happens at the first cut/engrave position of the file.<br />
* Engrave:<br />
** "bottom up" is sometimes better, depends on the direction of the fumes. Fumes should move away from the deep parts.<br />
** Stucki Rastering is nice.. Brighten=different gamma<br />
** panel 3d mode: Not the position of the laser pulses is rastered, but instead the laser-power changes by the gray level. So the laser seems to be constantly on. Needs more Laserpower than in the tables (+30%?).<br />
** Engrave speed and Power can be changed while the job is lazzoring. Not possible for vector! Press spee/powerd, and cursor up or down, go to apply<br />
** Plastic: Engrave whith cover foil removed. <br />
** Plastic: engrave 1.5 mm out of focus=smoother surfaces.<br />
** Plastic: second pass with low power settings: removes dirt from the depths.<br />
** Plastic: can be wetted for less melting..<br />
** Anodizes Aluminium: LOW POWER, High Speed, maybe multiple passes are recommended in the manual.<br />
** Glas: Coat Area with dish soap. Afterwards, polish with scotchbrite<br />
** Delrin: super for 3d engrave<br />
** Colorized Depths: Apply Wax to the top,engrave, color, sand top.<br />
<br />
* Homeing:<br />
** Center Engrave option in the driver-panel: where home is, e.g. move home from left top to center point, so you can engrave text on the center of a circle...<br />
* General<br />
** Multiple passes=print tab->number of copies...<br />
** The rulers can be flipped to take out the hexahedral baseplate.<br />
<br />
* Compressor ("Air assist") does not work / flames / paper and wood start burning:<br />
** Check air assist by cutting a long line slowly with open cover, and feel for airflow.<br />
** If no airflow present, set the line color to red, enable color mapping in the laser settings, switch air assist off for red, run the program. Repeat with air assist switched on. This should now be the default setting again -- feel for air flow to be sure.<br />
<br />
* [[Laser/Experiments|Laser experiments]]<br />
<br />
[[Kategorie:Maschinen]]<br />
[[Kategorie:Lazzzor]]<br />
[[Kategorie:WhateverLab]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=Laser/Experiments&diff=67045
Laser/Experiments
2019-03-12T20:20:44Z
<p>Chrysn: tests for the metalab lazzzor mouzzze pad</p>
<hr />
<div>== about ==<br />
This section explores different possibilities of parameters and their outcome.<br />
This is a good place to get you an idea on how to fine tune your parameters.<br />
<br />
Material:<br />
<br />
* The material<br />
** different parameters 1<br />
** different parameters 2<br />
** different parameters 3<br />
<br />
* Soap<br />
** engraving a soap ended in the soap swelling, or so I’ve heard.<br />
<br />
* Leather<br />
** Got a 1,5mm raw dark-brown leather, cutting goes incredibly well, but on one side it goes better then on the other. Speed: 45 or 40, Power: 100, Freq.: 2500<br />
** Engraving is not soo good, you can see the engraved parts, but only on 100/100, and then its not even black or something... May this depends on your leather<br />
<br />
* Thin felt ([http://www.creativehobbiesgroup.com/product/8436460 knorrprandel Bogen 1mm])<br />
** Speed 100%<br />
** Power 10%<br />
** Pulse frequency 2500Hz<br />
* Less thin felt (de: Filz), about 3mm<br />
** Cutting: Speed 90%, Power 20%<br />
** Engraving: more experiments to be done, but note: large black areas will melt the material deeply, thin lines will result in very betauful printing on the material (I used red felt, engraving on dark/brown/black felt might not make much sense)<br />
<br />
* Jeans / Denim<br />
** engraving: 60% speed, 60% power.<br />
** engraving of denim glued onto wood: 60% speed, 100% power gets almost through the cloth and makes the wood partially visible.<br />
** cutting of denim glued onto wood: just cut a bit slower than through the wood alone (e.g. 15% speed instead of 20% speed)<br />
<br />
== ideas ==<br />
* making a example raster / vector file for experimental cuts<br />
** using color mapping for different speed/power/frequency in one job..<br />
<br />
<br />
== settings for circuit boards ==<br />
* montana black 312g net/11 oz. blue spray paint use speed 50%, power 100% and 5000hz<br />
<br />
[[Kategorie:English]]<br />
[[Kategorie:Lazzzor]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=Laser/2019-03-08&diff=67044
Laser/2019-03-08
2019-03-12T19:55:29Z
<p>Chrysn: durchgeführte Wartungsarbeiten</p>
<hr />
<div>== Ereignisse und Wartungen am Lasercutter 2019-03-08 bis 2019-03-12 ==<br />
<br />
=== 2019-03-08 ===<br />
<br />
Beim Schneiden blieb der Autofokustasktopf an einem Gewicht hängen, wobei dessen innere Feder ausgezerrt wurde; über die Innensechskantschraube am Tastkopf wurden Feder und die beiden unteren Teile (halbkugel- und zylinderförmig) bis auf Weiteres demontiert.<br />
<br />
Was von der Feder noch gemessen werden konnte waren folgende [http://www.salomon-online.at/shop/index.php?cid=126 Parameter]:<br />
<br />
* d = 0.3mm<br />
* De = 3.1mm <br />
* Lo - Lk = 5mm <br />
* ca. 19 Windungen <br />
<br />
Weiters wirkte der Laser schwach und wurde im Lauf des Abends deutlich schwächer (10% speed, 100% power, 500Hz für 4mm Sperrholz am Anfang des Abends, zwei passes 7%/100%/500Hz am Ende).<br />
<br />
<br />
=== 2019-03-10 ===<br />
<br />
Feder probehalber durch eine im Lab vorhandene und zurechtgekürzte ersetzt (d = 0.7mm, De = 3.7mm, Lo = 13.7mm); diese resultierte in einem deutlich zu steifen Taster.<br />
<br />
Im Zuge dessen wurde festgestellt, dass der Air Assist gelockert war. Nach grobem Einstellen und Festziehen der Montageschraube über dem Air Assist war die Laserleistung wieder voll da (20% speed durch 4mm Sperrholz).<br />
<br />
=== 2019-03-12 ===<br />
<br />
Feder ersetzt durch eine von CS zur Verfügung gestellte mit d = 0.29mm, De = 2.99mm und 28 Windungen. Die Feder konnte ohne Veränderungen eingebaut werden.<br />
<br />
Autofokus wurde getestet und funktioniert wieder.</div>
Chrysn
https://metalab.at/wiki/index.php?title=Archiv:Laser/How_to_maintain_Lazzzor&diff=67043
Archiv:Laser/How to maintain Lazzzor
2019-03-12T19:20:20Z
<p>Chrysn: Link zum aktuellen Laserwartungsprotokoll</p>
<hr />
<div>== wtf ==<br />
Willst du was Gutes tun? Dann bist du hier genau richtig. Hier findest du diverse Prozesse, gut dokumentiert, was es alles zu tun gibt damit wir alle länger was von diesem tollen Gerät haben.<br />
<br />
'''Bitte im Excel-Sheet am Laser-PC selbst dokumentieren was/wann getan wurde!'''<br />
<br />
== protip ==<br />
<br />
Am besten benutzte Schwämme/Tücher nach der Wartung entsorgen. Atemschutzmasken sehr empfehlenswert. Handschuhe auch.<br />
<br />
'''Falls du noch nie was aufgeschraubt hast und du dir unsicher bist, gib lieber auf der Mailingliste bescheid ob dir nicht vielleicht jemand helfen will.'''<br />
<br />
Das hier wird bestimmt auch von Vorteil sein:<br />
* [[Media:Epilog36ExtManual.pdf|Epilog 36EXT User Manual]]<br />
* [[Media:EpilogServiceManual.pdf|Epilog International Service Manual]]<br />
* [[Media:Epilog36EXTAlignMirrors.pdf|Epilogs Tips How to align Mirrors/Laser]]<br />
<br />
== Die wichtigsten Arbeiten im Überblick==<br />
<br />
{| border="1" cellpadding="4"<br />
! aufgabe<br />
! wie oft <br />
|-<br />
| Fokuslinse+Autofocus reinigen || align="center" | bei Bedarf* (jedes min. Quartal) <br />
|-<br />
| Filter tauschen || align="center" | bei Bedarf: wenn licht rot leuchtet <br />
|-<br />
| Griller/Arbeitsfläche || align="center" | halbjährlich <br />
|-<br />
| komplett Entstaubung || align="center" | halbjährlich <br />
|-<br />
| Abluftschacht || align="center" | halbjährlich <br />
|-<br />
| Mechanik schmieren || align="center" | jährlich<br />
|-<br />
| Spiegel justieren || align="center" | nach Komplettentstaubung / Abluftschacht / bewegen des Lasers<br />
|}<br />
<br />
=== Fokuslinse+Autofocus reinigen ===<br />
wann?<br />
* Je nach Lazzzorbenutzung, häufig.<br />
<br />
was tun?<br />
* Fokuslinsehalterung abschrauben<br />
* mit Isopropanol reinigen<br />
<br />
<gallery><br />
</gallery><br />
<br />
=== Filter tauschen ===<br />
wann?<br />
* wenn das rote Licht am Fuße des Filters bedrohlich leuchtet. Je nach Lazzzorbenutzung.<br />
<br />
was tun?<br />
* blabla<br />
* bla<br />
* ...<br />
<br />
<gallery><br />
</gallery><br />
<br />
=== Griller/Arbeitsfläche putzen ===<br />
was tun?<br />
* Handschuhe sind wärmstens zu empfehlen.<br />
* Griller rausnehmen und in einem Bad + fettlösendes Spülmittel (passende wanne baut overflo?) einweichen lassen.<br />
* Griller-Schienen ebenfalls einweichen<br />
* Arbeitsfläche unter dem Griller staubsaugen und hinterher feucht auswischen.<br />
<br />
<gallery><br />
</gallery><br />
<br />
=== Abluftschacht ===<br />
was tun?<br />
* im Innenraum an der hinteren Wand den schmalen Abluftschacht mit einer Klobürste vorsichtig den Dreck richtung Ausgangsschacht schieben<br />
* Abluftschlauch abnehmen und beide Teile mit Staubsauger/feuchtem Tuch bearbeiten.<br />
* Abluftschlauch wieder mit genügend Gaffa befestigen.<br />
<br />
<gallery><br />
</gallery><br />
<br />
=== Komplett-Entstaubung ===<br />
was tun?<br />
* Alles abschrauben<br />
* Arbeitsfläche hochfahren<br />
* alle freien flächen mit dem Kompressor bearbeiten<br />
* wo nötig, noch feucht nachwischen.<br />
<br />
<gallery><br />
</gallery><br />
<br />
=== Mechanik schmieren ===<br />
was tun?<br />
* abschrauben von diversen Gehäuseteilen. Wenn man das Frontteil und den X-Achengehäuse abmontiert, sollten alle Stellen erreichbar sein.<br />
* Insgesamt gibt es 7 Stellen zu schmieren<br />
* X-Achse<br />
* Y-Achse, links & rechts -> 2x<br />
* 2x Hebemechanik, links & rechts -> 4x<br />
<br />
<gallery><br />
</gallery><br />
<br />
=== Spiegel justieren===<br />
was tun?<br />
* [[Media:Epilog36EXTAlignMirrors.pdf|Epilogs Tips How to align Mirrors/Laserl]]<br />
siehe auch für bessere Visualisierung in manchen Teilen<br />
* [[Media:EpilogServiceManual.pdf|Epilog International Service Manual]]<br />
<br />
<gallery><br />
</gallery><br />
<br />
== Wartungsprotokolle ==<br />
<br />
(von Tagen, an denen's für das Excel-Sheet am PC zu lange / ausführlich wird)<br />
<br />
* [[Laser/2019-03-08]]<br />
<br />
[[Kategorie:Howto]]<br />
[[Kategorie:Hausmeistern]]<br />
[[Kategorie:Lazzzor]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=Keymember_Workshop&diff=66466
Keymember Workshop
2018-12-12T17:46:06Z
<p>Chrysn: /* 16.12.2018 16:16 */ i'll be there</p>
<hr />
<div>The Keymember Workshop is the Training event for Metalab Keymembers. It happens 2-4 times a year. It would be nice if any Keymember attends at least once per year. <br />
<br />
We will train: <br />
* die Position und Art der Feuerlöscher <br />
* die Position und Inhalt der Verbandskästen <br />
* Verhalten in Notsituationen <br />
* Verhalten bei Beschwerden <br />
* Position und Anzahl notwendiger Fenster <br />
* Bedienung der Heizung <br />
* Position der Mülleimer <br />
* Position des Kellers <br />
* Leerung der Kassa <br />
* Verhalten bei Führungen <br />
* Shutdown <br />
* Verhalten bei Massenpaniken verursacht durch Mateknappheit <br />
* Issuetracker<br />
<br />
Vorschläge zusätzlicher Themen:<br />
* Einweisung von lab-neuen Personen im Umgang mit dem Space, Equipment, Mishaps, etc. und Hinweis auf Wikiguides<br />
* Absolut zu vermeidendes no-go Verhalten (Diskriminierung, Sexismus, etc.).<br />
* Aufsichtsverantwortung der Keymember über den Space klarstellen und wie man bei Verstößen obig genannter Punkte vorgeht.<br />
* Ans Labtelefon rangehen (und wie man es richtig macht - no kidding)<br />
* Wie öffnet man die Türe des Labs bei Stromausfall (von innen).<br />
* Korrekte Verwendung von Feuerlöschern<br />
* Übersicht über die Kommunikationsstrukturen des Labs: Mailinglisten, Jabber, Core, Issuetracker, Einkaufsliste, IRC, Anlaufstelle, ... (Whiteboards, Soups, Twitter, Telegram, Facebookgruppe)<br />
<br />
=Dates=<br />
<br />
== 26.11.2018 19:00 ==<br />
===Speakers===<br />
* [[Benutzer:prikle]]<br />
===Participants===<br />
* [[zoff]]<br />
* [[Benutzer:naxx]]<br />
* [[Benutzer:Yourname]]<br />
* vt100<br />
* [[Benutzer:Phantasus|Phantasus]]<br />
* [[Benutzer:Legba7|Legba7]]<br />
* [[Benutzer:nomike|nomike]]<br />
* [[User:Amir|amir]]<br />
<br />
== 12.12.2018 12:12 ==<br />
(die Zeiten sind so gewählt, damit auch Mitglieder, die Abends keine Zeit haben, teilnehmen können)<br />
===Speakers===<br />
* [[Benutzer:Who?]]<br />
===Participants===<br />
* [[Benutzer:albert]]<br />
* [[Benutzer:Spfeifer]]<br />
* [[Benutzer:Metachris]]<br />
* [[Benutzer:Yourname]]<br />
<br />
== 16.12.2018 16:16 ==<br />
(die Zeiten sind so gewählt, damit auch Mitglieder, die Abends keine Zeit haben, teilnehmen können)<br />
===Speakers===<br />
* [[Benutzer:Who?]]<br />
===Participants===<br />
* [[Benutzer:AndiS]]<br />
* [[Benutzer:Eisbaer]]<br />
* [[Benutzer:reox]]<br />
* [[Benutzer:chrysn]]<br />
* [[Benutzer:YOU?]]<br />
<br />
= vergangene Treffen =<br />
<br />
==2016-02-24 19:30 ==<br />
===Speakers===<br />
* [[Benutzer:Zem|Zem]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=Initiative_f%C3%BCr_Netzfreiheit&diff=62615
Initiative für Netzfreiheit
2017-01-25T12:08:57Z
<p>Chrysn: broken link repariert auf naechstbestes ergebnis</p>
<hr />
<div>{{Usergroup<br />
|logo=Netzfreiheit-Logo.svg<br />
|organizer=[[User:redplanet|redplanet]]<br />
|homepage= [https://netzfreiheit.org netzfreiheit.org]<br />
|topic=Netzpolitik, Netzneutralität, Datenshcutz, ...<br />
|startdate=08.01.2012<br />
|status=active<br />
|meetings=on demand<br />
|targetgroup=Vertraute und Interessierte<br />
|description=Die Initiative für Netzfreiheit setzt sich für BürgerInnenrechte im digitalen Kontext ein. <br />
}}<br />
<br />
== Initiative für Netzfreiheit ==<br />
<br />
Die Initiative für Netzfreiheit setzt sich für BürgerInnenrechte im digitalen Kontext ein. Unser Anliegen ist es, Netzpolitik in den Fokus der Politik und der Allgemeinheit zu rücken und mittels Vorträgen und persönlicher Gespräche eine gemeinsame Wissensbasis zu schaffen.<br />
<br />
=== Gründung ===<br />
<br />
Am 8. Jänner 2012 gründete sich der Verein in den Räumlichkeiten des Metalabs.<br />
<br />
=== Mitmachen ===<br />
<br />
Wie du dich im Verein einbringen kannst erfährst du [https://netzfreiheit.org/verein/ auf der Vereinswebsite].<br />
<br />
=== Meetups ===<br />
<br />
Wir treffen uns gelegentlich im [[Info Folder|Metalab]] um uns über neuigkeiten auszutauschen, Aktionen zu planen etc. Treffen werden im [https://metalab.at/calendar/ Kalender] bekannt gegeben.<br><br />
Neue Gesichter sind jederzeit herzlichst willkommen!<br />
<br />
Ort: '''Metalab [[Bibliothek]]''' und auf mumble.netzfreiheit.org<br />
<br />
=== Socializing ===<br />
<br />
Ab und zu machen wir auch einfach Treffen um uns besser kenne zu lernen und InteressentInnen die Möglichkeit zu geben im Rahmen des Vereins mitzuwirken.<br />
<br />
<br />
=== Schwerpunkte ===<br />
<br />
* Netzneutralität - https://unsernetz.at<br />
* Urheberrecht<br />
* Datenschutz - https://wirwollendatenschutz.at<br />
* Vorratsdatenspeicherung - via akvorrat http://akvorrat.at<br />
* NSA<br />
* Europawahlen<br />
<br />
=== Webseite ===<br />
<br />
[https://netzfreiheit.org Webseite der Initiative für Netzfreiheit]<br />
<br />
<br />
=== Fragen? ===<br />
<br />
Schreibe an: ''info [ät] netzfreiheit.org''!<br />
<br />
[[Kategorie:Usergroups]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=OldLaser&diff=60053
OldLaser
2016-05-21T18:21:47Z
<p>Chrysn: /* Cheats */ handling missing air assist</p>
<hr />
<div>{{Maschinenring}}<br />
{{Head_de}}<br />
{{Machine<br />
|image=Lasercutter.jpg<br />
|owner=Metalab<br />
|status=Aktiv<br />
|requirestraining=Ja<br />
|requiresauth=[[Lazzzorauth|Ja]]<br />
|cost=pro Minute: 1,50€ für Nicht-Mitglieder, 1€ für Mitglieder<br />
|teachers={{Lasermenschen}}<br />
}}<br />
__TOC__<br />
[[Bild:Lazzzor3943745582 d75e2e9525 o.jpg|thumb|240px|right|Der Lasercutter beim Schneiden von Acryl]]<br />
{|<br />
| Die Soup zum Lazzzor → '''[http://lazzzor.soup.io lazzzor.soup.io]'''<br />
|[[Bild:Soup badge.png|16px]]<br />
|}<br />
<br />
Wir haben einen [http://www.epiloglaser.com/legend_36ext.htm Epilog Legend 36EXT] Lasercutter (60 W-Version).<br />
<br />
Generell kann man damit aus einer Vielzahl von Materialien (Holz, viele Kunststoffe, Papier, etc.) beliebige 2D-Formen ausschneiden. Metalle können nur graviert aber nicht geschnitten werden. Der LASER ist auf einen extrem kleinen Punkt fokussiert. Der Schnitt ist dünner als ein Zehntel mm. Was man damit machen kann sieht man z.B. in unserem '''[http://lazzzor.soup.io/ Lazzzor Blog]''' oder bei [http://brepettis.com/blog/category/lazzzor/ Bre Pettis]<br />
<br />
== Willst du etwas lasern?==<br />
[[Laser/Lasern_für_Nicht-Mitglieder|Information zum Lasern für Nicht-Mitglieder]]<br />
<br />
Wenn man etwas mit dem Laser schneiden oder gravieren will dann wendet man sich an [[Datei:core.png]] (''vor allem für dringende Anfragen'') oder besser direkt an einen Lazzzor-Verantwortlichen; Das sind bisher: <br />
{{Lasermenschen}}<br />
<br />
Ausserdem: Die nutzbare Arbeitsfläche ist '''890mmx590mm''' (max. 914x609mm nur mit Vorsicht)<br />
<br />
: <div style="background-color:white; padding:30px 10px;"> Für mehr Informationen was vorzubereiten ist, siehe den [[Laser/How_to_Lazzzor|How to Lazzzor Guide]].</div><br />
<br />
Wenn du '''Lazzzor-Verantwortliche/r''' werden willst musst du das [[Laser Cutter Workshop]] besuchen und die '''Lazzzor-Prüfung''' bestehen.<br />
<br />
== Kosten ==<br />
Für die reine Laserzeit fallen folgende Kosten an:<br />
* 1,00 € pro Minute für Metalab-Mitglieder<br />
* 1,50 € pro Minute für Nichtmitglieder <br />
: <div style="background-color:white; padding:10px;">'''Bitte beachten:''' Der Aufwand für allf. notwendige Aufbereitungshilfe der Dateien und die Zeit des/der Laserbeauftragten ist in diesem Preis '''nicht inkludiert''' und sollte '''vor der Arbeit''' vereinbart werden. Wenn Du einen hilfsbereite Aufsichtsperson gefunden hast, so sprich sie darauf selbständig an. Bedenke, es gibt keine Angestellten und keine Garantien. Das Metalab ist ein Verein der seinen Mitgliedern im Rahmen seiner Zielsetzung mit Infrastruktur versorgen will. Er ist '''nicht als Dienstleister zu verstehen'''.</div><br />
<br />
Wenn die Initialkosten abbezahlt sind wird der Preis für Metalab-Mitglieder auf die Wartungskosten für den Laser reduziert.<br />
<br />
=== Kassaleerung ===<br />
<br />
Falls die Lazzzor Kassa voll sein sollte, melde dies bitte einem der Lazzzor - Verantwortlichen oder an [[Datei:Core.png]]<br />
<br />
== Was kann man schneiden? ==<br />
* '''Papier/Karton'''<br />
* '''Acryl'''<br />
* '''Holz'''<br />
* '''Moosgummi'''<br />
* '''Filz'''<br />
* grundsätzlich alles, was explizit für Lasercutten vermarktet wird<br />
Zu schneidende Platten sollten nicht dicker als 8-10mm sein (ist abhängig vom Material). Je dicker desto ungenauer wird der Schnitt auch.<br />
<br />
== Was kann man gravieren? ==<br />
* '''Glas''' (inkl. Spiegel)<br />
* '''anodisiertes Aluminium'''<br />
<br />
== Was kann man NICHT schneiden? ==<br />
* '''Metalle''' (auch keine sehr dünnen.)<br />
* '''Polystyrol''' ("Hobbyglas"), giftige gase und unvorteilhaftes brandverhalten [https://de.wikipedia.org/wiki/Polystyrol#Brandverhalten *]<br />
* '''Polyvinylchlorid (PVC)''', denn beim Schneiden dieser Kunststoffe entstehen giftige Gase!<br />
* '''Polycarbonat (PC)''', Polycarbonat ist mit Hitze nicht gut schneidbar, die Kanten verkleben und stinken. <br />
* '''MDF''' (denn der Kleber im MDF verdreckt die Optik extrem schnell)<br />
* https://web.archive.org/web/20100716083933/http://entropie.digital.udk-berlin.de/wiki/Laser_Cutter#What_NOT_to_do_with_a_laser_cutter<br />
* '''Carbonfaserplatten'''. Laserstrahl wird an den Fasern zerstreut, dringt nicht ins Material ein, und heizt bis zum Delaminieren.<br />
<br />
== Was kann man machen / ist möglich? ==<br />
<gallery><br />
Bild:3026073905 cd9c202ce7.jpg<br />
Bild:2949655546 d68f1345d0.jpg<br />
Bild:3049266118 782be12f8e.jpg<br />
Bild:3033540368 a5bea99ae6.jpg<br />
</gallery><br />
* http://www.thingiverse.com/ - ganz tolle sammlung von creativecommons/opensource modellen zum runterladen und selberlasern/reprappen.<br />
* http://www.engraveyourtech.com/ - eine firma die da professionell macht, nette ideen im blog.<br />
* http://www.lasercuttingshapes.com/page/materials<br />
<br />
== Bezugsquellen ==<br />
<p><br />
<br />
{| style="float:right;"<br />
|-<br />
| [[Datei:Sortiment1.jpg|200px|thumb|Materialsamples von plexiglas-shop.com]]||[[Datei:Sortiment2.jpg|200px|thumb|Materialsamples von plexiglas-shop.com]]<br />
|}<br />
<br />
=== Plexi / Acryl / Other ===<br />
* http://shop.transparentdesign.at/ Versand ab 20€ kostenlos, online Formular mit direkter Peiskalkulation<br />
* http://www.acrylstudio.at/<br />
* http://www.graviermaterial.at/ (ab 1m² pro Stärke)<br />
* http://wettlinger.at/<br />
* http://www.plexiglas-shop.com/AT/<br />
* http://hbholzmaus.eshop.t-online.de/ unglaublich günstiges acryl und PETG! <br />
</p><br />
<br />
=== Holz ===<br />
* http://www.fabianholz.at - 6mm Sperrholz Pappel eignet sich gut<br />
* Hornbach in Wien (gute Preise)<br />
<br />
== Wartung Laser und Filter ==<br />
: <div style="background-color:white; padding:10px;">'''Funktioniert der Laser nicht wie er soll? Motiviert dir die Hände schmutzig zu machen?<br />[[Lazzzor/How_to_maintain_Lazzzor|Hier gibts mehr Infos zur Wartung]]'''</div><br />
<br />
=== Filteranlage Kappa LN 230-ZA ===<br />
<br />
* [[Media:KappaLN220-230.pdf|Betriebs- und Wartungsanleitung LN 220-230]]<br />
* [[Media:KappaLN220-230Ersatzteilliste.pdf|Ersatzteilliste Filter]]<br />
<br />
'''Nachbestellungen:'''<br />
Kappa Arbeitsschutz & Umwelttechnik GmbH http://www.kappa.at<br />
Kontakt: Marlovits Sandra s.marlovits@kappa.at<br />
<br />
=== Anleitungen Epilog 36EXT ===<br />
* [[Media:Lazzzor Settings Metalab.pdf| Lazzzor Settings PDF]]<br />
* [[Media:Epilog36ExtManual.pdf|Epilog 36EXT User Manual]]<br />
* [[Media:EpilogServiceManual.pdf|Epilog International Service Manual]]<br />
* [[Media:Epilog36EXTAlignMirrors.pdf|Epilogs Tips How to align Mirrors/Laser]]<br />
<br />
=== Drivers ===<br />
<br />
* [http://www.epiloglaser.com/downloads_ext.htm Epilog drivers]<br />
* [[Ctrl-Cut]] - teh future, it haz teh brightness<br />
<br />
==Cheats==<br />
* Focus:<br />
** Press Stop and then Focus on the machine: '''Focus on the homeposition''', rather then 50 mm diagonally shifted from home..<br />
** XY-Off, Go: Free moving mode. OK thats not a cheat. NOW: keyboard '''cursor up/down moves the table up down'''. Cool! Also works after pressing "focus", without "go" afterwards..<br />
** Autofocus happens at the first cut/engrave position of the file.<br />
* Engrave:<br />
** "bottom up" is sometimes better, depends on the direction of the fumes. Fumes should move away from the deep parts.<br />
** Stucki Rastering is nice.. Brighten=different gamma<br />
** panel 3d mode: Not the position of the laser pulses is rastered, but instead the laser-power changes by the gray level. So the laser seems to be constantly on. Needs more Laserpower than in the tables (+30%?).<br />
** Engrave speed and Power can be changed while the job is lazzoring. Not possible for vector! Press spee/powerd, and cursor up or down, go to apply<br />
** Plastic: Engrave whith cover foil removed. <br />
** Plastic: engrave 1.5 mm out of focus=smoother surfaces.<br />
** Plastic: second pass with low power settings: removes dirt from the depths.<br />
** Plastic: can be wetted for less melting..<br />
** Anodizes Aluminium: LOW POWER, High Speed, maybe multiple passes are recommended in the manual.<br />
** Glas: Coat Area with dish soap. Afterwards, polish with scotchbrite<br />
** Delrin: super for 3d engrave<br />
** Colorized Depths: Apply Wax to the top,engrave, color, sand top.<br />
<br />
* Homeing:<br />
** Center Engrave option in the driver-panel: where home is, e.g. move home from left top to center point, so you can engrave text on the center of a circle...<br />
* General<br />
** Multiple passes=print tab->number of copies...<br />
** The rulers can be flipped to take out the hexahedral baseplate.<br />
<br />
* Compressor ("Air assist") does not work / flames / paper and wood start burning:<br />
** Check air assist by cutting a long line slowly with open cover, and feel for airflow.<br />
** If no airflow present, set the line color to red, enable color mapping in the laser settings, switch air assist off for red, run the program. Repeat with air assist switched on. This should now be the default setting again -- feel for air flow to be sure.<br />
<br />
* [[Laser/Experiments|Laser experiments]]<br />
<br />
[[Kategorie:Maschinen]]<br />
[[Kategorie:Lazzzor]]<br />
[[Kategorie:WhateverLab]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=Keymember_Workshop&diff=59080
Keymember Workshop
2016-02-24T09:44:08Z
<p>Chrysn: /* Participants */ i'm in</p>
<hr />
<div>The Keymember Workshop is the Training event for Metalab Keymembers. It happens 2-4 times a year. It would be nice if any Keymember attends at least once per year. <br />
<br />
We will train: <br />
* die Position und Art der Feuerlöscher <br />
* die Position und Inhalt der Verbandskästen <br />
* Verhalten in Notsituationen <br />
* Verhalten bei Beschwerden <br />
* Position und Anzahl notwendiger Fenster <br />
* Bedienung der Heizung <br />
* Position der Mülleimer <br />
* Position des Kellers <br />
* Leerung der Kassa <br />
* Verhalten bei Führungen <br />
* Shutdown <br />
* Verhalten bei Massenpaniken verursacht durch Mateknappheit <br />
* Issuetracker<br />
<br />
Vorschläge zusätzlicher Themen:<br />
* Einweisung von labneuen Personen im Umgang mit dem Space, Equipment, Mishaps, etc. und Hinweis auf Wikiguides<br />
* Absolut zu vermeidentes no-go Verhalten (Diskriminierung, Sexismus, etc.).<br />
* Aufsichtsverantwortung der Keymember über den Space klarstellen und wie man bei Verstößen obig genannter Punkte vorgeht.<br />
* Ans Labtelefon rangehen (und wie man es richtig macht - no kidding)<br />
* Wie öffnet man die Türe des Labs bei Stromausfall (von innen).<br />
* Korrekte Verwendung von Feuerlöschern<br />
* Übersicht über die Kommunikationsstrukturen des Labs: Mailinglisten, Jabber, Core, Issuetracker, Einkaufsliste, IRC, Anlaufstelle, ... (Whiteboards, Soups, Twitter, Telegram, Facebookgruppe)<br />
<br />
=Dates=<br />
<br />
==2016-02-24 19:30 ==<br />
<br />
===Speakers===<br />
* [[Benutzer:Zem|Zem]]<br />
<br />
===Participants===<br />
* [[Benutzer:uniq|uniq]]<br />
* [[Benutzer:VT100|VT100]]<br />
* [[Benutzer:amir|amir]]<br />
* [[Benutzer:Sonstwer|Sonstwer]]<br />
* [[Benutzer:Ryn|armin]]<br />
* [[Benutzer:reox|reox]]<br />
* [[Benutzer:nioram|nioram]]<br />
* [[Benutzer:herbert|Herbert]]<br />
* [[Benutzer:lydschi|lydschi]]<br />
* [[Benutzer:Juli|Juli]]<br />
* [[Benutzer:vandefun|vandefun]]<br />
* [[Benutzer:datacop|datacop]]<br />
* [[Benutzer:redplanet|redplanet]]<br />
* [[Benutzer:sja|sja]]<br />
* [[Benutzer:chrysn|chrysn]]<br />
* [[Benutzer:you|you]]?<br />
<br />
==2016-Summer==<br />
===Speakers===<br />
* [[Benutzer:Who?]]<br />
<br />
===Participants===<br />
* [[Benutzer:Yourname]]<br />
<br />
<br />
==2016-Autumn==<br />
===Speakers===<br />
* [[Benutzer:Who?]]<br />
<br />
===Participants===<br />
* [[Benutzer:Yourname]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=TU_Wien_Cleanroom_Tour&diff=58220
TU Wien Cleanroom Tour
2016-01-19T16:59:31Z
<p>Chrysn: /* Who? */ count me in</p>
<hr />
<div>=== What? ===<br />
<br />
A tour of the cleanroom and associated laboratories of the Technische Universität Wien. Come and see the advanced equipment used for semiconductor materials and devices research here in Vienna. I can answer questions about most of the equipment and techniques. A basic demo or two might be possible if time allows. Tours will be in english. <br />
<br />
=== Where? ===<br />
<br />
Floragasse 7, 1040 Wien.<br />
U1 stop Taubstummengasse.<br />
Bim stop Mayerhofgasse or Paulanergasse. <br />
<br />
=== When? ===<br />
<br />
To be determined.<br />
Weekend only.<br />
<br />
=== How much? ===<br />
<br />
Free<br />
<br />
=== Who? ===<br />
<br />
The following people want to go: <br />
(Please add a very short statement if you have a particular area of related interest)<br />
# [[User:Moritz|moritz]]<br />
# [[User:Pk|pk]]<br />
# [[User:metaz|meta]]<br />
# [[User:ripper|ripper]]<br />
# [[User:zwax|Zwax]]<br />
# [[User:ente|ente]]<br />
# [[User:reox|reox]]<br />
# [[User:Lumbric|lumbric]]<br />
# [[User:Hetti|Hetti]]<br />
# Armin<br />
# Paul<br />
# Paul Guest <br />
# [[User:Kristof|Kristof]]<br />
# [[User:Atrox|Atrox]]<br />
# [[user:chrysn|chrysn]]<br />
#<br />
<br />
Maximum 16 people total. You will be split into smaller groups of 3-4 each.<br />
<br />
=== Contact ===<br />
<br />
* [[User:Don|don]]<br />
* To contact me please use Jabber.<br />
<br />
[[Kategorie:Veranstaltungen]]<br />
[[Kategorie:Extern]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=OldLaser&diff=57669
OldLaser
2015-11-06T06:04:25Z
<p>Chrysn: /* Plexi / Acryl / Other */ mindestbestellmenge aus anfrageantwortmail eingetragen, doppelten eintrag (praktisch gleiche seite) entfernt</p>
<hr />
<div>{{Maschinenring}}<br />
{{Head_de}}<br />
{{Machine<br />
|image=Lasercutter.jpg<br />
|owner=Metalab<br />
|status=Aktiv<br />
|requirestraining=Ja<br />
|requiresauth=[[Lazzzorauth|Ja]]<br />
|cost=pro Minute: 1,50€ für Nicht-Mitglieder, 1€ für Mitglieder<br />
|teachers={{Lasermenschen}}<br />
}}<br />
__TOC__<br />
[[Bild:Lazzzor3943745582 d75e2e9525 o.jpg|thumb|240px|right|Der Lasercutter beim Schneiden von Acryl]]<br />
{|<br />
| Die Soup zum Lazzzor → '''[http://lazzzor.soup.io lazzzor.soup.io]'''<br />
|[[Bild:Soup badge.png|16px]]<br />
|}<br />
<br />
Wir haben einen [http://www.epiloglaser.com/legend_36ext.htm Epilog Legend 36EXT] Lasercutter (60 W-Version).<br />
<br />
Generell kann man damit aus einer Vielzahl von Materialien (Holz, viele Kunststoffe, Papier, etc.) beliebige 2D-Formen ausschneiden. Metalle können nur graviert aber nicht geschnitten werden. Der LASER ist auf einen extrem kleinen Punkt fokussiert. Der Schnitt ist dünner als ein Zehntel mm. Was man damit machen kann sieht man z.B. in unserem '''[http://lazzzor.soup.io/ Lazzzor Blog]''' oder bei [http://brepettis.com/blog/category/lazzzor/ Bre Pettis]<br />
<br />
== Willst du etwas lasern?==<br />
Wenn man etwas mit dem Laser schneiden oder gravieren will dann wendet man sich an [[Datei:core.png]] (''vor allem für dringende Anfragen'') oder besser direkt an einen Lazzzor-Verantwortlichen; Das sind bisher: <br />
{{Lasermenschen}}<br />
<br />
Ausserdem: Die nutzbare Arbeitsfläche ist '''890mmx590mm''' (max. 914x609mm nur mit Vorsicht)<br />
<br />
: <div style="background-color:white; padding:30px 10px;"> Für mehr Informationen was vorzubereiten ist, siehe den [[Laser/How_to_Lazzzor|How to Lazzzor Guide]].</div><br />
<br />
Wenn du '''Lazzzor-Verantwortlicher''' werden willst musst du das [[Laser Cutter Workshop]] besuchen und die '''Lazzzor-Pruefung''' bestehen.<br />
<br />
== Kosten ==<br />
Für die reine Laserzeit fallen folgende Kosten an:<br />
* 1,00 € pro Minute für Metalab-Mitglieder<br />
* 1,50 € pro Minute für Nichtmitglieder <br />
: <div style="background-color:white; padding:10px;">'''Bitte beachten:''' Der Aufwand für allf. notwendige Aufbereitungshilfe der Dateien und die Zeit des/der Laserbeauftragten ist in diesem Preis '''nicht inkludiert''' und sollte '''vor der Arbeit''' vereinbart werden. Wenn Du einen hilfsbereite Aufsichtsperson gefunden hast, so sprich sie darauf selbständig an. Bedenke, es gibt keine Angestellten und keine Garantien. Das Metalab ist ein Verein der seinen Mitgliedern im Rahmen seiner Zielsetzung mit Infrastruktur versorgen will. Er ist '''nicht als Dienstleister zu verstehen'''.</div><br />
<br />
Wenn die Initialkosten abbezahlt sind wird der Preis für Metalab-Mitglieder auf die Wartungskosten für den Laser reduziert.<br />
<br />
=== Kassaleerung ===<br />
<br />
Falls die Lazzzor Kassa voll sein solte, melde dies bitte einem der Lazzzor - Verantwortlichen oder an [[Datei:Core.png]]<br />
<br />
== Was kann man NICHT schneiden? ==<br />
* '''Metalle''' (auch keine sehr dünnen.)<br />
* '''Polystyrol''', giftige gase und unvorteilhaftes brandverhalten [https://de.wikipedia.org/wiki/Polystyrol#Brandverhalten *]<br />
* '''Polyvinylchlorid (PVC)''', denn beim Schneiden dieser Kunststoffe entstehen giftige Gase!<br />
* '''Polycarbonat (PC)''', Polycarbonat ist mit Hitze nicht gut schneidbar, die Kanten verkleben und stinken. <br />
* '''MDF''' (denn der Kleber im MDF verdreckt die Optik extrem schnell)<br />
* http://entropie.digital.udk-berlin.de/wiki/Laser_Cutter#What_NOT_to_do_with_a_laser_cutter<br />
* http://www.techshop.ws/docs/pdf/techshop_laser_cutter_sbu_v2_4.pdf<br />
* '''Carbonfaserplatten'''. Laserstrahl wird an den Fasern zerstreut, dringt nicht ins Material ein, und heizt bis zum Delaminieren.<br />
<br />
== Was kann man machen / ist möglich? ==<br />
<gallery><br />
Bild:3026073905 cd9c202ce7.jpg<br />
Bild:2949655546 d68f1345d0.jpg<br />
Bild:3049266118 782be12f8e.jpg<br />
Bild:3033540368 a5bea99ae6.jpg<br />
</gallery><br />
* http://www.thingiverse.com/ - ganz tolle sammlung von creativecommons/opensource modellen zum runterladen und selberlasern/reprappen.<br />
* http://www.engraveyourtech.com/ - eine firma die da professionell macht, nette ideen im blog.<br />
* http://www.lasercuttingshapes.com/page/materials<br />
<br />
== Bezugsquellen ==<br />
<p><br />
[[Datei:Sortiment1.jpg|200px|thumb|left|Materialsamples von plexiglas-shop.com]][[Datei:Sortiment2.jpg|200px|thumb|right|Materialsamples von plexiglas-shop.com]]<br />
<br />
=== Plexi / Acryl / Other ===<br />
* http://www.acrylstudio.at/<br />
* http://www.graviermaterial.at/ (ab 1m² pro Stärke)<br />
* http://wettlinger.at/<br />
* http://www.plexiglas-shop.com/AT/<br />
* http://hbholzmaus.eshop.t-online.de/ unglaublich günstiges acryl und PETG! <br />
</p><br />
<br />
=== Holz ===<br />
* http://www.fabianholz.at - 6mm Sperrholz Pappel eignet sich gut<br />
* Hornbach in Wien (gute Preise)<br />
<br />
== Wartung Laser und Filter ==<br />
: <div style="background-color:white; padding:10px;">'''Funktioniert der Laser nicht wie er soll? Motiviert dir die Hände schmutzig zu machen?<br />[[Lazzzor/How_to_maintain_Lazzzor|Hier gibts mehr Infos zur Wartung]]'''</div><br />
<br />
=== Filteranlage Kappa LN 230-ZA ===<br />
<br />
* [[Media:KappaLN220-230.pdf|Betriebs- und Wartungsanleitung LN 220-230]]<br />
* [[Media:KappaLN220-230Ersatzteilliste.pdf|Ersatzteilliste Filter]]<br />
<br />
'''Nachbestellungen:'''<br />
Kappa Arbeitsschutz & Umwelttechnik GmbH http://www.kappa.at<br />
Kontakt: Marlovits Sandra s.marlovits@kappa.at<br />
<br />
=== Anleitungen Epilog 36EXT ===<br />
* [[Media:Lazzzor Settings Metalab.pdf| Lazzzor Settings PDF]]<br />
* [[Media:Epilog36ExtManual.pdf|Epilog 36EXT User Manual]]<br />
* [[Media:EpilogServiceManual.pdf|Epilog International Service Manual]]<br />
* [[Media:Epilog36EXTAlignMirrors.pdf|Epilogs Tips How to align Mirrors/Laser]]<br />
<br />
=== Drivers ===<br />
<br />
* [http://www.epiloglaser.com/downloads_ext.htm Epilog drivers]<br />
* [[Ctrl-Cut]] - teh future, it haz teh brightness<br />
<br />
==Cheats==<br />
* Focus:<br />
** Press Stop and then Focus on the machine: '''Focus on the homeposition''', rather then 50 mm diagonally shifted from home..<br />
** XY-Off, Go: Free moving mode. OK thats not a cheat. NOW: keyboard '''cursor up/down moves the table up down'''. Cool! Also works after pressing "focus", without "go" afterwards..<br />
** Autofocus happens at the first cut/engrave position of the file.<br />
* Engrave:<br />
** "bottom up" is sometimes better, depends on the direction of the fumes. Fumes should move away from the deep parts.<br />
** Stucki Rastering is nice.. Brighten=different gamma<br />
** panel 3d mode: Not the position of the laser pulses is rastered, but instead the laser-power changes by the gray level. So the laser seems to be constantly on. Needs more Laserpower than in the tables (+30%?).<br />
** Engrave speed and Power can be changed while the job is lazzoring. Not possible for vector! Press spee/powerd, and cursor up or down, go to apply<br />
** Plastic: Engrave whith cover foil removed. <br />
** Plastic: engrave 1.5 mm out of focus=smoother surfaces.<br />
** Plastic: second pass with low power settings: removes dirt from the depths.<br />
** Plastic: can be wetted for less melting..<br />
** Anodizes Aluminium: LOW POWER, High Speed, maybe multiple passes are recommended in the manual.<br />
** Glas: Coat Area with dish soap. Afterwards, polish with scotchbrite<br />
** Delrin: super for 3d engrave<br />
** Colorized Depths: Apply Wax to the top,engrave, color, sand top.<br />
<br />
* Homeing:<br />
** Center Engrave option in the driver-panel: where home is, e.g. move home from left top to center point, so you can engrave text on the center of a circle...<br />
* General<br />
** Multiple passes=print tab->number of copies...<br />
** The rulers can be flipped to take out the hexahedral baseplate.<br />
<br />
* [[Laser/Experiments|Laser experiments]]<br />
<br />
[[Kategorie:Maschinen]]<br />
[[Kategorie:Lazzzor]]<br />
[[Kategorie:WhateverLab]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=DPC_Spieledesignwettbewerb&diff=56256
DPC Spieledesignwettbewerb
2015-03-04T16:30:59Z
<p>Chrysn: details zum event</p>
<hr />
<div>{{Veranstaltung<br />
|name=DPC Spieledesignwettbewerb 2015<br />
|involved=[[User:chrysn]]<br />
|when=12.03.2015, 19:00<br />
|category=Usergroup<br />
|status=planning<br />
}}<br />
<br />
Kick-off-Treffen für den im Zuge der [https://dpcvienna.wordpress.com/ Don't Panic Convention] abgehaltenen Spieledesignwettbewerb für Blinde und Sehbehinderte<br />
<br />
=== Ausschreibungstext ===<br />
<br />
Die Vielfalt moderner Spiele ist riesig...sofern man sie sehen kann.<br />
Denn Spiele für Blinde und Sehbehinderte zu designen ist eine<br />
besondere Herausforderung, und auch die Fertigung ist aufwendiger. Da<br />
es sich um einen Nischenmarkt handelt ist die Auswahl an Spielen sehr<br />
gering.<br />
<br />
Doch die Don’t Panic Convention 2015 soll nicht nur ein Fundraising<br />
Event für den Blindenverband sein, es ist auch eine Chance eine Brücke<br />
zwischen sehenden und blinden Spielern zu schlagen.<br />
<br />
Daher rufen wir zum „Don’t Panic Spieledesign Wettbewerb 2015“!<br />
<br />
Du hast eine Idee für ein blindentaugliches Spiel? Perfekt!<br />
<br />
Oder willst dein Lieblingsspiel modifizieren um auch Sehbehinderte<br />
einzuschließen? Mach mit!<br />
<br />
<br />
<br />
Lasst eure Kreativität Wirklichkeit werden:<br />
<br />
Das Metalab in Wien hat uns Zugang zu seiner Werkstätte gesponsort.<br />
Von der CNC-Fräse bis zum modernen Lasercutter ist alles vorhanden um<br />
eure Spieleprototypen zu fertigen. Von uns betreut werdet ihr aus<br />
eurer Fantasie Realität werden lassen.</div>
Chrysn
https://metalab.at/wiki/index.php?title=Laser/Experiments&diff=50685
Laser/Experiments
2013-06-19T23:52:57Z
<p>Chrysn: current curring value for leather</p>
<hr />
<div>== about ==<br />
This section explores different possibilities of parameters and their outcome.<br />
This is a good place to get you an idea on how to fine tune your parameters.<br />
<br />
Material:<br />
<br />
* The material<br />
** different parameters 1<br />
** different parameters 2<br />
** different parameters 3<br />
<br />
* Soap<br />
** engraving a soap ended in the soap swelling, or so I’ve heard.<br />
<br />
* Leather<br />
** Got a 1,5mm raw dark-brown leather, cutting goes incredibly well, but on one side it goes better then on the other. Speed: 45 or 40, Power: 100, Freq.: 2500<br />
** Engraving is not soo good, you can see the engraved parts, but only on 100/100, and then its not even black or something... May this depends on your leather<br />
<br />
* Thin felt ([http://www.creativehobbiesgroup.com/product/8436460 knorrprandel Bogen 1mm])<br />
** Speed 100%<br />
** Power 10%<br />
** Pulse frequency 2500Hz<br />
<br />
== ideas ==<br />
* making a example raster / vector file for experimental cuts<br />
** using color mapping for different speed/power/frequency in one job..<br />
<br />
[[Kategorie:English]]<br />
[[Kategorie:Lazzzor]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=Debienna&diff=50422
Debienna
2013-05-25T14:54:35Z
<p>Chrysn: info-box aktualisiert, nicknamekleinschreibung angepasst, redundanzen eliminiert</p>
<hr />
<div>{{RecurringEvent}}<br />
{{Usergroup<br />
|logo=Debienna.png<br />
|organizer=[[User:chrysn|chrysn]], ..<br />
|topic=Debian GNU/Linux<br />
|targetgroup=<br />
|homepage=http://debienna.at/<br />
|email=[mailto:debienna@lists.debienna.at debienna@lists.debienna.at]&nbsp;([http://lists.debienna.at/cgi-bin/mailman/listinfo/debienna <abbr title="List info">LI</abbr>])<br />
|irc=irc://irc.debian.org/#debian.or.at<br />
|startdate=<br />
|status=active<br />
|meetings=gelegentlich auch im Metalab<br />
|description=<br />
}}<br />
<br />
<br />
Treffen von Debian-Usern in Wien, das gelegentlich auch im Metalab abgehalten wird. Terminplanung erfolgt über die [http://debienna.at/ Debienna-Website], wird aber auch im [http://metalab.at/cal/ Metalab-Kalender] eingetragen.<br />
<br />
[[Kategorie:Usergroups]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=Debienna&diff=48898
Debienna
2013-04-11T15:15:20Z
<p>Chrysn: artikel ueber debienna (findet wieder mal im metalab statt)</p>
<hr />
<div>Treffen von Debian-Usern in Wien, das gelegentlich auch im Metalab abgehalten wird<br />
<br />
'''Website'''<br />
: http://www.debienna.at/<br />
<br />
'''IRC'''<br />
: irc://irc.debian.org/#debian.or.at<br />
<br />
'''Mailingliste'''<br />
: http://lists.debienna.at/cgi-bin/mailman/listinfo/debienna</div>
Chrysn
https://metalab.at/wiki/index.php?title=OldLaser&diff=47233
OldLaser
2013-02-12T15:51:28Z
<p>Chrysn: /* Cheats */ linked orphaned page</p>
<hr />
<div>{{Maschinenring}}<br />
{{Languages}}<br />
<br />
{{Machine<br />
|image=Lasercutter.jpg<br />
|owner=Metalab<br />
|status=Aktiv<br />
|requirestraining=Ja<br />
|requiresauth=[[Lazzzorauth|Ja]]<br />
|cost=pro Minute: 1,50€ für Nicht-Mitglieder, 1€ für Mitglieder<br />
|teachers=[[User:MariusKintel|MariusKintel]], [[User:wizard23|wizard23]], [[User:Fin|fin]], [[User:amir|amir]], [[User:Red667|Red667]], [[User:Mind|Mind]], [[User:overflo|overflo]], [[User:jain7th|jain7th]], [[User:metaz|meta]], [[User:mzeltner|mzeltner]],[[User:Vierlex|vierlex]]<br />
}}<br />
<br />
<br />
__TOC__<br />
[[Bild:Lazzzor3943745582 d75e2e9525 o.jpg|thumb|240px|right|Der Lasercutter beim Schneiden von Acryl]]<br />
<br />
{|<br />
| Die Soup zum Lazzzor → '''[http://lazzzor.soup.io lazzzor.soup.io]'''<br />
|[[Bild:Soup badge.png|16px]]<br />
|}<br />
<br />
<br />
Wir haben einen [http://www.epiloglaser.com/legend_36ext.htm Epilog Legend 36EXT] Lasercutter (60 W-Version).<br />
<br />
Generell kann man damit aus einer Vielzahl von Materialien (Holz, viele Kunststoffe, Papier, etc.) beliebige 2D-Formen ausschneiden. Metalle können nur graviert aber nicht geschnitten werden. Der LASER ist auf einen extrem kleinen Punkt fokussiert. Der Schnitt ist dünner als ein Zehntel mm. Was man damit machen kann sieht man z.B. in unserem '''[http://lazzzor.soup.io/ Lazzzor Blog]''' oder bei [http://brepettis.com/blog/category/lazzzor/ Bre Pettis]<br />
<br />
== Anleitung ==<br />
Wenn man etwas mit dem Laser schneiden oder gravieren will dann wendet man sich an [[Datei:core.png]] (''vor allem für dringende Anfragen'') oder besser direkt an einen Lazzzor-Verantwortlichen; Das sind bisher: <br />
* [[User:MariusKintel|MariusKintel]]<br />
* [[User:wizard23|wizard23]]<br />
* [[User:Fin|fin]]<br />
* [[User:amir|amir]]<br />
* [[User:Red667|Red667]]<br />
* [[User:Mind|Mind]]<br />
* [[User:overflo|overflo]]<br />
* [[User:jain7th|jain7th]] <br />
* [[User:metaz|meta]]<br />
* [[User:mzeltner|mzeltner]]<br />
* [[User:Vierlex|Vierlex]]<br />
<br />
Wenn du Lazzzor-Verantwortlicher werden willst musst du das [[Laser Cutter Workshop]] besuchen und die Lazzzor-Pruefung bestehen.<br />
<br />
==== Checkliste ====<br />
<br />
☐ Lüftung einschalten<br><br />
☐ Hoffenster schließen<br><br />
☐ Türe zum Hauptraum schließen<br><br />
☐ sämtliche Türen zum Hof (Werkstatt, Gang, …) schließen<br><br />
<br />
=== Was muss man beachten ===<br />
* Zum Schneiden Vectorfiles: DXF, SVG, AI, EPS, PDF, ...<br />
* Zum Gravieren beliebiges Bild.<br />
* Der Laser kann schneiden und gravieren. Vektoren mit der Dicke 0 werden geschnitten alle anderen Vektoren und Bitmaps werden graviert. Manual: Linienbreiten 0.001-0.007 inch=0.0254-0.177mm werden geschnitten. Engrave: Für die DPI zu dünne Linien werden nicht graviert->Manual!<br />
* Darauf achten, dass nicht mehrere Linien übereinander liegen sonst werden diese doppelt geschnitten.<br />
* Größe des Laser-Arbeitsbereiches: 914x609mm (36x24")<br />
* '''neu!''' für einen detaillierten Leitfaden siehe [[Lazzzor/How_to_Lazzzor|How to Lazzzor]]<br />
<br />
=== Software zum Entwerfen ===<br />
Zum Zeichnen der Entwürfe empfahl der Wizzzard mal http://www.qcad.org/qcad.html . Schlechte Erfahrungen haben wir mit http://www.inkscape.org/, weil das keine Haarlinien macht und man dann doch wieder die Zeichnungen in CorelDraw übernehmen mus. [http://en.wikipedia.org/wiki/CorelDRAW CorelDraw] ist am Lazzzor PC installiert und wird andauernd verwendet, kostet aber Geld und ist auch nicht perfekt.<br />
<br />
=== Drivers ===<br />
<br />
* [http://www.epiloglaser.com/downloads_ext.htm Epilog drivers]<br />
* [[Ctrl-Cut]] - teh future, it haz teh brightness<br />
<br />
== Kosten ==<br />
Für die reine Laserzeit fallen folgende Kosten an:<br />
* 1,00 € pro Minute für Metalab-Mitglieder<br />
* 1,50 € pro Minute für Nichtmitglieder <br />
: <div style="background-color:white; padding:10px;">'''Bitte beachten:''' Der Aufwand für allf. notwendige Aufbereitungshilfe der Dateien und die Zeit des/der Laserbeauftragten ist in diesem Preis '''nicht inkludiert''' und sollte '''vor der Arbeit''' vereinbart werden. Wenn Du einen hilfsbereite Aufsichtsperson gefunden hast, so sprich sie darauf selbständig an. Bedenke, es gibt keine Angestellten und keine Garantien. Das Metalab ist ein Verein der seinen Mitgliedern im Rahmen seiner Zielsetzung mit Infrastruktur versorgen will. Er ist '''nicht als Dienstleister zu verstehen'''.</div><br />
<br />
Wenn die Initialkosten abbezahlt sind wird der Preis für Metalab-Mitglieder auf die Wartungskosten für den Laser reduziert.<br />
<br />
=== Kassaleerung ===<br />
<br />
Falls die Lazzzor Kassa voll sein solte, melde dies bitte einem der Lazzzor - Verantwortlichen oder an [[core|core@metalab.at]]<br />
<br />
== Was kann man NICHT schneiden? ==<br />
* Metalle (auch keine sehr dünnen.)<br />
* Polyvinylchlorid (PVC), denn beim Schneiden dieser Kunststoffe entstehen giftige Gase!<br />
* Polycarbonat (PC), Polycarbonat ist mit Hitze nicht gut schneidbar, die Kanten verkleben und stinken. <br />
* MDF (denn der Kleber im MDF verdreckt die Optik extrem schnell)<br />
* http://entropie.digital.udk-berlin.de/wiki/Laser_Cutter#What_NOT_to_do_with_a_laser_cutter<br />
* http://www.techshop.ws/docs/pdf/techshop_laser_cutter_sbu_v2_4.pdf<br />
* Carbonfaserplatten. Laserstrahl wird an den Fasern zerstreut, dringt nicht ins Material ein, und heizt bis zum Delaminieren.<br />
<br />
== Was kann man schneiden/gravieren? ==<br />
<br />
* http://www.thingiverse.com/ - ganz tolle sammlung von creativecommons/opensource modellen zum runterladen und selberlasern/reprappen.<br />
* http://www.engraveyourtech.com/ - eine firma die da professionell macht, nette ideen im blog.<br />
* http://www.lasercuttingshapes.com/page/materials<br />
<br />
== Bezugsquellen ==<br />
<p><br />
[[Datei:Sortiment1.jpg|200px|thumb|left|Materialsamples von plexiglas-shop.com]]<br />
[[Datei:Sortiment2.jpg|200px|thumb|left|Materialsamples von plexiglas-shop.com]]<br />
<br />
* http://www.graviermaterial.at/<br />
* http://www.augmueller.at/<br />
* http://wettlinger.at/<br />
* http://www.plexiglas.de<br />
* http://www.plexiglas-shop.com/DE/de/index.htm<br />
* http://hbholzmaus.eshop.t-online.de/ unglaublich günstiges acryl und PETG! <br />
</p><br />
<br />
=== Holz ===<br />
* http://www.fabianholz.at - 6mm Sperrholz Pappel eignet sich gut<br />
* Hornbach in Wien (gute Preise)<br />
<br />
== Wartung Laser und Filter ==<br />
[[Lazzzor/How_to_maintain_Lazzzor|Hier gibts mehr Infos zur Wartung]]<br />
<br />
<br />
=== Filteranlage Kappa LN 230-ZA ===<br />
<br />
* [[Media:KappaLN220-230.pdf|Betriebs- und Wartungsanleitung LN 220-230]]<br />
* [[Media:KappaLN220-230Ersatzteilliste.pdf|Ersatzteilliste Filter]]<br />
<br />
'''Nachbestellungen:'''<br />
Kappa Arbeitsschutz & Umwelttechnik GmbH http://www.kappa.at<br />
Kontakt: Marlovits Sandra s.marlovits@kappa.at<br />
<br />
=== Anleitungen Epilog 36EXT ===<br />
* [[Media:Epilog36ExtManual.pdf|Epilog 36EXT User Manual]]<br />
* [[Media:EpilogServiceManual.pdf|Epilog International Service Manual]]<br />
<br />
== Daten zum Gerät ==<br />
<br />
* 36" x 24" (914 x 609 mm) Schnittfläche<br />
* 890mmx590mm real Schnittfläche<br />
* 60 Watt Laserkraft<br />
<br />
== Inspiration ==<br />
<br />
<gallery><br />
Bild:3026073905 cd9c202ce7.jpg<br />
Bild:2949655546 d68f1345d0.jpg<br />
Bild:3049266118 782be12f8e.jpg<br />
Bild:3033540368 a5bea99ae6.jpg<br />
</gallery><br />
<br />
==Cheats==<br />
* Focus:<br />
** Press Stop and then Focus on the machine: '''Focus on the homeposition''', rather then 50 mm diagonally shifted from home..<br />
** XY-Off, Go: Free moving mode. OK thats not a cheat. NOW: keyboard '''cursor up/down moves the table up down'''. Cool! Also works after pressing "focus", without "go" afterwards..<br />
** Autofocus happens at the first cut/engrave position of the file.<br />
* Engrave:<br />
** "bottom up" is sometimes better, depends on the direction of the fumes. Fumes should move away from the deep parts.<br />
** Stucki Rastering is nice.. Brighten=different gamma<br />
** panel 3d mode: Not the position of the laser pulses is rastered, but instead the laser-power changes by the gray level. So the laser seems to be constantly on. Needs more Laserpower than in the tables (+30%?).<br />
** Engrave speed and Power can be changed while the job is lazzoring. Not possible for vector! Press spee/powerd, and cursor up or down, go to apply<br />
** Plastic: Engrave whith cover foil removed. <br />
** Plastic: engrave 1.5 mm out of focus=smoother surfaces.<br />
** Plastic: second pass with low power settings: removes dirt from the depths.<br />
** Plastic: can be wetted for less melting..<br />
** Anodizes Aluminium: LOW POWER, High Speed, maybe multiple passes are recommended in the manual.<br />
** Glas: Coat Area with dish soap. Afterwards, polish with scotchbrite<br />
** Delrin: super for 3d engrave<br />
** Colorized Depths: Apply Wax to the top,engrave, color, sand top.<br />
<br />
* Homeing:<br />
** Center Engrave option in the driver-panel: where home is, e.g. move home from left top to center point, so you can engrave text on the center of a circle...<br />
* General<br />
** Multiple passes=print tab->number of copies...<br />
** The rulers can be flipped to take out the hexahedral baseplate.<br />
<br />
* [[Laser/Experiments|Laser experiments]]<br />
<br />
[[Kategorie:Maschinen]]<br />
[[Kategorie:Lazzzor]]<br />
[[Kategorie:WhateverLab]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=Laser/Experiments&diff=44563
Laser/Experiments
2012-12-01T18:17:15Z
<p>Chrysn: lazzzored felt</p>
<hr />
<div>== about ==<br />
This section explores different possibilities of parameters and their outcome.<br />
This is a good place to get you an idea on how to fine tune your parameters.<br />
<br />
Material:<br />
<br />
* The material<br />
** different parameters 1<br />
** different parameters 2<br />
** different parameters 3<br />
<br />
* Soap<br />
** engraving a soap ended in the soap swelling, or so I’ve heard.<br />
<br />
* Leather<br />
** Got a 1,5mm raw dark-brown leather, cutting goes incredible good, but on one side it goes better then on the other. Speed: 45, Power: 100, Freq.: 2500<br />
** Engraving is not soo good, you can see the engraved parts, but only on 100/100, and then its not even black or something... May this depends on your leather<br />
<br />
* Thin felt ([http://www.creativehobbiesgroup.com/product/8436460 knorrprandel Bogen 1mm])<br />
** Speed 100%<br />
** Power 10%<br />
** Pulse frequency 2500Hz<br />
<br />
== ideas ==<br />
* making a example raster / vector file for experimental cuts<br />
** using color mapping for different speed/power/frequency in one job..<br />
<br />
<br />
[[Category:Dokumentation]]<br />
[[Category:Lazzzor]]<br />
[[Category:English]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=Laser_Cutter_Workshop&diff=44493
Laser Cutter Workshop
2012-11-28T20:14:19Z
<p>Chrysn: redirect used to go to a particular workshop in the past, redirect to the current generic page</p>
<hr />
<div>#REDIRECT[[Lazzzor Cutter Workshop]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=Linuxwochenende/2012&diff=44135
Linuxwochenende/2012
2012-11-09T07:07:46Z
<p>Chrysn: datum geaendert entsprechend cfp auf dieser seite und linuxwochende-website</p>
<hr />
<div>Sa. '''24.11.2012''', So. '''25.11.2012''' [[Lage|im Metalab]]<br />
<br />
CfP und weitere Details (demnächst) unter → http://linuxwochenende2012.luga.at<br />
<br />
<br />
<small>CfP:</small><br />
<pre><br />
---------------------- Praeambel ----------------------<br />
Wenn Du eine Mailingliste oder Person kennst, an die<br />
dieser Call-For-Papers sinnvollerweise geschickt werden<br />
sollte, so fuehle dich hiermit aufgefordert das zu tun.<br />
-------------------------------------------------------<br />
<br />
Hallo,<br />
<br />
Dieses Jahr findet am 24./25. November 2012 das fünfte Mal das<br />
Linuxwochenende im Wiener Metalab statt. Dabei handelt es sich um ein<br />
Vortragswochenende rund um Linux und Freie Software.<br />
<br />
Mehr Informationen zum Linuxwochenende 2012 gibt es auf unserer<br />
Homepage:<br />
<br />
http://linuxwochenende2012.luga.at/<br />
<br />
Die thematischen Schwerpunkte des Linuxwochenendes liegen in den<br />
Bereichen Systemadministration (zum Beispiel: Datenbanken, Serverfarmen,<br />
automatisierte Installationen, Backup, Verzeichnisdienste, praktische<br />
Software, ..), Entwicklung (zum Beispiel: Programmiersprachen,<br />
Libraries, Sourcecodemanagement, Tools, ...) und coole Hacks (zum<br />
Beispiel: Linux auf der Microwelle, ...).<br />
<br />
Ungeachtet des Namens richtet sich das Linuxwochenende an Benutzerinnen<br />
und Benutzer von Freier Software im allgemeinen und nicht<br />
ausschliesslich an Linux-Begeisterte.<br />
<br />
Zielgruppe sind Geeks, EnthusiastInnen, AdministratorInnen,<br />
EntwicklerInnen und natuerlich auch solche die es werden wollen. Wir<br />
suchen Vortragende, die mit ihrem Vortrag gerne diese Zielgruppe<br />
erreichen wollen.<br />
<br />
Vortraege koennen bis 28. Oktober 2012 im CfP-Manager eingereicht<br />
werden:<br />
<br />
http://linuxwochenende2012.luga.at/cfpmanager/<br />
<br />
Es besteht die Moeglichkeit sowohl 40-minuetige Vortraege als auch<br />
5-minuetige Lightning-Talks einzureichen.<br />
<br />
Wir freuen uns auf Deine Einreichung,<br />
<br />
- Das Programmteam des Linuxwochenendes 2012<br />
<br />
</pre><br />
<br />
<br />
[[Kategorie:Veranstaltungen]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=Bauteilsortiment&diff=43689
Bauteilsortiment
2012-10-18T15:12:20Z
<p>Chrysn: /* Lieferanten */ rs liefert nur an firmen/vereine</p>
<hr />
<div>[[Bild:Color_codes.png|250px|right]]<br />
Liste von Komponenten fuer das Elektroniklabor. Modus: Wer Teile benutzt, wirft<br />
den entsprechenden Betrag in eine Kasse ein. Von dem Geld aus der Kasse werden<br />
die Teile dann kontinuierlich nachgekauft.<br />
<br />
Wir (Astrid und Clifford) werden die Teile besorgen und (vorausgesetzt, dass<br />
das Geld dafuer auch in der Kasse landet) nachkaufen. Wir werden ebenfalls<br />
eine Mentor Graphics Design Library fuer unsere Teile mit Schematic und<br />
PCB Symbolen erstellen und warten.<br />
<br />
Die Einkaufspreise beziehen sich auf eine Verpackung mit der angegebenen<br />
Anzahl von Teilen und sind incl. MWSt und Zoll. Die Metalab-Preise beziehen<br />
sich auf jeweils ein Stueck und sind Brutto-Preise.<br />
<br />
Gegenueber dem Bauteilsortiment befinden sich im Whateverlab persoenliche Faecher.<br />
Diese koennen einfach durch Beschriften eines Faches (bitte die dafuer vorgesehenen<br />
Etiketten verwenden) in besitz genommen werden. In diesen persoenlichen Faechern<br />
koennen unter Anderem gekaufte Bauteile aufbewahrt werden.<br />
<br />
Das Bauteilsortiment wird mit [http://svn.clifford.at/metaparts/trunk/sortiment/ diesem Script] verwaltet.<br />
<br />
Diese Seite sieht am Besten mit dem [http://metalab.at/wiki/Bauteilsortiment?useskin=monobook Monobook Skin] aus.<br />
<br />
'''ACHTUNG:''' Neue Teile bitte nur in den Abschnitt "Weitere Vorschläge (review later)" eintragen!<br />
<br />
==Lageplan und Photo==<br />
<br />
[[Bild:Bauteilsortiment_Lageplan.png|400px]]<br />
<br />
__TOC__<br />
<br />
[[Bild:Bauteilsortiment_Photo.jpg|400px]]<br />
<br />
==Tools und Bibliotheken==<br />
<br />
===Widerstandsrechner===<br />
<br />
Wir haben nur die E6 Widerstandsreihe im Sortiment. Fuer Widerstandswerte,<br />
die davon nicht abgedeckt werden, muessen mehrere Widerstaende kombiniert<br />
werden. Das finden passender Kombinationen erledigt folgender<br />
Widerstandsrechner, der in JavaScript implementiert ist und im Browser<br />
laeuft:<br />
<br />
http://svn.clifford.at/tools/trunk/electrotools/rcalc.html<br />
<br />
ACHTUNG: Das script braucht einige Zeit zum initialisieren. Also einfach auf "CONTINUE" clicken, falls der browser fragt ob er das laufende script abbrechen soll..<br />
<br />
===Spannungsteiler-Rechner===<br />
<br />
Unter anderem zur Einstellung von Festspannungsreglern ist es oft notwendig<br />
Spannungsteiler aufzubauen. Dieses Tool hilft dabei die richtige Kombination<br />
von E6 Widerstandswerten fuer den gewuenschten Spannungsteiler zu finden.<br />
<br />
http://svn.clifford.at/tools/trunk/electrotools/vdcalc.html<br />
<br />
===AC RLC-Filter Rechner===<br />
<br />
Beim Design von Analogschaltungen benoetigt man immer wieder mal schnell<br />
ein Tool zur Simulation einfacher RLC-Filter. Dieses im Browser lauffaehige<br />
JavaScript-Tool ist fuer solche Faelle eine grosse Hilfe:<br />
<br />
http://svn.clifford.at/tools/trunk/electrotools/fcalc.html<br />
<br />
===Schaltungsgenerator fuer Lineare OpAmp Schaltungen===<br />
<br />
Mit Operationsverstaerkern und widerstaenden kann man jede lineare Funktion<br />
als Schaltung implementieren. Dieses im Browser lauffaehige JavaScript-Tool<br />
hilft bei der Dimensionierung der Widerstandswerte:<br />
<br />
http://svn.clifford.at/tools/trunk/electrotools/oplinfunc.html<br />
<br />
===Equation Solver===<br />
<br />
Immer wieder kommt man in situation wo ein einfacher Taschenrechner nicht<br />
mehr reicht. Dieser einfache im Browser lauffaehiger Equation-Solver kann<br />
in manchen dieser Faelle einspringen:<br />
<br />
http://svn.clifford.at/tools/trunk/electrotools/eqsolver.html<br />
<br />
===DC und Transienten Simulator===<br />
<br />
Wenn man gerade kein spice derivat griffbereit hat reicht manchmal auch<br />
einfach nur ein Webbrwoser mit Javascript-Support bereits aus:<br />
<br />
http://svn.clifford.at/tools/trunk/electrotools/circuitsim.html<br />
<br />
===EAGLE Cad Symbol Library===<br />
<br />
Es gibt eine EAGLE Cad Symbol Library fuer (fast) das vollstaendige Bauteilsortiment. Die Library gibt es in der jeweils aktuellen version hier zum download:<br />
<br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;'''[[Media:MetaParts_EagleLbr.zip]]'''<br />
<small>([[:Image:MetaParts_EagleLbr.zip|info]])</small><br />
<br />
Die Sourcen zur Library liegen im SVN unter http://svn.clifford.at/metaparts/trunk/eagle_lbr/.<br />
<br />
==Bauteile==<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
===Widerstaende (Axial, Niederohm)===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
Einheitspreis fuer Widerstaende unter 1 Ohm: 0,50 EUR<br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Widerstand !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| H5 || 0,22 Ohm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=135-500 135-500] ||style="color:#888"| 10 ||style="color:#888"| 3,456 EUR ||style="color:#888"| 0,346 EUR<br />
|- <br />
| H6 || 0,33 Ohm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=135-516 135-516] ||style="color:#888"| 10 ||style="color:#888"| 3,456 EUR ||style="color:#888"| 0,346 EUR<br />
|- style="background:#ccc;"<br />
| H7 || 0,47 Ohm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=135-522 135-522] ||style="color:#888"| 10 ||style="color:#888"| 3,456 EUR ||style="color:#888"| 0,346 EUR<br />
|- <br />
| H8 || 0,68 Ohm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=135-544 135-544] ||style="color:#888"| 10 ||style="color:#888"| 3,456 EUR ||style="color:#888"| 0,346 EUR<br />
|}<br />
<br />
===Widerstaende (Axiale Bauform)===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
E6 Reihe von 1 Ohm bis 10 MOhm.<br />
<br />
Alle als 0,6W Metallschichtwiderstand mit 1% Toleranz.<br />
<br />
Besonders viele: 470 Ohm, 1 kOhm, 4.7 kOhm, 10 kOhm, 100 kOhm<br />
<br />
Einheitspreis fuer alle Widerstaende ab 1 Ohm: 0,10 EUR<br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Widerstand !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| H9 || 1 Ohm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=477-7423 477-7423] ||style="color:#888"| 50 ||style="color:#888"| 1,860 EUR ||style="color:#888"| 0,037 EUR<br />
|- <br />
| I5 || 1,5 Ohm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=477-7445 477-7445] ||style="color:#888"| 50 ||style="color:#888"| 1,860 EUR ||style="color:#888"| 0,037 EUR<br />
|- style="background:#ccc;"<br />
| I6 || 2,2 Ohm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-4403 506-4403] ||style="color:#888"| 50 ||style="color:#888"| 1,860 EUR ||style="color:#888"| 0,037 EUR<br />
|- <br />
| I7 || 3,3 Ohm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-4453 506-4453] ||style="color:#888"| 50 ||style="color:#888"| 1,860 EUR ||style="color:#888"| 0,037 EUR<br />
|- style="background:#ccc;"<br />
| I8 || 4,7 Ohm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-4497 506-4497] ||style="color:#888"| 50 ||style="color:#888"| 1,860 EUR ||style="color:#888"| 0,037 EUR<br />
|- <br />
| I9 || 6,8 Ohm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-4526 506-4526] ||style="color:#888"| 50 ||style="color:#888"| 1,860 EUR ||style="color:#888"| 0,037 EUR<br />
|- style="background:#ccc;"<br />
| M0 || 10 Ohm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=477-7568 477-7568] ||style="color:#888"| 50 ||style="color:#888"| 1,608 EUR ||style="color:#888"| 0,032 EUR<br />
|- style="background:#ccc;"<br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-0010 113-0010] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- <br />
| M1 || 15 Ohm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=477-7574 477-7574] ||style="color:#888"| 50 ||style="color:#888"| 1,608 EUR ||style="color:#888"| 0,032 EUR<br />
|- <br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-0015 113-0015] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- style="background:#ccc;"<br />
| M2 || 22 Ohm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-4627 506-4627] ||style="color:#888"| 50 ||style="color:#888"| 1,608 EUR ||style="color:#888"| 0,032 EUR<br />
|- style="background:#ccc;"<br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-0022 113-0022] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- <br />
| M3 || 33 Ohm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-4683 506-4683] ||style="color:#888"| 50 ||style="color:#888"| 1,608 EUR ||style="color:#888"| 0,032 EUR<br />
|- <br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-0033 113-0033] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- style="background:#ccc;"<br />
| M4 || 47 Ohm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-4728 506-4728] ||style="color:#888"| 50 ||style="color:#888"| 1,608 EUR ||style="color:#888"| 0,032 EUR<br />
|- style="background:#ccc;"<br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-0047 113-0047] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- <br />
| N0 || 68 Ohm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-4778 506-4778] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- <br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-0068 113-0068] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- style="background:#ccc;"<br />
| N1 || 100 Ohm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=477-7681 477-7681] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- style="background:#ccc;"<br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-0100 113-0100] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- <br />
| N2 || 150 Ohm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=477-7732 477-7732] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- <br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-0150 113-0150] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- style="background:#ccc;"<br />
| N3 || 220 Ohm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-4863 506-4863] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- style="background:#ccc;"<br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-0220 113-0220] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- <br />
| N4 || 330 Ohm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-4908 506-4908] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- <br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-0330 113-0330] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- style="background:#ccc;"<br />
| O0 || 470 Ohm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-4964 506-4964] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- style="background:#ccc;"<br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-0470 113-0470] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- <br />
| O1 || 680 Ohm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-5024 506-5024] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- <br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-0680 113-0680] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- style="background:#ccc;"<br />
| O2 || 1,0 kOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=477-7928 477-7928] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- style="background:#ccc;"<br />
| || ||style="color:#E45712"| CSD ||style="color:#E45712"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-K001 113-K001] ||style="color:#E45712"| 100x1 ||style="color:#E45712"| 0,020 EUR ||style="color:#E45712"| 0,020 EUR<br />
|- <br />
| O3 || 1,5 kOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=477-7962 477-7962] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- <br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-K01,5 113-K01,5] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- style="background:#ccc;"<br />
| O4 || 2,2 kOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-5096 506-5096] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- style="background:#ccc;"<br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-K002,2 113-K002,2] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- <br />
| P0 || 3,3 kOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-5169 506-5169] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- <br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-K003,3 113-K003,3] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- style="background:#ccc;"<br />
| P1 || 4,7 kOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-5210 506-5210] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- style="background:#ccc;"<br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-K004,7 113-K004,7] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- <br />
| P2 || 6,8 kOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-5276 506-5276] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- <br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-K006,8 113-K006,8] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- style="background:#ccc;"<br />
| P3 || 10 kOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=477-8246 477-8246] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- style="background:#ccc;"<br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-K010 113-K010] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- <br />
| P4 || 15 kOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=477-8296 477-8296] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- <br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-K015 113-K015] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- style="background:#ccc;"<br />
| Q0 || 22 kOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-5349 506-5349] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- style="background:#ccc;"<br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-K022 113-K022] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- <br />
| Q1 || 33 kOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-5399 506-5399] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- <br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-K033 113-K033] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- style="background:#ccc;"<br />
| Q2 || 47 kOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-5434 506-5434] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- style="background:#ccc;"<br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-K047 113-K047] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- <br />
| Q3 || 68 kOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-5478 506-5478] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- <br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-K068 113-K068] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- style="background:#ccc;"<br />
| Q4 || 100 kOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=477-8505 477-8505] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- style="background:#ccc;"<br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-K100 113-K100] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- <br />
| R0 || 150 kOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=477-8555 477-8555] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- <br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-K150 113-K150] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- style="background:#ccc;"<br />
| R1 || 220 kOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-5541 506-5541] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- style="background:#ccc;"<br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-K220 113-K220] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- <br />
| R2 || 330 kOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-5591 506-5591] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- <br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-K330 113-K330] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- style="background:#ccc;"<br />
| R3 || 470 kOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-5620 506-5620] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- style="background:#ccc;"<br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-K470 113-K470] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- <br />
| R4 || 680 kOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-5670 506-5670] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- <br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-K680 113-K680] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- style="background:#ccc;"<br />
| S0 || 1,0 MOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=477-8662 477-8662] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- style="background:#ccc;"<br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-M001 113-M001] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- <br />
| S1 || 1,5 MOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-5743 506-5743] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- <br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-M001,5 113-M001,5] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- style="background:#ccc;"<br />
| S2 || 2,2 MOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-5771 506-5771] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- style="background:#ccc;"<br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-M002,2 113-M002,2] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- <br />
| S3 || 3,3 MOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-5816 506-5816] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- <br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-M003,3 113-M003,3] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|- style="background:#ccc;"<br />
| S4 || 4,7 MOhm ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=506-5850 506-5850] ||style="color:#888"| 50 ||style="color:#888"| 1,296 EUR ||style="color:#888"| 0,026 EUR<br />
|- style="background:#ccc;"<br />
| || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=113-M004,7 113-M004,7] ||style="color:#888"| 100x1 ||style="color:#888"| 0,020 EUR ||style="color:#888"| 0,020 EUR<br />
|}<br />
<div align="right"><small>Orangene Eintraege sind zur Nachbestellung vorgemerkt.</small></div><br />
<br />
===Kapazitaeten (Keramik Kondensatoren)===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
E6 von 10 pF bis 100pF<br/><br />
E3 von 100 pF bis 470nF<br/><br />
<br />
Pinabstand: 5,00 bzw. 5,08 mm (Was im Einkauf gerade guenstiger ist)<br />
<br />
Besonders viele: 15pF, 22pF und 33pF sowie 100nF.<br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Kapazitaet !! Toleranz !! Typ !! Spannung !! Preis !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| A0 || 10 pF || 5% || C0G || 200 V || 0,30 EUR ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4319-ND 399-4319-ND] ||style="color:#888"| 10x1 ||style="color:#888"| 0,163 EUR ||style="color:#888"| 0,163 EUR<br />
|- style="background:#ccc;"<br />
| || || || || || ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4319-ND 399-4319-ND] ||style="color:#888"| 100x1 ||style="color:#888"| 0,116 EUR ||style="color:#888"| 0,116 EUR<br />
|- <br />
| A1 || 15 pF || 5% || C0G || 200 V || 0,30 EUR ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4332-ND 399-4332-ND] ||style="color:#888"| 10x1 ||style="color:#888"| 0,176 EUR ||style="color:#888"| 0,176 EUR<br />
|- <br />
| || || || || || ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4332-ND 399-4332-ND] ||style="color:#888"| 100x1 ||style="color:#888"| 0,126 EUR ||style="color:#888"| 0,126 EUR<br />
|- style="background:#ccc;"<br />
| A2 || 22 pF || 5% || C0G || 200 V || 0,30 EUR ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4344-ND 399-4344-ND] ||style="color:#888"| 10x1 ||style="color:#888"| 0,176 EUR ||style="color:#888"| 0,176 EUR<br />
|- style="background:#ccc;"<br />
| || || || || || ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4344-ND 399-4344-ND] ||style="color:#888"| 100x1 ||style="color:#888"| 0,126 EUR ||style="color:#888"| 0,126 EUR<br />
|- <br />
| A3 || 33 pF || 5% || C0G || 200 V || 0,30 EUR ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4355-ND 399-4355-ND] ||style="color:#888"| 10x1 ||style="color:#888"| 0,176 EUR ||style="color:#888"| 0,176 EUR<br />
|- <br />
| || || || || || ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4355-ND 399-4355-ND] ||style="color:#888"| 100x1 ||style="color:#888"| 0,126 EUR ||style="color:#888"| 0,126 EUR<br />
|- style="background:#ccc;"<br />
| A4 || 47 pF || 5% || C0G || 200 V || 0,30 EUR ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4365-ND 399-4365-ND] ||style="color:#888"| 10x1 ||style="color:#888"| 0,176 EUR ||style="color:#888"| 0,176 EUR<br />
|- style="background:#ccc;"<br />
| || || || || || ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4365-ND 399-4365-ND] ||style="color:#888"| 100x1 ||style="color:#888"| 0,126 EUR ||style="color:#888"| 0,126 EUR<br />
|- <br />
| B0 || 68 pF || 5% || C0G || 200 V || 0,30 EUR ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4375-ND 399-4375-ND] ||style="color:#888"| 10x1 ||style="color:#888"| 0,186 EUR ||style="color:#888"| 0,186 EUR<br />
|- <br />
| || || || || || ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4375-ND 399-4375-ND] ||style="color:#888"| 100x1 ||style="color:#888"| 0,133 EUR ||style="color:#888"| 0,133 EUR<br />
|- style="background:#ccc;"<br />
| B1 || 100 pF || 5% || C0G || 200 V || 0,30 EUR ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4320-ND 399-4320-ND] ||style="color:#888"| 10x1 ||style="color:#888"| 0,176 EUR ||style="color:#888"| 0,176 EUR<br />
|- style="background:#ccc;"<br />
| || || || || || ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4320-ND 399-4320-ND] ||style="color:#888"| 100x1 ||style="color:#888"| 0,126 EUR ||style="color:#888"| 0,126 EUR<br />
|- <br />
| B2 || 220 pF || 5% || C0G || 200 V || 0,30 EUR ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4345-ND 399-4345-ND] ||style="color:#888"| 10x1 ||style="color:#888"| 0,197 EUR ||style="color:#888"| 0,197 EUR<br />
|- <br />
| || || || || || ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4345-ND 399-4345-ND] ||style="color:#888"| 100x1 ||style="color:#888"| 0,142 EUR ||style="color:#888"| 0,142 EUR<br />
|- style="background:#ccc;"<br />
| B3 || 470 pF || 5% || C0G || 200 V || 0,30 EUR ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4366-ND 399-4366-ND] ||style="color:#888"| 10x1 ||style="color:#888"| 0,238 EUR ||style="color:#888"| 0,238 EUR<br />
|- style="background:#ccc;"<br />
| || || || || || ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4366-ND 399-4366-ND] ||style="color:#888"| 100x1 ||style="color:#888"| 0,169 EUR ||style="color:#888"| 0,169 EUR<br />
|- <br />
| B4 || 1,0 nF || 10% || X7R || 200 V || 0,30 EUR ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4323-ND 399-4323-ND] ||style="color:#888"| 10x1 ||style="color:#888"| 0,140 EUR ||style="color:#888"| 0,140 EUR<br />
|- <br />
| || || || || || ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4323-ND 399-4323-ND] ||style="color:#888"| 100x1 ||style="color:#888"| 0,101 EUR ||style="color:#888"| 0,101 EUR<br />
|- style="background:#ccc;"<br />
| C0 || 2,2 nF || 10% || X7R || 200 V || 0,30 EUR ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4348-ND 399-4348-ND] ||style="color:#888"| 10x1 ||style="color:#888"| 0,154 EUR ||style="color:#888"| 0,154 EUR<br />
|- style="background:#ccc;"<br />
| || || || || || ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4348-ND 399-4348-ND] ||style="color:#888"| 100x1 ||style="color:#888"| 0,110 EUR ||style="color:#888"| 0,110 EUR<br />
|- <br />
| C1 || 4,7 nF || 10% || X7R || 200 V || 0,30 EUR ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4369-ND 399-4369-ND] ||style="color:#888"| 10x1 ||style="color:#888"| 0,167 EUR ||style="color:#888"| 0,167 EUR<br />
|- <br />
| || || || || || ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4369-ND 399-4369-ND] ||style="color:#888"| 100x1 ||style="color:#888"| 0,120 EUR ||style="color:#888"| 0,120 EUR<br />
|- style="background:#ccc;"<br />
| C2 || 10 nF || 10% || X7R || 200 V || 0,30 EUR ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4325-ND 399-4325-ND] ||style="color:#888"| 10x1 ||style="color:#888"| 0,154 EUR ||style="color:#888"| 0,154 EUR<br />
|- style="background:#ccc;"<br />
| || || || || || ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4325-ND 399-4325-ND] ||style="color:#888"| 100x1 ||style="color:#888"| 0,110 EUR ||style="color:#888"| 0,110 EUR<br />
|- <br />
| C3 || 22 nF || 10% || X7R || 200 V || 0,30 EUR ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4350-ND 399-4350-ND] ||style="color:#888"| 10x1 ||style="color:#888"| 0,192 EUR ||style="color:#888"| 0,192 EUR<br />
|- <br />
| || || || || || ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4350-ND 399-4350-ND] ||style="color:#888"| 100x1 ||style="color:#888"| 0,137 EUR ||style="color:#888"| 0,137 EUR<br />
|- style="background:#ccc;"<br />
| C4 || 47 nF || 20% || Z5U || 100 V || 0,30 EUR ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4372-ND 399-4372-ND] ||style="color:#888"| 10x1 ||style="color:#888"| 0,144 EUR ||style="color:#888"| 0,144 EUR<br />
|- style="background:#ccc;"<br />
| || || || || || ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4372-ND 399-4372-ND] ||style="color:#888"| 100x1 ||style="color:#888"| 0,103 EUR ||style="color:#888"| 0,103 EUR<br />
|- <br />
| D0 || 100 nF || 20% || Z5U || 100 V || 0,30 EUR ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4330-ND 399-4330-ND] ||style="color:#888"| 10x1 ||style="color:#888"| 0,127 EUR ||style="color:#888"| 0,127 EUR<br />
|- <br />
| || || || || || ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4330-ND 399-4330-ND] ||style="color:#888"| 100x1 ||style="color:#888"| 0,091 EUR ||style="color:#888"| 0,091 EUR<br />
|- style="background:#ccc;"<br />
| D1 || 220 nF || 20% || Z5U || 50 V || 0,30 EUR ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4354-ND 399-4354-ND] ||style="color:#888"| 10x1 ||style="color:#888"| 0,193 EUR ||style="color:#888"| 0,193 EUR<br />
|- style="background:#ccc;"<br />
| || || || || || ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4354-ND 399-4354-ND] ||style="color:#888"| 100x1 ||style="color:#888"| 0,139 EUR ||style="color:#888"| 0,139 EUR<br />
|- <br />
| D2 || 470 nF || 20% || Z5U || 50 V || 0,30 EUR ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4374-ND 399-4374-ND] ||style="color:#888"| 10x1 ||style="color:#888"| 0,245 EUR ||style="color:#888"| 0,245 EUR<br />
|- <br />
| || || || || || ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=399-4374-ND 399-4374-ND] ||style="color:#888"| 100x1 ||style="color:#888"| 0,175 EUR ||style="color:#888"| 0,175 EUR<br />
|}<br />
<br />
===Kapazitaeten (Elkos, Radiale Bauform)===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Kapazitaet !! Spannung !! Pinabstand !! Durchmesser !! Preis !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| D3 || 1 uF || 100 V || 2 mm || 5 mm || 0,20 EUR ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=228-7041 228-7041] ||style="color:#888"| 5 ||style="color:#888"| 0,780 EUR ||style="color:#888"| 0,156 EUR<br />
|- <br />
| D4 || 2,2 uF || 100 V || 2 mm || 5 mm || 0,20 EUR ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=228-7057 228-7057] ||style="color:#888"| 5 ||style="color:#888"| 0,780 EUR ||style="color:#888"| 0,156 EUR<br />
|- style="background:#ccc;"<br />
| E0 || 10 uF || 100 V || 2 mm || 5 mm || 0,20 EUR ||style="color:#E45712"| RS ||style="color:#E45712"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=228-7079 228-7079] ||style="color:#E45712"| 5 ||style="color:#E45712"| 0,840 EUR ||style="color:#E45712"| 0,168 EUR<br />
|- <br />
| E1 || 100 uF || 100 V || 5 mm || 10 mm || 0,50 EUR ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=228-7108 228-7108] ||style="color:#888"| 5 ||style="color:#888"| 2,100 EUR ||style="color:#888"| 0,420 EUR<br />
|- style="background:#ccc;"<br />
| E2 || 470 uF || 35 V || 5 mm || 10 mm || 0,50 EUR ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=228-6795 228-6795] ||style="color:#888"| 5 ||style="color:#888"| 2,124 EUR ||style="color:#888"| 0,425 EUR<br />
|- <br />
| E3 || 1000 uF || 16 V || 5 mm || 10 mm || 0,50 EUR ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=228-6694 228-6694] ||style="color:#888"| 5 ||style="color:#888"| 2,124 EUR ||style="color:#888"| 0,425 EUR<br />
|- style="background:#ccc;"<br />
| E4 || 2200 uF || 16 V || 5 mm || 12,5 mm || 1,00 EUR ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=228-6701 228-6701] ||style="color:#888"| 5 ||style="color:#888"| 3,768 EUR ||style="color:#888"| 0,754 EUR<br />
|}<br />
<div align="right"><small>Orangene Eintraege sind zur Nachbestellung vorgemerkt.</small></div><br />
<br />
===Induktivitaeten===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Induktivitaet !! max. Strom !! Preis !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| F2 || 10 uH || 680mA || 0,20 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=146-CR010 146-CR010] ||style="color:#888"| 1 ||style="color:#888"| 0,16 EUR ||style="color:#888"| 0,160 EUR<br />
|- <br />
| F3 || 100 uH || 370mA || 0,20 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=146-CR100 146-CR100] ||style="color:#888"| 1 ||style="color:#888"| 0,16 EUR ||style="color:#888"| 0,160 EUR<br />
|- style="background:#ccc;"<br />
| F4 || 1000 uH || 130mA || 0,20 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=146-CRK01 146-CRK01] ||style="color:#888"| 1 ||style="color:#888"| 0,17 EUR ||style="color:#888"| 0,170 EUR<br />
|- <br />
| N5 || 470 uH || 2.2 A || 8,00 EUR ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=228444 228444] ||style="color:#888"| 1 ||style="color:#888"| 5,604 EUR ||style="color:#888"| 5,604 EUR<br />
|}<br />
<br />
===Ringkerne===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Beschreibung !! Preis !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| O5 || N30, D=10mm/6mm, H=4.5mm, AL=1760nH || 1,50 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=RIK+10 RIK 10] ||style="color:#888"| 1 ||style="color:#888"| 0,71 EUR ||style="color:#888"| 0,710 EUR<br />
|}<br />
<br />
===Dioden===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Art !! Typ !! Package !! Preis !! Links !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| G0 || Schaltdiode || 1N4148 || DO-35 || 0,05 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_842a3a0c6722907b7528f7d3ef9458ca.html Datasheet] ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=1N4148FS-ND 1N4148FS-ND] ||style="color:#888"| 100 ||style="color:#888"| 2,004 EUR ||style="color:#888"| 0,020 EUR<br />
|- style="background:#ccc;"<br />
| || || || || || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=11000 11000] ||style="color:#888"| 1 ||style="color:#888"| 0,0168 EUR ||style="color:#888"| 0,017 EUR<br />
|- <br />
| G1 || Gleichrichtdiode || 1N4007 || DO-41 || 0,05 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_72d8f510cfa52bef13cc55f2c9e7789b.html Datasheet] ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=1N4007-TPMSCT-ND 1N4007-TPMSCT-ND] ||style="color:#888"| 10 ||style="color:#888"| 0,384 EUR ||style="color:#888"| 0,038 EUR<br />
|- <br />
| || || || || || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=11004 11004] ||style="color:#888"| 1 ||style="color:#888"| 0,0168 EUR ||style="color:#888"| 0,017 EUR<br />
|- style="background:#ccc;"<br />
| G2 || Schottky Diode || BAT48 || DO-35 || 0,30 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_2b2e79e4693c857e026155f2cb0de3bc.html Datasheet] ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=251-3053 251-3053] ||style="color:#888"| 10 ||style="color:#888"| 2,292 EUR ||style="color:#888"| 0,229 EUR<br />
|- style="background:#ccc;"<br />
| || || || || || ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=BAT+48 BAT 48] ||style="color:#888"| 1 ||style="color:#888"| 0,15 EUR ||style="color:#888"| 0,150 EUR<br />
|- <br />
| F0 || Leistung Schottky Diode || SB360 || DO-201AD || 0,30 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_52380fc37fa75b6d0161c586a0a1f2ef.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=SB+360 SB 360] ||style="color:#888"| 1 ||style="color:#888"| 0,14 EUR ||style="color:#888"| 0,140 EUR<br />
|- style="background:#ccc;"<br />
| G3 || Z-Diode 5,1 V || BZX85-C5V1 || DO-41 || 0,20 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_927e2858f43870a51e53dbc38facb241.html Datasheet] ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=812-392 812-392] ||style="color:#888"| 5 ||style="color:#888"| 0,708 EUR ||style="color:#888"| 0,142 EUR<br />
|- <br />
| F1 || Z-Diode 3,6 V || BZX85-C3V6 || DO-41 || 0,20 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_2a178b5907fe517d8bf742bb162c7b93.html Datasheet] ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=812-358 812-358] ||style="color:#888"| 5 ||style="color:#888"| 0,708 EUR ||style="color:#888"| 0,142 EUR<br />
|- style="background:#ccc;"<br />
| J7 || Z-Diode 3,6 V / 0,5W || --- || DO-35 || 0,10 EUR || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=1154 1154] ||style="color:#888"| 1 ||style="color:#888"| 0,03 EUR ||style="color:#888"| 0,030 EUR<br />
|}<br />
<br />
===LEDs===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Farbe !! Bauform, Typ !! Preis !! Links !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| H4 || Rot || T-1 3/4 (5mm) || 0,10 EUR || ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=160-1087-ND 160-1087-ND] ||style="color:#888"| 10 ||style="color:#888"| 0,648 EUR ||style="color:#888"| 0,065 EUR<br />
|- style="background:#ccc;"<br />
| || || || || ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=LED+5MM+RT LED 5MM RT] ||style="color:#888"| 1 ||style="color:#888"| 0,06 EUR ||style="color:#888"| 0,060 EUR<br />
|- <br />
| G4 || Gruen || T-1 3/4 (5mm) || 0,10 EUR || ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=160-1089-ND 160-1089-ND] ||style="color:#888"| 10 ||style="color:#888"| 0,648 EUR ||style="color:#888"| 0,065 EUR<br />
|- <br />
| || || || || ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=LED+5MM+GN LED 5MM GN] ||style="color:#888"| 1 ||style="color:#888"| 0,07 EUR ||style="color:#888"| 0,070 EUR<br />
|- style="background:#ccc;"<br />
| I4 || IR 880nm || T-1 3/4, SHF485 || 1,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_968c71a634023d270147aaef3a9016e4.html Datasheet] ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=585-242 585-242] ||style="color:#888"| 1 ||style="color:#888"| 0,612 EUR ||style="color:#888"| 0,612 EUR<br />
|- <br />
| 19 || RGB || T-1 3/4 (5mm) || 1,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_bf05afa264a8ea3fe16d1b791cc89cbc.html Datasheet] ||style="color:#E45712"| CSD ||style="color:#E45712"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=25-5RGB509 25-5RGB509] ||style="color:#E45712"| 1 ||style="color:#E45712"| 0,95 EUR ||style="color:#E45712"| 0,950 EUR<br />
|}<br />
<div align="right"><small>Orangene Eintraege sind zur Nachbestellung vorgemerkt.</small></div><br />
<br />
===Optische Sensoren===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Typ !! Art !! Beschreibung !! Preis !! Links !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| L1 || SFH203 || Photo-Diode || T-1 3/4, 400-1100nm (880nm) || 1,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_f8807f6642fbada1fde46817f0882124.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=SFH+203 SFH 203] ||style="color:#888"| 1 ||style="color:#888"| 0,53 EUR ||style="color:#888"| 0,530 EUR<br />
|- <br />
| L2 || SFH309 || Photo-Transitor || T-1 3/4, 380-1180nm (880nm) || 1,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_e69341b59f3c829ab7336b6ccc7dbb28.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=SFH+309 SFH 309] ||style="color:#888"| 1 ||style="color:#888"| 0,30 EUR ||style="color:#888"| 0,300 EUR<br />
|- style="background:#ccc;"<br />
| L6 || A906009 || Photo-Widerstand || || 1,00 EUR || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=20834 20834] ||style="color:#888"| 1 ||style="color:#888"| 0,59 EUR ||style="color:#888"| 0,590 EUR<br />
|- <br />
| L7 || TSOP1736 || IR-Empfaenger || IR-Empfangsmodul 36kHz || 1,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_c270180d65055cebc26d49a51fae1ca6.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=TSOP+1736 TSOP 1736] ||style="color:#888"| 1 ||style="color:#888"| 0,62 EUR ||style="color:#888"| 0,620 EUR<br />
|}<br />
<br />
===Transistoren===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Art !! Typ !! Bauform !! Preis !! Links !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| H0 || NPN Transistor || BC547B || TO-92 || 0,20 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_a4432307a5f4e3dc9ef8c3a9c81a9440.html Datasheet] ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=BC547-ND BC547-ND] ||style="color:#888"| 25 ||style="color:#888"| 3,564 EUR ||style="color:#888"| 0,143 EUR<br />
|- style="background:#ccc;"<br />
| || || || || || ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=BC+547B BC 547B] ||style="color:#888"| 1 ||style="color:#888"| 0,04 EUR ||style="color:#888"| 0,040 EUR<br />
|- style="background:#ccc;"<br />
| || || || || || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=13513 13513] ||style="color:#888"| 1 ||style="color:#888"| 0,0336 EUR ||style="color:#888"| 0,034 EUR<br />
|- <br />
| H1 || PNP Transistor || BC557B || TO-92 || 0,30 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_63ff076584efa6cbd5ff6e997095eaa1.html Datasheet] ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=BC557-ND BC557-ND] ||style="color:#888"| 25 ||style="color:#888"| 4,596 EUR ||style="color:#888"| 0,184 EUR<br />
|- <br />
| || || || || || ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=BC+557B BC 557B] ||style="color:#888"| 1 ||style="color:#888"| 0,04 EUR ||style="color:#888"| 0,040 EUR<br />
|- <br />
| || || || || || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=13517 13517] ||style="color:#888"| 1 ||style="color:#888"| 0,0336 EUR ||style="color:#888"| 0,034 EUR<br />
|- style="background:#ccc;"<br />
| H2 || NPN Transistor || 2N3055 || TO-3 || 1,50 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_e205396af66edbab89a0b3821ca54296.html Datasheet] ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=497-2612-5-ND 497-2612-5-ND] ||style="color:#888"| 10 ||style="color:#888"| 11,640 EUR ||style="color:#888"| 1,164 EUR<br />
|- <br />
| P5 || NPN Transistor || 2N2222 || TO-18 || 0,50 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_c484a2d577f40b67eb80b24e6ca00077.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=2N+2222 2N 2222] ||style="color:#888"| 1 ||style="color:#888"| 0,34 EUR ||style="color:#888"| 0,340 EUR<br />
|- style="background:#ccc;"<br />
| Q5 || PNP Transistor || 2N2907 || TO-18 || 0,50 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_dca01f713ed2bb1f2441f424546950bf.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=2N+2907 2N 2907] ||style="color:#888"| 1 ||style="color:#888"| 0,26 EUR ||style="color:#888"| 0,260 EUR<br />
|- <br />
| P6 || NPN Transistor || 2N6488 || TO-220 || 1,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_20f0aa6186f11bb81c36dc0cd87eca73.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=2N+6488 2N 6488] ||style="color:#888"| 1 ||style="color:#888"| 0,48 EUR ||style="color:#888"| 0,480 EUR<br />
|- style="background:#ccc;"<br />
| Q6 || PNP Transistor || 2N6491 || TO-220 || 1,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_6eef6f58a11a7319d310359fdbd1d6f8.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=2N+6491 2N 6491] ||style="color:#888"| 1 ||style="color:#888"| 0,44 EUR ||style="color:#888"| 0,440 EUR<br />
|- <br />
| P7 || N-Kanal MOSFET || BS170 || TO-92 || 0,30 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_570ff8c5a16203a822de32b2b4f5c848.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=BS+170 BS 170] ||style="color:#888"| 1 ||style="color:#888"| 0,13 EUR ||style="color:#888"| 0,130 EUR<br />
|- style="background:#ccc;"<br />
| Q7 || P-Kanal MOSFET || BS250 || TO-92 || 0,50 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_f01c39b23cb9717f664f1717ab57031d.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=BS+250 BS 250] ||style="color:#888"| 1 ||style="color:#888"| 0,32 EUR ||style="color:#888"| 0,320 EUR<br />
|- <br />
| P8 || N-Kanal JFET || 2N3819 || TO-92 || 0,30 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_7364ee8a3bd4ca95a7770fcea1f190ad.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=2N+3819 2N 3819] ||style="color:#888"| 1 ||style="color:#888"| 0,15 EUR ||style="color:#888"| 0,150 EUR<br />
|- style="background:#ccc;"<br />
| Q8 || P-Kanal JFET || 2N3820 || TO-92 || 0,30 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_72159cf91bcf9950a0a4b121b3ade9b8.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=2N+3820 2N 3820] ||style="color:#888"| 1 ||style="color:#888"| 0,17 EUR ||style="color:#888"| 0,170 EUR<br />
|- <br />
| I3 || N-Kanal MOSFET || IRL2703 || TO-220 || 1,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_f21b5eb634eecfe9fbaee12e10639c02.html Datasheet] ||style="color:#E45712"| RS ||style="color:#E45712"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=541-2177 541-2177] ||style="color:#E45712"| 1 ||style="color:#E45712"| 0,864 EUR ||style="color:#E45712"| 0,864 EUR<br />
|- style="background:#ccc;"<br />
| M5 || PUT || 2N6027 || TO-92 || 1,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_c917e108f751180d4e8fef4c55bd54ab.html Datasheet] ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=541-2177 541-2177] ||style="color:#888"| 25x1 ||style="color:#888"| 0,456 EUR ||style="color:#888"| 0,456 EUR<br />
|- style="background:#ccc;"<br />
| || || || || || ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=2N+6027 2N 6027] ||style="color:#888"| 1 ||style="color:#888"| 0,23 EUR ||style="color:#888"| 0,230 EUR<br />
|}<br />
<div align="right"><small>Orangene Eintraege sind zur Nachbestellung vorgemerkt.</small></div><br />
<br />
===Spannungsregler===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Typ !! U-Ausgang !! U-Eingang !! max. Strom !! Bauform !! Preis !! Links !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| I0 || LM317 || 1,2 V bis 37 V || 3 V bis 40 V || 1500 mA || TO-220 || 0,50 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_e12ad8035126151619b081d44e99ad49.html Datasheet] ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=LM317TFS-ND LM317TFS-ND] ||style="color:#888"| 25 ||style="color:#888"| 7,932 EUR ||style="color:#888"| 0,317 EUR<br />
|- <br />
| I1 || LM337 || -1,2 V bis -37 V || -3 V bis -40 V || 1500 mA || TO-220 || 1,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_c0a4dd3765098655ab9e0f461f5388ad.html Datasheet] ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=LM337TFS-ND LM337TFS-ND] ||style="color:#888"| 1 ||style="color:#888"| 0,528 EUR ||style="color:#888"| 0,528 EUR<br />
|- style="background:#ccc;"<br />
| G5 || LF33CV || 3.3 V || max. 16 V || 500 mA || TO-220 || 1,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_28815ccfdcdd0faa5bee6ecf9916bc7a.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=LF+33+CV LF 33 CV] ||style="color:#888"| 1 ||style="color:#888"| 0,57 EUR ||style="color:#888"| 0,570 EUR<br />
|- <br />
| G6 || LF50CV || 5 V || max. 16 V || 500 mA || TO-220 || 1,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_89acd2d22eab406f0cd21b8db794f263.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=LF+50+CV LF 50 CV] ||style="color:#888"| 1 ||style="color:#888"| 0,66 EUR ||style="color:#888"| 0,660 EUR<br />
|}<br />
<br />
===Kuehlkoerper===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
Benoetigtes Montagematerial (Schrauben und Muttern) ebenfalls kaufen und in<br />
der selben Lade aufbewahren.<br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Bauform !! R_th !! Bezeichnung !! Preis !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| K9 || TO-220 || 9,9 K/W || ALUTRONIC FI 356/23 || 1,00 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=V+FI356 V FI356] ||style="color:#888"| 1 ||style="color:#888"| 0,55 EUR ||style="color:#888"| 0,550 EUR<br />
|}<br />
<br />
===Diverse ICs===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Typ !! Beschreibung !! Bauform !! Preis !! Links !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| J0 || LM358 || Dual-OpAmp || 8-DIP || 0,50 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_2fb225b92ea5c408fec32e6b24676cd5.html Datasheet] ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=LM358NFS-ND LM358NFS-ND] ||style="color:#888"| 25 ||style="color:#888"| 7,440 EUR ||style="color:#888"| 0,298 EUR<br />
|- style="background:#ccc;"<br />
| || || || || || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=LM358N+DIP LM358N DIP] ||style="color:#888"| 1 ||style="color:#888"| 0,09 EUR ||style="color:#888"| 0,090 EUR<br />
|- <br />
| H3 || TS912 || CMOS Dual-OpAmp || 8-DIP || 2,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_ff0e2f1a3ea91c1127901a0b110c0c31.html Datasheet] ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=298-8249 298-8249] ||style="color:#888"| 1 ||style="color:#888"| 1,560 EUR ||style="color:#888"| 1,560 EUR<br />
|- <br />
| || || || || || ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=TS+912IN TS 912IN] ||style="color:#888"| 1 ||style="color:#888"| 1,05 EUR ||style="color:#888"| 1,050 EUR<br />
|- style="background:#ccc;"<br />
| R7 || NE5532 || Dual Low Noise OpAmp || 8-DIP || 0,50 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_6614fa2982348d52c0218a990b585d4f.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=NE+5532+DIP NE 5532 DIP] ||style="color:#888"| 1 ||style="color:#888"| 0,30 EUR ||style="color:#888"| 0,300 EUR<br />
|- <br />
| M7 || MCP 6002 || Low Power Dual OpAmp || 8-DIP || 1,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_46f92c9c01e5a80270b024ab79fdbfee.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=MCP+6002-I/P MCP 6002-I/P] ||style="color:#888"| 1 ||style="color:#888"| 0,33 EUR ||style="color:#888"| 0,330 EUR<br />
|- style="background:#ccc;"<br />
| R8 || LM386 || Low Voltage Audio Power Amp || 8-DIP || 0,50 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_2eaeacd2434f13b7c8cf56df0a5585af.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=LM+386+DIP LM 386 DIP] ||style="color:#888"| 1 ||style="color:#888"| 0,34 EUR ||style="color:#888"| 0,340 EUR<br />
|- <br />
| R5 || LM13700 || Transkonduktanzverstaerker || 16-DIP || 2,50 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_40dcf80433c9bc4cac12dc2b1ccadca2.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=LM+13700+DIL LM 13700 DIL] ||style="color:#888"| 1 ||style="color:#888"| 1,25 EUR ||style="color:#888"| 1,250 EUR<br />
|- style="background:#ccc;"<br />
| O7 || MC1496 || Modulator/Demodulator || 14-DIP || 1,50 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_d49858fce46d0968057198a7ba3f877f.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=MC+1496+DIL MC 1496 DIL] ||style="color:#888"| 1 ||style="color:#888"| 0,69 EUR ||style="color:#888"| 0,690 EUR<br />
|- <br />
| O8 || AD633 || Analogmultiplizierer || 8-DIP || 10,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_d071cd30778bc7c0032212cb4b6b0c57.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=AD+633+JN AD 633 JN] ||style="color:#888"| 1 ||style="color:#888"| 7,70 EUR ||style="color:#888"| 7,700 EUR<br />
|- style="background:#ccc;"<br />
| N6 || MCP41050-I/P || Digital-Potentiometer || 8-DIP || 2,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_6fbf790a225534f7385b2d543728749e.html Datasheet] ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=669-6360 669-6360] ||style="color:#888"| 25 ||style="color:#888"| 1,577 EUR ||style="color:#888"| 0,063 EUR<br />
|- <br />
| O6 || TC4469 || Quad MOSFET Treiber || 14-DIP || 3,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_675b5f507d7aaf0d563b57ea5f99fa3e.html Datasheet] ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=TC4469CPD-ND TC4469CPD-ND] ||style="color:#888"| 25 ||style="color:#888"| 53,844 EUR ||style="color:#888"| 2,154 EUR<br />
|- style="background:#ccc;"<br />
| P9 || MCP23017 || I2C I/O Expander || 28-DIP || 2,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_89384993c1aa4864404414a7eb20f363.html Datasheet] ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=MCP23017-E/SP-ND MCP23017-E/SP-ND] ||style="color:#888"| 25 ||style="color:#888"| 25,284 EUR ||style="color:#888"| 1,011 EUR<br />
|- <br />
| Q9 || MCP23S17 || SPI I/O Expander || 28-DIP || 2,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_89384993c1aa4864404414a7eb20f363.html Datasheet] ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=MCP23S17-E/SP-ND MCP23S17-E/SP-ND] ||style="color:#888"| 25 ||style="color:#888"| 26,544 EUR ||style="color:#888"| 1,062 EUR<br />
|- style="background:#ccc;"<br />
| 16 || NE555 || TTL Timer || 8-DIP || 0,50 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_dbfbfa2b747dd3885ce465897f0538c4.html Datasheet] ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=21315 21315] ||style="color:#888"| 1 ||style="color:#888"| 0,12 EUR ||style="color:#888"| 0,120 EUR<br />
|- <br />
| J1 || ICM7555 || CMOS Timer || 8-DIP || 0,50 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_d3c64c09d74685644bfd75adf9e875cd.html Datasheet] ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=568-1821-5-ND 568-1821-5-ND] ||style="color:#888"| 25 ||style="color:#888"| 7,932 EUR ||style="color:#888"| 0,317 EUR<br />
|- style="background:#ccc;"<br />
| J2 || CNY17-3 || Optokoppler || 6-DIP || 0,20 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_fbecd240d8f4015bf2b9c4f9dd914e55.html Datasheet] ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=160-1312-5-ND 160-1312-5-ND] ||style="color:#888"| 10 ||style="color:#888"| 2,016 EUR ||style="color:#888"| 0,202 EUR<br />
|- <br />
| J3 || MAX232 || Dual EIA-232 to 5V Transceiver || 16-DIP || 1,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_adb61205d65340a6c4960017d0c65615.html Datasheet] ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=296-1402-5-ND 296-1402-5-ND] ||style="color:#888"| 1 ||style="color:#888"| 0,732 EUR ||style="color:#888"| 0,732 EUR<br />
|- style="background:#ccc;"<br />
| J4 || 40109 || Quad Voltage Shifter 3-20 V || 16-DIP || 0,50 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_59e7b300a798b781aa6ba5b84343ce6b.html Datasheet] ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=CD40109BEE4-ND CD40109BEE4-ND] ||style="color:#888"| 25 ||style="color:#888"| 12,480 EUR ||style="color:#888"| 0,499 EUR<br />
|- style="background:#ccc;"<br />
| || || || || || ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=MOS+40109 MOS 40109] ||style="color:#888"| 1 ||style="color:#888"| 0,22 EUR ||style="color:#888"| 0,220 EUR<br />
|- <br />
| K4 || 40106 || Hex Schmitt Trigger || 14-DIP || 0,50 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_5c969ccc648e0666572c7d825c732c62.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=MOS+40106 MOS 40106] ||style="color:#888"| 1 ||style="color:#888"| 0,12 EUR ||style="color:#888"| 0,120 EUR<br />
|- style="background:#ccc;"<br />
| I2 || MC34063A || DC-to-DC Control Circuit || 8-DIP || 0,50 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_34745c6669974393f8da3a4ac6d800b2.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=MC34063A MC34063A] ||style="color:#888"| 1 ||style="color:#888"| 0,20 EUR ||style="color:#888"| 0,200 EUR<br />
|- <br />
| K0 || 4011 || Quad 2-Input NAND || 14-DIP || 0,50 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_2ce72e4fb1e33171884ce98d995b1672.html Datasheet] ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=CD4011BCN-ND CD4011BCN-ND] ||style="color:#888"| 25 ||style="color:#888"| 8,808 EUR ||style="color:#888"| 0,352 EUR<br />
|- <br />
| || || || || || ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=MOS+4011 MOS 4011] ||style="color:#888"| 1 ||style="color:#888"| 0,12 EUR ||style="color:#888"| 0,120 EUR<br />
|- style="background:#ccc;"<br />
| K1 || 4016 || Quad Analog Switch || 14-DIP || 0,50 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_26f061db14011cb2d470f682bd03cb49.html Datasheet] ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=CD4016BCN-ND CD4016BCN-ND] ||style="color:#888"| 25 ||style="color:#888"| 8,808 EUR ||style="color:#888"| 0,352 EUR<br />
|- style="background:#ccc;"<br />
| || || || || || ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=MOS+4016 MOS 4016] ||style="color:#888"| 1 ||style="color:#888"| 0,16 EUR ||style="color:#888"| 0,160 EUR<br />
|- <br />
| K2 || 4021 || 8-Bit Shift Register PISO Async || 16-DIP || 0,50 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_698e7d8ca1fd4c15ea4cd7a314761155.html Datasheet] ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=CD4021BEE4-ND CD4021BEE4-ND] ||style="color:#888"| 25 ||style="color:#888"| 7,488 EUR ||style="color:#888"| 0,300 EUR<br />
|- <br />
| || || || || || ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=MOS+4021 MOS 4021] ||style="color:#888"| 1 ||style="color:#888"| 0,14 EUR ||style="color:#888"| 0,140 EUR<br />
|- style="background:#ccc;"<br />
| K3 || 4094 || 8-Bit Shift Register SIPO Async || 16-DIP || 0,50 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_2a4a6769c60ef9749bce67cce69f5a35.html Datasheet] ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=CD4094BEE4-ND CD4094BEE4-ND] ||style="color:#888"| 25 ||style="color:#888"| 8,112 EUR ||style="color:#888"| 0,324 EUR<br />
|- style="background:#ccc;"<br />
| || || || || || ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=MOS+4094 MOS 4094] ||style="color:#888"| 1 ||style="color:#888"| 0,16 EUR ||style="color:#888"| 0,160 EUR<br />
|- <br />
| S5 || 4046 || VCO und Phase Locked Loop || 16-DIP || 0,50 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_dd48084dcf56af67fefee2533cfef3ce.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=MOS+4046 MOS 4046] ||style="color:#888"| 1 ||style="color:#888"| 0,24 EUR ||style="color:#888"| 0,240 EUR<br />
|- style="background:#ccc;"<br />
| S6 || 4067 || 16-Channel Analog Mux/Demux || 24-DIP || 1,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_f52ee909bc649e56e7f990b2d064583b.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=MOS+4067 MOS 4067] ||style="color:#888"| 1 ||style="color:#888"| 0,45 EUR ||style="color:#888"| 0,450 EUR<br />
|- <br />
| K5 || FT232BL || USB RS232/RS422/RS485 Interface || LQFP-32 || 5,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_fc746c63abf4f90cf69d7ffca08b11a9.html Datasheet] ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=FT232BL FT232BL] ||style="color:#888"| 1 ||style="color:#888"| 3,59 EUR ||style="color:#888"| 3,590 EUR<br />
|- style="background:#ccc;"<br />
| G8 || SN74LVC1G97 || Configurable Multiple-Function Gate || SOT-23 || 0,20 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_4737077974535b673bb8c39612197167.html Datasheet] ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=296-15581-6-ND 296-15581-6-ND] ||style="color:#888"| 500x1 ||style="color:#888"| 0,156 EUR ||style="color:#888"| 0,156 EUR<br />
|- <br />
| G9 || SN74LVC1G79 || Positive-Edge-Triggered D-Type Flip-Flop || SOT-23 || 0,20 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_97b716a69f18597b68996471e20fd641.html Datasheet] ||style="color:#888"| DigiKey ||style="color:#888"| [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=296-9849-6-ND 296-9849-6-ND] ||style="color:#888"| 500x1 ||style="color:#888"| 0,156 EUR ||style="color:#888"| 0,156 EUR<br />
|}<br />
<br />
===Arduino===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Beschreibung !! Preis !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| T8.1 || Arduino || 30,00 EUR ||style="color:#E45712"| SmartPrj ||style="color:#E45712"| [http://www.smartprj.com/ Arduino] ||style="color:#E45712"| 10x1 ||style="color:#E45712"| 24,000 EUR ||style="color:#E45712"| 24,000 EUR<br />
|- <br />
| T8.2 || Arduino Shield Proto || 6,00 EUR ||style="color:#888"| SmartPrj ||style="color:#888"| [http://www.smartprj.com/ Shield - Proto] ||style="color:#888"| 10x1 ||style="color:#888"| 4,800 EUR ||style="color:#888"| 4,800 EUR<br />
|- <br />
| || || ||style="color:#888"| SmartPrj ||style="color:#888"| [http://www.smartprj.com/ Shield - Proto] ||style="color:#888"| 100x1 ||style="color:#888"| 3,600 EUR ||style="color:#888"| 3,600 EUR<br />
|}<br />
<div align="right"><small>Orangene Eintraege sind zur Nachbestellung vorgemerkt.</small></div><br />
<br />
===Baugruppen===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Typ !! Beschreibung !! Preis !! Links !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| K8 || RFM12 || 868 MHz Funk-Transceiver Modul || 6,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_647a2fa8f4e97af8dc853299dc010412.html Datasheet], [http://svn.clifford.at/metaparts/trunk/datasheets/DS_3184f33e919bfe9e9d77075edf5c238c.html Prog. Guide] ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=304091 304091] ||style="color:#888"| 1 ||style="color:#888"| 3,95 EUR ||style="color:#888"| 3,950 EUR<br />
|- <br />
| T1 || DEM 16216 SGH || 16x2 LCD-Punkt-Matrix || 11,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_d22fbd612890c4e583c27a3422c2d50a.html Datasheet] ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=32-1602-1 32-1602-1] ||style="color:#888"| 1 ||style="color:#888"| 7,99 EUR ||style="color:#888"| 7,990 EUR<br />
|- style="background:#ccc;"<br />
| J8 || DC-ME-Y402-LX || Digi Connect ME 9210 (Linux) || 50,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_98ec0e495424018728909ca07e22fe71.html Module-Ref], [http://svn.clifford.at/metaparts/trunk/datasheets/DS_c172899f078329fcb67cf9bd06a9b98a.html CPU-Ref] ||style="color:#888"| Digi ||style="color:#888"| DC-ME-Y402-LX ||style="color:#888"| 1 ||style="color:#888"| 42,00 EUR ||style="color:#888"| 42,000 EUR<br />
|- <br />
| S7 || EPM 121 || Piezo-Schallwandler || 1,00 EUR || ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=SUMMER+EPM+121 SUMMER EPM 121] ||style="color:#888"| 1 ||style="color:#888"| 0,70 EUR ||style="color:#888"| 0,700 EUR<br />
|- style="background:#ccc;"<br />
| 17 || 064-LSP40 || Lautsprecher || 1,00 EUR || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=064-LSP40 064-LSP40] ||style="color:#888"| 1 ||style="color:#888"| 0,59 EUR ||style="color:#888"| 0,590 EUR<br />
|- <br />
| 18 || 064-MIC01 || Elektret-Kond.-Mikrofon || 1,00 EUR || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=064-MIC01 064-MIC01] ||style="color:#888"| 1 ||style="color:#888"| 0,35 EUR ||style="color:#888"| 0,350 EUR<br />
|- style="background:#ccc;"<br />
| R6 || M4 05 H || DIL Miniatur-Signalrelais || 2,00 EUR || ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=M4+05H M4 05H] ||style="color:#888"| 1 ||style="color:#888"| 0,92 EUR ||style="color:#888"| 0,920 EUR<br />
|- <br />
| M6 || FIN 40.31.9 6V || Printrelais, 250V/10A || 5,00 EUR || ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=FIN+40.31.9+6V FIN 40.31.9 6V] ||style="color:#888"| 1 ||style="color:#888"| 2,15 EUR ||style="color:#888"| 2,150 EUR<br />
|}<br />
<br />
===Mikrocontroller===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Typ !! Bauform !! Preis !! Links !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| L3 || AVR ATTiny45 || 8-DIP || 3,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_5bdca6f62bce5ecc37dd77fbb72cc51e.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=ATTINY+45-20PU ATTINY 45-20PU] ||style="color:#888"| 1 ||style="color:#888"| 1,85 EUR ||style="color:#888"| 1,850 EUR<br />
|- <br />
| L4 || AVR ATMega168 || 28-DIP || 5,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_cbf8a83722629a0dfb2829ad8962d0af.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=ATMEGA+168-20DIP ATMEGA 168-20DIP] ||style="color:#888"| 1 ||style="color:#888"| 2,85 EUR ||style="color:#888"| 2,850 EUR<br />
|- style="background:#ccc;"<br />
| K6 || CY8C29466-24PXI || 28-DIP || 7,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_52487f73f8ed44aa3b244a200bfe68f5.html Datasheet] ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=390-794 390-794] ||style="color:#888"| 11x1 ||style="color:#888"| 6,024 EUR ||style="color:#888"| 6,024 EUR<br />
|}<br />
<br />
===Programmierbare Logik===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Art !! Typ !! Preis !! Links !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| K7 || GAL || GAL16V8D-15QP || 2,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_66615e8d5071c09274ef39758bf9273f.html Datasheet] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=GAL+16V8-15QP GAL 16V8-15QP] ||style="color:#888"| 1 ||style="color:#888"| 0,95 EUR ||style="color:#888"| 0,950 EUR<br />
|- <br />
| L8 || CPLD || XC9536XL VQ44 || 3,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_38112a6fc681ade74ebb361934c5d752.html Datasheet], [http://svn.clifford.at/metaparts/trunk/datasheets/DS_3080f0f0ad7e1ae865628f6607b502e6.html Package] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=XC+9536XL+VQ44 XC 9536XL VQ44] ||style="color:#888"| 1 ||style="color:#888"| 1,55 EUR ||style="color:#888"| 1,550 EUR<br />
|- style="background:#ccc;"<br />
| L9 || FPGA || XC3S50 VQ100 || 15,00 EUR || [http://svn.clifford.at/metaparts/trunk/datasheets/DS_270342ca55573e332b5d6a4d4bbe7617.html Datasheet], [http://svn.clifford.at/metaparts/trunk/datasheets/DS_56989204fc4cc335ce03188526ccfd9e.html Package] ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=XC3S+50+VQ100 XC3S 50 VQ100] ||style="color:#888"| 1 ||style="color:#888"| 10,70 EUR ||style="color:#888"| 10,700 EUR<br />
|}<br />
<br />
===Quarze===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Frequenz !! Bauform !! Preis !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| J5 || 20 MHz || HC49US || 0,50 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=14-US20,000MHZ 14-US20,000MHZ] ||style="color:#888"| 1 ||style="color:#888"| 0,25 EUR ||style="color:#888"| 0,250 EUR<br />
|- <br />
| J6 || 18,432 MHz || HC49US || 0,50 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=14-US18,4320MHZ 14-US18,4320MHZ] ||style="color:#888"| 1 ||style="color:#888"| 0,35 EUR ||style="color:#888"| 0,350 EUR<br />
|- style="background:#ccc;"<br />
| L0 || 16 MHz || HC49US || 0,50 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=14-US16,000MHZ 14-US16,000MHZ] ||style="color:#888"| 1 ||style="color:#888"| 0,25 EUR ||style="color:#888"| 0,250 EUR<br />
|- <br />
| L5 || 6 MHz || HC49US || 0,50 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=14-US06,000MHZ 14-US06,000MHZ] ||style="color:#888"| 1 ||style="color:#888"| 0,40 EUR ||style="color:#888"| 0,400 EUR<br />
|}<br />
<br />
===Stecker und Buechsen===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Beschreibung !! Preis !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| A5 || SUB-D 9 Pol Buchse Loetkelch || 0,50 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=5214 5214] ||style="color:#888"| 1 ||style="color:#888"| 0,18 EUR ||style="color:#888"| 0,180 EUR<br />
|- style="background:#ccc;"<br />
| || || ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=D-SUB+BU+09 D-SUB BU 09] ||style="color:#888"| 1 ||style="color:#888"| 0,10 EUR ||style="color:#888"| 0,100 EUR<br />
|- <br />
| A6 || SUB-D 9 Pol Stecker Loetkelch || 0,50 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=5215 5215] ||style="color:#888"| 1 ||style="color:#888"| 0,18 EUR ||style="color:#888"| 0,180 EUR<br />
|- <br />
| || || ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=D-SUB+ST+09 D-SUB ST 09] ||style="color:#888"| 1 ||style="color:#888"| 0,09 EUR ||style="color:#888"| 0,090 EUR<br />
|- style="background:#ccc;"<br />
| A7 || SUB-D 25 Pol Buchse Loetkelch || 0,50 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=5217 5217] ||style="color:#888"| 1 ||style="color:#888"| 0,16 EUR ||style="color:#888"| 0,160 EUR<br />
|- style="background:#ccc;"<br />
| || || ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=D-SUB+BU+25 D-SUB BU 25] ||style="color:#888"| 1 ||style="color:#888"| 0,15 EUR ||style="color:#888"| 0,150 EUR<br />
|- <br />
| A8 || SUB-D 25 Pol Stecker Loetkelch || 0,50 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=D-SUB+ST+25 D-SUB ST 25] ||style="color:#888"| 1 ||style="color:#888"| 0,10 EUR ||style="color:#888"| 0,100 EUR<br />
|- style="background:#ccc;"<br />
| A9 || USB Buchse Typ B || 0,50 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=1575 1575] ||style="color:#888"| 1 ||style="color:#888"| 0,29 EUR ||style="color:#888"| 0,290 EUR<br />
|- <br />
| B5 || Jumper RM 2,54 || 0,10 EUR ||style="color:#E45712"| CSD ||style="color:#E45712"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=015491 015491] ||style="color:#E45712"| 1 ||style="color:#E45712"| 0,04 EUR ||style="color:#E45712"| 0,040 EUR<br />
|- style="background:#ccc;"<br />
| B6 || Stiftleiste 40 Pol Winkel || 0,50 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=SL+1X40W+2,54 SL 1X40W 2,54] ||style="color:#888"| 1 ||style="color:#888"| 0,30 EUR ||style="color:#888"| 0,300 EUR<br />
|- style="background:#ccc;"<br />
| || || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=015471 015471] ||style="color:#888"| 1 ||style="color:#888"| 0,25 EUR ||style="color:#888"| 0,250 EUR<br />
|- <br />
| B7 || Stiftleiste 40 Pol Gerade || 0,50 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=SL+1X40G+2,54 SL 1X40G 2,54] ||style="color:#888"| 1 ||style="color:#888"| 0,18 EUR ||style="color:#888"| 0,180 EUR<br />
|- <br />
| || || ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=015435 015435] ||style="color:#888"| 1 ||style="color:#888"| 0,18 EUR ||style="color:#888"| 0,180 EUR<br />
|- style="background:#ccc;"<br />
| B8 || Buchsenleiste, 10 Pol, RM 2.54, Winkel || 0,50 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=014-B110W 014-B110W] ||style="color:#888"| 1 ||style="color:#888"| 0,29 EUR ||style="color:#888"| 0,290 EUR<br />
|- <br />
| B9 || Buchsenleiste, 10 Pol, RM 2.54, Gerade || 0,50 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=014-B110G 014-B110G] ||style="color:#888"| 1 ||style="color:#888"| 0,16 EUR ||style="color:#888"| 0,160 EUR<br />
|- style="background:#ccc;"<br />
| C5 || Buchsenleiste, 2x16 Pol, RM 2.00, Gerade || 0,50 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=0141-B216G 0141-B216G] ||style="color:#888"| 1 ||style="color:#888"| 0,36 EUR ||style="color:#888"| 0,360 EUR<br />
|- <br />
| T3 || 9V (PP3) Batterieclip || 0,50 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=015-5866 015-5866] ||style="color:#888"| 1 ||style="color:#888"| 0,09 EUR ||style="color:#888"| 0,090 EUR<br />
|- style="background:#ccc;"<br />
| C6 || Bananenstecker 4mm Rot || 0,50 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=015-52001 015-52001] ||style="color:#888"| 1 ||style="color:#888"| 0,20 EUR ||style="color:#888"| 0,200 EUR<br />
|- <br />
| C7 || Bananenstecker 4mm Schwarz || 0,50 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=015-52002 015-52002] ||style="color:#888"| 1 ||style="color:#888"| 0,20 EUR ||style="color:#888"| 0,200 EUR<br />
|- style="background:#ccc;"<br />
| F8 || Hohlstecker 2,1mm || 0,50 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=HS+21-9 HS 21-9] ||style="color:#888"| 1 ||style="color:#888"| 0,13 EUR ||style="color:#888"| 0,130 EUR<br />
|- <br />
| C8 || Kupplung fuer Hohlstecker 2,1mm || 1,00 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=HK+21 HK 21] ||style="color:#888"| 1 ||style="color:#888"| 0,45 EUR ||style="color:#888"| 0,450 EUR<br />
|- style="background:#ccc;"<br />
| C9 || Klinkenkupplung 3,5mm Stereo || 0,50 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=KKS+35 KKS 35] ||style="color:#888"| 1 ||style="color:#888"| 0,16 EUR ||style="color:#888"| 0,160 EUR<br />
|- <br />
| D9 || Praez.-Buchsenleiste 20 Pol || 0,50 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=014-PBL20 014-PBL20] ||style="color:#888"| 1 ||style="color:#888"| 0,32 EUR ||style="color:#888"| 0,320 EUR<br />
|- style="background:#ccc;"<br />
| G7 || Federkontakt-Buchsenleiste 36 Pol || 3,00 EUR ||style="color:#888"| Ribu ||style="color:#888"| 401675 ||style="color:#888"| 1 ||style="color:#888"| 2,39 EUR ||style="color:#888"| 2,390 EUR<br />
|- style="background:#ccc;"<br />
| || || ||style="color:#888"| Ribu ||style="color:#888"| 401675 ||style="color:#888"| 25 ||style="color:#888"| 41,75 EUR ||style="color:#888"| 1,670 EUR<br />
|- <br />
| F6 || Stiftleiste 2x10 Pol RM 1,27 || 2,00 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=SL+2X10G+1,27 SL 2X10G 1,27] ||style="color:#888"| 1 ||style="color:#888"| 1,14 EUR ||style="color:#888"| 1,140 EUR<br />
|- style="background:#ccc;"<br />
| F7 || Buchsenleiste 2x10 Pol RM 1,27 || 2,00 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=BL+2X10G+1,27 BL 2X10G 1,27] ||style="color:#888"| 1 ||style="color:#888"| 1,15 EUR ||style="color:#888"| 1,150 EUR<br />
|- <br />
| F9 || Modular Buchse 8 polig (aka RJ45) || 1,00 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=015-5402 015-5402] ||style="color:#888"| 1 ||style="color:#888"| 0,55 EUR ||style="color:#888"| 0,550 EUR<br />
|- style="background:#ccc;"<br />
| R9 || Arduino Buchsenleisten Sets || 4,00 EUR ||style="color:#888"| Watterott ||style="color:#888"| [http://www.watterott.com/index.php?page=search&keywords=2009848 2009848] ||style="color:#888"| 1 ||style="color:#888"| 2,99 EUR ||style="color:#888"| 2,990 EUR<br />
|- <br />
| O9 || Mini USB Buchse Typ B || 1,00 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=15762 15762] ||style="color:#888"| 1 ||style="color:#888"| 0,60 EUR ||style="color:#888"| 0,600 EUR<br />
|}<br />
<div align="right"><small>Orangene Eintraege sind zur Nachbestellung vorgemerkt.</small></div><br />
<br />
===Schalter und Potis===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Typ !! Beschreibung !! Preis !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| N7 || ALPS RK09K113-LIN10K || Poti 10 kOhm lin || 2,00 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=RK09K113-LIN10K RK09K113-LIN10K] ||style="color:#888"| 1 ||style="color:#888"| 0,90 EUR ||style="color:#888"| 0,900 EUR<br />
|- <br />
| N8 || ALPS RK09K113-LIN100K || Poti 100 kOhm lin || 2,00 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=RK09K113-LIN100K RK09K113-LIN100K] ||style="color:#888"| 1 ||style="color:#888"| 0,90 EUR ||style="color:#888"| 0,900 EUR<br />
|- style="background:#ccc;"<br />
| N9 || ALPS RK09K113-LOG10K || Poti 10 kOhm log || 2,00 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=RK09K113-LOG10K RK09K113-LOG10K] ||style="color:#888"| 1 ||style="color:#888"| 0,90 EUR ||style="color:#888"| 0,900 EUR<br />
|- <br />
| M8 || PIHER 25 kOhm Poti || Poti 25 kOhm lin || 0,50 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=0507 0507] ||style="color:#888"| 1 ||style="color:#888"| 0,19 EUR ||style="color:#888"| 0,190 EUR<br />
|- style="background:#ccc;"<br />
| M9 || PIHER 250 Ohm Poti || Poti 250 Ohm lin || 0,50 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=0501 0501] ||style="color:#888"| 1 ||style="color:#888"| 0,19 EUR ||style="color:#888"| 0,190 EUR<br />
|- <br />
| E5 || Bourns 3386P-1-102LF || Trimmpoti 1 kOhm || 1,00 EUR ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=522-2687 522-2687] ||style="color:#888"| 1 ||style="color:#888"| 0,840 EUR ||style="color:#888"| 0,840 EUR<br />
|- style="background:#ccc;"<br />
| E6 || Bourns 3386P-1-103LF || Trimmpoti 10 kOhm || 1,00 EUR ||style="color:#888"| RS ||style="color:#888"| [http://at.rs-online.com/web/search/searchBrowseAction.html?method=searchProducts&searchTerm=522-2693 522-2693] ||style="color:#888"| 1 ||style="color:#888"| 0,840 EUR ||style="color:#888"| 0,840 EUR<br />
|- <br />
| F5 || Bourns 3296P-1-104LF || Spindeltrimmer 100 kOhm || 1,00 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=05-3296PK100 05-3296PK100] ||style="color:#888"| 1 ||style="color:#888"| 0,45 EUR ||style="color:#888"| 0,450 EUR<br />
|- style="background:#ccc;"<br />
| E7 || Bourns PEC11-4225F-S24 || Drehimpulsgeber || 2,00 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=0615 0615] ||style="color:#888"| 1 ||style="color:#888"| 1,85 EUR ||style="color:#888"| 1,850 EUR<br />
|- <br />
| E8 || 10-DIP || DIP-Schalter 10 Pol || 0,50 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=35-DIP10 35-DIP10] ||style="color:#888"| 1 ||style="color:#888"| 0,45 EUR ||style="color:#888"| 0,450 EUR<br />
|- style="background:#ccc;"<br />
| E9 || Mini-Taster 6,5mm || Taster || 0,20 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=35100 35100] ||style="color:#888"| 1 ||style="color:#888"| 0,15 EUR ||style="color:#888"| 0,150 EUR<br />
|- <br />
| S8 || T-113 A Push Button || Drucktaster || 1,00 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=T+113A+SW T 113A SW] ||style="color:#888"| 1 ||style="color:#888"| 0,51 EUR ||style="color:#888"| 0,510 EUR<br />
|- style="background:#ccc;"<br />
| S9 || MIYAMA MS 245 || Kippschalter || 2,00 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=MS+245 MS 245] ||style="color:#888"| 1 ||style="color:#888"| 1,35 EUR ||style="color:#888"| 1,350 EUR<br />
|- <br />
| T6 || DS 2PC || Drehschalter (2x6) || 2,50 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=DS+2PC DS 2PC] ||style="color:#888"| 1 ||style="color:#888"| 1,65 EUR ||style="color:#888"| 1,650 EUR<br />
|}<br />
<br />
===IC Sockel===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Beschreibung !! Preis !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| D5 || 8-DIP || 0,10 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=15-DIP08LC 15-DIP08LC] ||style="color:#888"| 1 ||style="color:#888"| 0,03 EUR ||style="color:#888"| 0,030 EUR<br />
|- <br />
| D6 || 14-DIP || 0,10 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=15-DIP14LC 15-DIP14LC] ||style="color:#888"| 1 ||style="color:#888"| 0,04 EUR ||style="color:#888"| 0,040 EUR<br />
|- style="background:#ccc;"<br />
| D7 || 16-DIP || 0,10 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=15-DIP16LC 15-DIP16LC] ||style="color:#888"| 1 ||style="color:#888"| 0,04 EUR ||style="color:#888"| 0,040 EUR<br />
|- <br />
| D8 || 28-DIP || 0,15 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=15-DIP28SLC 15-DIP28SLC] ||style="color:#888"| 1 ||style="color:#888"| 0,09 EUR ||style="color:#888"| 0,090 EUR<br />
|}<br />
<br />
===Breadboards===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Beschreibung !! Preis !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| U2.1 || Steckbrett 640/200 Kontakte || 5,00 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=STECKBOARD+1K2V STECKBOARD 1K2V] ||style="color:#888"| 1 ||style="color:#888"| 2,75 EUR ||style="color:#888"| 2,750 EUR<br />
|- <br />
| 86 || Jumper-Wire M/M || 0,10 EUR ||style="color:#888"| Watterott ||style="color:#888"| [http://www.watterott.com/index.php?page=search&keywords=20101189 20101189] ||style="color:#888"| 70 ||style="color:#888"| 6,55 EUR ||style="color:#888"| 0,094 EUR<br />
|- style="background:#ccc;"<br />
| 75 || Jumper-Wire F/F || 0,50 EUR ||style="color:#888"| Watterott ||style="color:#888"| [http://www.watterott.com/index.php?page=search&keywords=2008303 2008303] ||style="color:#888"| 10 ||style="color:#888"| 2,75 EUR ||style="color:#888"| 0,275 EUR<br />
|- <br />
| 76 || Jumper-Wire F/M || 0,50 EUR ||style="color:#888"| Watterott ||style="color:#888"| [http://www.watterott.com/index.php?page=search&keywords=2009739 2009739] ||style="color:#888"| 10 ||style="color:#888"| 2,75 EUR ||style="color:#888"| 0,275 EUR<br />
|}<br />
<br />
===Leiterplatten===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Beschreibung !! Preis !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| U7.1 || Prototype-Board DIP, 160x100mm || 5,00 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=UP+941HP UP 941HP] ||style="color:#888"| 1 ||style="color:#888"| 2,75 EUR ||style="color:#888"| 2,750 EUR<br />
|- <br />
| U7.2 || Lochraster Board, 50x100mm || 1,00 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=H25PR050 H25PR050] ||style="color:#888"| 1 ||style="color:#888"| 0,63 EUR ||style="color:#888"| 0,630 EUR<br />
|- style="background:#ccc;"<br />
| U7.3 || Lochraster Board, 160x100mm || 3,00 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=H25PR160 H25PR160] ||style="color:#888"| 1 ||style="color:#888"| 1,80 EUR ||style="color:#888"| 1,800 EUR<br />
|- <br />
| U7.4 || Beidseitig Fotobeschichtet, 160x100mm || 5,00 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=4383-160 4383-160] ||style="color:#888"| 1 ||style="color:#888"| 2,20 EUR ||style="color:#888"| 2,200 EUR<br />
|- <br />
| || || ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=BEL+160X100-2 BEL 160X100-2] ||style="color:#888"| 1 ||style="color:#888"| 2,15 EUR ||style="color:#888"| 2,150 EUR<br />
|- style="background:#ccc;"<br />
| U7.5 || Einseitig Fotobeschichtet, 160x100mm || 3,00 EUR ||style="color:#888"| CSD ||style="color:#888"| [http://www.csd-electronics.de/200/cgi-bin/shop.dll?AnbieterID=2&bnr=4381-160 4381-160] ||style="color:#888"| 1 ||style="color:#888"| 1,75 EUR ||style="color:#888"| 1,750 EUR<br />
|- style="background:#ccc;"<br />
| || || ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=BEL+160X100-1 BEL 160X100-1] ||style="color:#888"| 1 ||style="color:#888"| 1,65 EUR ||style="color:#888"| 1,650 EUR<br />
|- <br />
| U7.6 || Beidseitig Unbeschichtet, 160x100mm || 2,00 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=EP2CU+160X100 EP2CU 160X100] ||style="color:#888"| 1 ||style="color:#888"| 1,35 EUR ||style="color:#888"| 1,350 EUR<br />
|- style="background:#ccc;"<br />
| U7.7 || Einseitig Unbeschichtet, 160x100mm || 2,00 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=EPCU+160X100 EPCU 160X100] ||style="color:#888"| 1 ||style="color:#888"| 1,35 EUR ||style="color:#888"| 1,350 EUR<br />
|- <br />
| 77 || SMD-Adapter TSOP8/MSOP8 || 0,80 EUR ||style="color:#888"| Futurlec ||style="color:#888"| 8PINSSOP ||style="color:#888"| 1 ||style="color:#888"| 0,45 EUR ||style="color:#888"| 0,450 EUR<br />
|- style="background:#ccc;"<br />
| 78 || SMD-Adapter SOIC8 || 0,50 EUR ||style="color:#888"| Futurlec ||style="color:#888"| 8PINSOIC_TO_DIP8 ||style="color:#888"| 1 ||style="color:#888"| 0,35 EUR ||style="color:#888"| 0,350 EUR<br />
|- <br />
| 79 || SMD-Adapter SOT-23 || 0,30 EUR ||style="color:#888"| Futurlec ||style="color:#888"| 6PINSOT23 ||style="color:#888"| 1 ||style="color:#888"| 0,28 EUR ||style="color:#888"| 0,280 EUR<br />
|}<br />
<br />
===Kabel===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right; width:100%;"<br />
! Fach !! Beschreibung !! Preis !! Lieferant!! Bestell-Nr.!! VPE!! EK-Preis!! EKP/Stk<br />
|- style="background:#ccc;"<br />
| X1 || USB Kabel || 2,00 EUR ||style="color:#888"| Reichelt ||style="color:#888"| [http://such001.reichelt.de/?ACTION=444;SEARCH=AK+672/2-1,0 AK 672/2-1,0] ||style="color:#888"| 1 ||style="color:#888"| 0,55 EUR ||style="color:#888"| 0,550 EUR<br />
|}<br />
<br />
== Kastenplan ==<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
===Kasten 1===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
{| style="border-color:blue; border-style:solid; border-width:2px; font-size:70%; width:100%;"<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>10 Ohm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">M0</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>15 Ohm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">M1</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>22 Ohm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">M2</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>33 Ohm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">M3</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>47 Ohm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">M4</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>68 Ohm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">N0</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>100 Ohm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">N1</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>150 Ohm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">N2</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>220 Ohm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">N3</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>330 Ohm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">N4</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>470 Ohm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">O0</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>680 Ohm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">O1</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>1,0 kOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">O2</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>1,5 kOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">O3</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>2,2 kOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">O4</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>3,3 kOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">P0</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>4,7 kOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">P1</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>6,8 kOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">P2</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>10 kOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">P3</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>15 kOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">P4</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>22 kOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">Q0</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>33 kOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">Q1</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>47 kOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">Q2</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>68 kOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">Q3</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>100 kOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">Q4</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>150 kOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">R0</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>220 kOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">R1</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>330 kOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">R2</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>470 kOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">R3</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>680 kOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">R4</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>1,0 MOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">S0</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>1,5 MOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">S1</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>2,2 MOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">S2</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>3,3 MOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">S3</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>4,7 MOhm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">S4</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:50%;" colspan="5"|<b>DEM 16216 SGH</b><br/>16x2 LCD-Punkt-Matrix<br/><br />
<div style="float:left">T1</div><br />
<div style="float:right">11,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:50%;" colspan="5"|<b>9V (PP3) Batterieclip</b><br/><br/><br />
<div style="float:left">T3</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center;" colspan="10"|<b>Steckbrett 640/200 Kontakte</b><br/><br/><br />
<div style="float:left">U2</div><br />
<div style="float:right">5,00 EUR</div><br />
<br />
|}<br />
<br />
===Kasten 2===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
{| style="border-color:blue; border-style:solid; border-width:2px; font-size:70%; width:100%;"<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>PUT</b><br/>2N6027, TO-92<br/><br />
<div style="float:left">M5</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>FIN 40.31.9 6V</b><br/>Printrelais, 250V/10A<br/><br />
<div style="float:left">M6</div><br />
<div style="float:right">5,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>MCP 6002</b><br/>Low Power Dual OpAmp<br/><br />
<div style="float:left">M7</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Poti 25 kOhm lin</b><br/>PIHER 25 kOhm Poti<br/><br />
<div style="float:left">M8</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Poti 250 Ohm lin</b><br/>PIHER 250 Ohm Poti<br/><br />
<div style="float:left">M9</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>470 uH Indukt</b><br/>max. 2.2 A<br/><br />
<div style="float:left">N5</div><br />
<div style="float:right">8,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>MCP41050-I/P</b><br/>Digital-Potentiometer<br/><br />
<div style="float:left">N6</div><br />
<div style="float:right">2,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Poti 10 kOhm lin</b><br/>ALPS RK09K113-LIN10K<br/><br />
<div style="float:left">N7</div><br />
<div style="float:right">2,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Poti 100 kOhm lin</b><br/>ALPS RK09K113-LIN100K<br/><br />
<div style="float:left">N8</div><br />
<div style="float:right">2,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Poti 10 kOhm log</b><br/>ALPS RK09K113-LOG10K<br/><br />
<div style="float:left">N9</div><br />
<div style="float:right">2,00 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Ringkern</b><br/>N30, D=10mm/6mm, H=4.5mm, AL=1760nH<br/><br />
<div style="float:left">O5</div><br />
<div style="float:right">1,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>TC4469</b><br/>Quad MOSFET Treiber<br/><br />
<div style="float:left">O6</div><br />
<div style="float:right">3,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>MC1496</b><br/>Modulator/Demodulator<br/><br />
<div style="float:left">O7</div><br />
<div style="float:right">1,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>AD633</b><br/>Analogmultiplizierer<br/><br />
<div style="float:left">O8</div><br />
<div style="float:right">10,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Mini USB Buchse Typ B</b><br/><br/><br />
<div style="float:left">O9</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>NPN Transistor</b><br/>2N2222, TO-18<br/><br />
<div style="float:left">P5</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>NPN Transistor</b><br/>2N6488, TO-220<br/><br />
<div style="float:left">P6</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>N-Kanal MOSFET</b><br/>BS170, TO-92<br/><br />
<div style="float:left">P7</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>N-Kanal JFET</b><br/>2N3819, TO-92<br/><br />
<div style="float:left">P8</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>MCP23017</b><br/>I2C I/O Expander<br/><br />
<div style="float:left">P9</div><br />
<div style="float:right">2,00 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>PNP Transistor</b><br/>2N2907, TO-18<br/><br />
<div style="float:left">Q5</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>PNP Transistor</b><br/>2N6491, TO-220<br/><br />
<div style="float:left">Q6</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>P-Kanal MOSFET</b><br/>BS250, TO-92<br/><br />
<div style="float:left">Q7</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>P-Kanal JFET</b><br/>2N3820, TO-92<br/><br />
<div style="float:left">Q8</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>MCP23S17</b><br/>SPI I/O Expander<br/><br />
<div style="float:left">Q9</div><br />
<div style="float:right">2,00 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>LM13700</b><br/>Transkonduktanzverstaerker<br/><br />
<div style="float:left">R5</div><br />
<div style="float:right">2,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>M4 05 H</b><br/>DIL Miniatur-Signalrelais<br/><br />
<div style="float:left">R6</div><br />
<div style="float:right">2,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>NE5532</b><br/>Dual Low Noise OpAmp<br/><br />
<div style="float:left">R7</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>LM386</b><br/>Low Voltage Audio Power Amp<br/><br />
<div style="float:left">R8</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Arduino Buchsenleisten Sets</b><br/><br/><br />
<div style="float:left">R9</div><br />
<div style="float:right">4,00 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>4046</b><br/>VCO und Phase Locked Loop<br/><br />
<div style="float:left">S5</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>4067</b><br/>16-Channel Analog Mux/Demux<br/><br />
<div style="float:left">S6</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>EPM 121</b><br/>Piezo-Schallwandler<br/><br />
<div style="float:left">S7</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Drucktaster</b><br/>T-113 A Push Button<br/><br />
<div style="float:left">S8</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Kippschalter</b><br/>MIYAMA MS 245<br/><br />
<div style="float:left">S9</div><br />
<div style="float:right">2,00 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:50%;" colspan="5"|<b>Drehschalter (2x6)</b><br/>DS 2PC<br/><br />
<div style="float:left">T6</div><br />
<div style="float:right">2,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:50%;" colspan="5"|<b>Arduino</b><br/><br/><br />
<div style="float:left">T8</div><br />
<div style="float:right">Preise siehe Liste</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center;" colspan="10"|<b>Einseitig Unbeschichtet, 160x100mm</b><br/><br/><br />
<div style="float:left">U7</div><br />
<div style="float:right">2,00 EUR</div><br />
<br />
|}<br />
<br />
===Kasten 3===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
{| style="border-color:blue; border-style:solid; border-width:2px; font-size:70%; width:100%;"<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>10 pF</b><br/>5%, C0G, 200 V<br/><br />
<div style="float:left">A0</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>15 pF</b><br/>5%, C0G, 200 V<br/><br />
<div style="float:left">A1</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>22 pF</b><br/>5%, C0G, 200 V<br/><br />
<div style="float:left">A2</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>33 pF</b><br/>5%, C0G, 200 V<br/><br />
<div style="float:left">A3</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>47 pF</b><br/>5%, C0G, 200 V<br/><br />
<div style="float:left">A4</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>68 pF</b><br/>5%, C0G, 200 V<br/><br />
<div style="float:left">B0</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>100 pF</b><br/>5%, C0G, 200 V<br/><br />
<div style="float:left">B1</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>220 pF</b><br/>5%, C0G, 200 V<br/><br />
<div style="float:left">B2</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>470 pF</b><br/>5%, C0G, 200 V<br/><br />
<div style="float:left">B3</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>1,0 nF</b><br/>10%, X7R, 200 V<br/><br />
<div style="float:left">B4</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>2,2 nF</b><br/>10%, X7R, 200 V<br/><br />
<div style="float:left">C0</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>4,7 nF</b><br/>10%, X7R, 200 V<br/><br />
<div style="float:left">C1</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>10 nF</b><br/>10%, X7R, 200 V<br/><br />
<div style="float:left">C2</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>22 nF</b><br/>10%, X7R, 200 V<br/><br />
<div style="float:left">C3</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>47 nF</b><br/>20%, Z5U, 100 V<br/><br />
<div style="float:left">C4</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>100 nF</b><br/>20%, Z5U, 100 V<br/><br />
<div style="float:left">D0</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>220 nF</b><br/>20%, Z5U, 50 V<br/><br />
<div style="float:left">D1</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>470 nF</b><br/>20%, Z5U, 50 V<br/><br />
<div style="float:left">D2</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>1 uF Elko</b><br/>100 V, 2 mm Pin, 5 mm Durchm.<br/><br />
<div style="float:left">D3</div><br />
<div style="float:right">0,20 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>2,2 uF Elko</b><br/>100 V, 2 mm Pin, 5 mm Durchm.<br/><br />
<div style="float:left">D4</div><br />
<div style="float:right">0,20 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>10 uF Elko</b><br/>100 V, 2 mm Pin, 5 mm Durchm.<br/><br />
<div style="float:left">E0</div><br />
<div style="float:right">0,20 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>100 uF Elko</b><br/>100 V, 5 mm Pin, 10 mm Durchm.<br/><br />
<div style="float:left">E1</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>470 uF Elko</b><br/>35 V, 5 mm Pin, 10 mm Durchm.<br/><br />
<div style="float:left">E2</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>1000 uF Elko</b><br/>16 V, 5 mm Pin, 10 mm Durchm.<br/><br />
<div style="float:left">E3</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>2200 uF Elko</b><br/>16 V, 5 mm Pin, 12,5 mm Durchm.<br/><br />
<div style="float:left">E4</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Leistung Schottky Diode</b><br/>SB360, DO-201AD<br/><br />
<div style="float:left">F0</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Z-Diode 3,6 V</b><br/>BZX85-C3V6, DO-41<br/><br />
<div style="float:left">F1</div><br />
<div style="float:right">0,20 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>10 uH Indukt</b><br/>max. 680mA<br/><br />
<div style="float:left">F2</div><br />
<div style="float:right">0,20 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>100 uH Indukt</b><br/>max. 370mA<br/><br />
<div style="float:left">F3</div><br />
<div style="float:right">0,20 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>1000 uH Indukt</b><br/>max. 130mA<br/><br />
<div style="float:left">F4</div><br />
<div style="float:right">0,20 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Schaltdiode</b><br/>1N4148, DO-35<br/><br />
<div style="float:left">G0</div><br />
<div style="float:right">0,05 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Gleichrichtdiode</b><br/>1N4007, DO-41<br/><br />
<div style="float:left">G1</div><br />
<div style="float:right">0,05 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Schottky Diode</b><br/>BAT48, DO-35<br/><br />
<div style="float:left">G2</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Z-Diode 5,1 V</b><br/>BZX85-C5V1, DO-41<br/><br />
<div style="float:left">G3</div><br />
<div style="float:right">0,20 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>LED Gruen</b><br/>T-1 3/4 (5mm)<br/><br />
<div style="float:left">G4</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>NPN Transistor</b><br/>BC547B, TO-92<br/><br />
<div style="float:left">H0</div><br />
<div style="float:right">0,20 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>PNP Transistor</b><br/>BC557B, TO-92<br/><br />
<div style="float:left">H1</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>NPN Transistor</b><br/>2N3055, TO-3<br/><br />
<div style="float:left">H2</div><br />
<div style="float:right">1,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>TS912</b><br/>CMOS Dual-OpAmp<br/><br />
<div style="float:left">H3</div><br />
<div style="float:right">2,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>LED Rot</b><br/>T-1 3/4 (5mm)<br/><br />
<div style="float:left">H4</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Spannungsregler LM317</b><br/>1,2 V bis 37 V<br/><br />
<div style="float:left">I0</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Spannungsregler LM337</b><br/>-1,2 V bis -37 V<br/><br />
<div style="float:left">I1</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>MC34063A</b><br/>DC-to-DC Control Circuit<br/><br />
<div style="float:left">I2</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>N-Kanal MOSFET</b><br/>IRL2703, TO-220<br/><br />
<div style="float:left">I3</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>LED IR 880nm</b><br/>T-1 3/4, SHF485<br/><br />
<div style="float:left">I4</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>LM358</b><br/>Dual-OpAmp<br/><br />
<div style="float:left">J0</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>ICM7555</b><br/>CMOS Timer<br/><br />
<div style="float:left">J1</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>CNY17-3</b><br/>Optokoppler<br/><br />
<div style="float:left">J2</div><br />
<div style="float:right">0,20 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>MAX232</b><br/>Dual EIA-232 to 5V Transceiver<br/><br />
<div style="float:left">J3</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>40109</b><br/>Quad Voltage Shifter 3-20 V<br/><br />
<div style="float:left">J4</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>4011</b><br/>Quad 2-Input NAND<br/><br />
<div style="float:left">K0</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>4016</b><br/>Quad Analog Switch<br/><br />
<div style="float:left">K1</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>4021</b><br/>8-Bit Shift Register PISO Async<br/><br />
<div style="float:left">K2</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>4094</b><br/>8-Bit Shift Register SIPO Async<br/><br />
<div style="float:left">K3</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>40106</b><br/>Hex Schmitt Trigger<br/><br />
<div style="float:left">K4</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>16 MHz Quarz</b><br/>HC49US<br/><br />
<div style="float:left">L0</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Photo-Diode</b><br/>SFH203, T-1 3/4, 400-1100nm (880nm)<br/><br />
<div style="float:left">L1</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Photo-Transitor</b><br/>SFH309, T-1 3/4, 380-1180nm (880nm)<br/><br />
<div style="float:left">L2</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>AVR ATTiny45</b><br/>8-DIP<br/><br />
<div style="float:left">L3</div><br />
<div style="float:right">3,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>AVR ATMega168</b><br/>28-DIP<br/><br />
<div style="float:left">L4</div><br />
<div style="float:right">5,00 EUR</div><br />
<br />
|}<br />
<br />
===Kasten 4===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
{| style="border-color:blue; border-style:solid; border-width:2px; font-size:70%; width:100%;"<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>SUB-D 9 Pol Buchse Loetkelch</b><br/><br/><br />
<div style="float:left">A5</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>SUB-D 9 Pol Stecker Loetkelch</b><br/><br/><br />
<div style="float:left">A6</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>SUB-D 25 Pol Buchse Loetkelch</b><br/><br/><br />
<div style="float:left">A7</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>SUB-D 25 Pol Stecker Loetkelch</b><br/><br/><br />
<div style="float:left">A8</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>USB Buchse Typ B</b><br/><br/><br />
<div style="float:left">A9</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Jumper RM 2,54</b><br/><br/><br />
<div style="float:left">B5</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Stiftleiste 40 Pol Winkel</b><br/><br/><br />
<div style="float:left">B6</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Stiftleiste 40 Pol Gerade</b><br/><br/><br />
<div style="float:left">B7</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Buchsenleiste, 10 Pol, RM 2.54, Winkel</b><br/><br/><br />
<div style="float:left">B8</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Buchsenleiste, 10 Pol, RM 2.54, Gerade</b><br/><br/><br />
<div style="float:left">B9</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Buchsenleiste, 2x16 Pol, RM 2.00, Gerade</b><br/><br/><br />
<div style="float:left">C5</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Bananenstecker 4mm Rot</b><br/><br/><br />
<div style="float:left">C6</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Bananenstecker 4mm Schwarz</b><br/><br/><br />
<div style="float:left">C7</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Kupplung fuer Hohlstecker 2,1mm</b><br/><br/><br />
<div style="float:left">C8</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Klinkenkupplung 3,5mm Stereo</b><br/><br/><br />
<div style="float:left">C9</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>8-DIP Sockel</b><br/><br/><br />
<div style="float:left">D5</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>14-DIP Sockel</b><br/><br/><br />
<div style="float:left">D6</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>16-DIP Sockel</b><br/><br/><br />
<div style="float:left">D7</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>28-DIP Sockel</b><br/><br/><br />
<div style="float:left">D8</div><br />
<div style="float:right">0,15 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Praez.-Buchsenleiste 20 Pol</b><br/><br/><br />
<div style="float:left">D9</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Trimmpoti 1 kOhm</b><br/>Bourns 3386P-1-102LF<br/><br />
<div style="float:left">E5</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Trimmpoti 10 kOhm</b><br/>Bourns 3386P-1-103LF<br/><br />
<div style="float:left">E6</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Drehimpulsgeber</b><br/>Bourns PEC11-4225F-S24<br/><br />
<div style="float:left">E7</div><br />
<div style="float:right">2,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>DIP-Schalter 10 Pol</b><br/>10-DIP<br/><br />
<div style="float:left">E8</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Taster</b><br/>Mini-Taster 6,5mm<br/><br />
<div style="float:left">E9</div><br />
<div style="float:right">0,20 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Spindeltrimmer 100 kOhm</b><br/>Bourns 3296P-1-104LF<br/><br />
<div style="float:left">F5</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Stiftleiste 2x10 Pol RM 1,27</b><br/><br/><br />
<div style="float:left">F6</div><br />
<div style="float:right">2,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Buchsenleiste 2x10 Pol RM 1,27</b><br/><br/><br />
<div style="float:left">F7</div><br />
<div style="float:right">2,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Hohlstecker 2,1mm</b><br/><br/><br />
<div style="float:left">F8</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Modular Buchse 8 polig (aka RJ45)</b><br/><br/><br />
<div style="float:left">F9</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Spannungsregler LF33CV</b><br/>3.3 V<br/><br />
<div style="float:left">G5</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Spannungsregler LF50CV</b><br/>5 V<br/><br />
<div style="float:left">G6</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Federkontakt-Buchsenleiste 36 Pol</b><br/><br/><br />
<div style="float:left">G7</div><br />
<div style="float:right">3,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>SN74LVC1G97</b><br/>Configurable Multiple-Function Gate<br/><br />
<div style="float:left">G8</div><br />
<div style="float:right">0,20 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>SN74LVC1G79</b><br/>Positive-Edge-Triggered D-Type Flip-Flop<br/><br />
<div style="float:left">G9</div><br />
<div style="float:right">0,20 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>0,22 Ohm</b><br/>5%, 0.5W, Metallschicht<br/><br />
<div style="float:left">H5</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>0,33 Ohm</b><br/>5%, 0.5W, Metallschicht<br/><br />
<div style="float:left">H6</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>0,47 Ohm</b><br/>5%, 0.5W, Metallschicht<br/><br />
<div style="float:left">H7</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>0,68 Ohm</b><br/>5%, 0.5W, Metallschicht<br/><br />
<div style="float:left">H8</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>1 Ohm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">H9</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>1,5 Ohm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">I5</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>2,2 Ohm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">I6</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>3,3 Ohm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">I7</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>4,7 Ohm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">I8</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>6,8 Ohm</b><br/>1%, 0.6W, Metallschicht<br/><br />
<div style="float:left">I9</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>20 MHz Quarz</b><br/>HC49US<br/><br />
<div style="float:left">J5</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>18,432 MHz Quarz</b><br/>HC49US<br/><br />
<div style="float:left">J6</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Z-Diode 3,6 V / 0,5W</b><br/>---, DO-35<br/><br />
<div style="float:left">J7</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>DC-ME-Y402-LX</b><br/>Digi Connect ME 9210 (Linux)<br/><br />
<div style="float:left">J8</div><br />
<div style="float:right">50,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|J9<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>FT232BL</b><br/>USB RS232/RS422/RS485 Interface<br/><br />
<div style="float:left">K5</div><br />
<div style="float:right">5,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>CY8C29466-24PXI</b><br/>28-DIP<br/><br />
<div style="float:left">K6</div><br />
<div style="float:right">7,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>GAL</b><br/>GAL16V8D-15QP<br/><br />
<div style="float:left">K7</div><br />
<div style="float:right">2,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>RFM12</b><br/>868 MHz Funk-Transceiver Modul<br/><br />
<div style="float:left">K8</div><br />
<div style="float:right">6,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Kuehlkoerper</b><br/>TO-220, 9,9 K/W<br/><br />
<div style="float:left">K9</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>6 MHz Quarz</b><br/>HC49US<br/><br />
<div style="float:left">L5</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Photo-Widerstand</b><br/>A906009, <br/><br />
<div style="float:left">L6</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>IR-Empfaenger</b><br/>TSOP1736, IR-Empfangsmodul 36kHz<br/><br />
<div style="float:left">L7</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>CPLD</b><br/>XC9536XL VQ44<br/><br />
<div style="float:left">L8</div><br />
<div style="float:right">3,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>FPGA</b><br/>XC3S50 VQ100<br/><br />
<div style="float:left">L9</div><br />
<div style="float:right">15,00 EUR</div><br />
<br />
|}<br />
<br />
===Kasten 5===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
{| style="border-color:blue; border-style:solid; border-width:2px; font-size:70%; width:100%;"<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|10<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|11<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|12<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|13<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|14<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|20<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|21<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|22<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|23<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|24<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|30<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|31<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|32<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|33<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|34<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|40<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|41<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|42<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|43<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|44<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|50<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|51<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|52<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|53<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|54<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|60<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|61<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|62<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|63<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|64<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|70<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|71<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|72<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|73<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|74<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:50%;" colspan="5"|81<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:50%;" colspan="5"|83<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center;" colspan="10"|92<br />
|}<br />
<br />
===Kasten 6===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
{| style="border-color:blue; border-style:solid; border-width:2px; font-size:70%; width:100%;"<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|15<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>NE555</b><br/>TTL Timer<br/><br />
<div style="float:left">16</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>064-LSP40</b><br/>Lautsprecher<br/><br />
<div style="float:left">17</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>064-MIC01</b><br/>Elektret-Kond.-Mikrofon<br/><br />
<div style="float:left">18</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>LED RGB</b><br/>T-1 3/4 (5mm)<br/><br />
<div style="float:left">19</div><br />
<div style="float:right">1,00 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|25<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|26<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|27<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|28<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|29<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|35<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|36<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|37<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|38<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|39<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|45<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|46<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|47<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|48<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|49<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|55<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|56<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|57<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|58<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|59<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|65<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|66<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|67<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|68<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|69<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Jumper-Wire F/F</b><br/><br/><br />
<div style="float:left">75</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>Jumper-Wire F/M</b><br/><br/><br />
<div style="float:left">76</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>SMD-Adapter TSOP8/MSOP8</b><br/><br/><br />
<div style="float:left">77</div><br />
<div style="float:right">0,80 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>SMD-Adapter SOIC8</b><br/><br/><br />
<div style="float:left">78</div><br />
<div style="float:right">0,50 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:20%;" colspan="2"|<b>SMD-Adapter SOT-23</b><br/><br/><br />
<div style="float:left">79</div><br />
<div style="float:right">0,30 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:50%;" colspan="5"|<b>Jumper-Wire M/M</b><br/><br/><br />
<div style="float:left">86</div><br />
<div style="float:right">0,10 EUR</div><br />
<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center; width:50%;" colspan="5"|<b>ES-05 JR</b><br/>Mini Servo<br/><br />
<div style="float:left">88</div><br />
<div style="float:right">6,00 EUR</div><br />
<br />
|-<br />
|style="border-color:blue; border-style:solid; border-width:5px; height:10em; padding-left:1em; padding-right:1em; text-align:center;" colspan="10"|97<br />
|}<br />
<br />
==Naechste Bestellung==<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
<br />
Dieser Abschnitt beinhaltet den derzeitigen Stand der naechsten geplanten Bestellung.<br />
<br />
Kontakt fuer Bestellabwicklung (z.Bsp. bei dringendem Bedarf an nachgekauften Bauteilen):<br />
Astrid und Clifford<br />
<br />
ACHTUNG: Die tatsaechlichen Preise koennen abweichen, da Mengenrabatte nicht beruecksichtigt<br />
werden und die Preise beim Lieferanten sich inzwischen veraendert haben koennen.<br />
<br />
Gesamtbestellwert: 384,70 EUR<br />
<br />
===SmartPrj===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right;width:100%;"<br />
! Fach !! Beschreibung !! Anzahl !! VPE !! Bestell-Nr. !! Einzel-Preis !! Preis<br />
|- style="background:#ccc;"<br />
| T8.1<br />
| Arduino<br />
| 10<br />
| 1<br />
| Arduino<br />
| 24,000 EUR<br />
| 240,00 EUR<br />
|- <br />
|colspan="6"|Total<br />
| 240,00 EUR<br />
|}<br />
<br />
Code zum Bestellen ueber die Lieferantenhomepage:<br />
Num VPE Total Price Best-Nr. Beschreibung<br />
--- --- ----- ----- -------- ------------<br />
10 1 10 240.00 Arduino Arduino<br />
<br />
===CSD===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right;width:100%;"<br />
! Fach !! Beschreibung !! Anzahl !! VPE !! Bestell-Nr. !! Einzel-Preis !! Preis<br />
|- style="background:#ccc;"<br />
| O2<br />
| 1,0 kOhm<br />
| 200<br />
| 1<br />
| 113-K001<br />
| 0,020 EUR<br />
| 4,00 EUR<br />
|- <br />
| 19<br />
| LED RGB<br />
| 50<br />
| 1<br />
| 25-5RGB509<br />
| 0,95 EUR<br />
| 47,50 EUR<br />
|- style="background:#ccc;"<br />
| B5<br />
| Jumper RM 2,54<br />
| 200<br />
| 1<br />
| 015491<br />
| 0,04 EUR<br />
| 8,00 EUR<br />
|- <br />
|colspan="6"|Total<br />
| 59,50 EUR<br />
|}<br />
<br />
Code zum Bestellen ueber die Lieferantenhomepage:<br />
Num VPE Total Price Best-Nr. Beschreibung<br />
--- --- ----- ----- -------- ------------<br />
200 1 200 4.00 113-K001 1,0 kOhm<br />
50 1 50 47.50 25-5RGB509 LED RGB<br />
200 1 200 8.00 015491 Jumper RM 2,54<br />
<br />
===RS===<br />
<!-- Auto-generated by sortiment.spl - do not manually change this section! --><br />
{|border="1" cellpadding="5" cellspacing="0" style="text-align:right;width:100%;"<br />
! Fach !! Beschreibung !! Anzahl !! VPE !! Bestell-Nr. !! Einzel-Preis !! Preis<br />
|- style="background:#ccc;"<br />
| E0<br />
| 10 uF Elko<br />
| 50<br />
| 5<br />
| 228-7079<br />
| 0,840 EUR<br />
| 42,00 EUR<br />
|- <br />
| I3<br />
| N-Kanal MOSFET<br />
| 50<br />
| 1<br />
| 541-2177<br />
| 0,864 EUR<br />
| 43,20 EUR<br />
|- style="background:#ccc;"<br />
|colspan="6"|Total<br />
| 85,20 EUR<br />
|}<br />
<br />
Code zum Bestellen ueber die Lieferantenhomepage:<br />
228-7079,50<br />
541-2177,50<br />
<br />
==Alte Bestellungen==<br />
<br />
Alte Bestellungen werden auf der Seite [[Bauteilsortiment Bestellarchiv]] archiviert.<br />
<br />
==Weitere Vorschläge (review later)==<br />
<br />
=== Leiterplatten Steckverbinder (2-Teilig) ===<br />
- Phobos 2012.07.22<br />
<br />
* Dieser 2-teilige Steckverbinder wird in vielen Industrieplatinen verwendet, so auch in den Schrittmotorsteuerungen unseres CNC Projekts. Besser als einfache Schraubterminals, da auch auf der Kabelseite ein Steckerteil montiert ist. 4-Polige Variante universell einsetzbar, kann notfalls auf 2 oder 3 Polig zurechtgesägt werden. Rastermass 5.08mm 12A Kontaktbelastbarkeit<br />
<br />
Teilebezeichnung:<br />
Stecker: Phoenix MSTB 2,5/4-ST-5,08<br />
Basis: Phoenix MSTB 2,5/4-G-5,08<br />
<br />
http://www.phoenixcontact.com/online/portal/de<br />
<br />
<br />
=== Screw terminals ===<br />
<br />
* Something like this:<br />
http://www.reichelt.de/Leiterplatten-Anschlussklemmen/AKL-012-04/index.html?;ACTION=3;LA=2;ARTICLE=36619;GROUPID=3894;SID=12TWZbo38AAAIAABhOjGoe35d4b3022f6481b5840bea8c26c8df0<br />
<br />
=== P-Channel Power MOSFET ===<br />
<br />
'''ZXMP3F35N8''' (Bei RS um 33 cent @50pcs)<br />
<br />
* RDSon bei VGS=4.5V und >10A ID: 18 milliOhm<br />
* VDS: 30V, VGS: +-20V<br />
* Continuous Drain Current: 12.3A<br />
* Das SO8 Gehäuse lässt sich sehr elegant direkt auf ein zu schaltendes Kabel löten<br />
<br />
=== N-Channel MOSFET ===<br />
<br />
'''IRF8721PBF''' (Bei RS um 31 cent @50pcs)<br />
<br />
* RDSon: 8,5 milliOhm<br />
* VDS: 30V, VGS: +-20V<br />
* Continuous Drain Current: 14A<br />
* Package SO8 <br />
<br />
=== Weitere Coole Bauteile ===<br />
<br />
Falls man mal ''richtig Leistung'' schalten muss:<br />
<br />
'''IRFS3004PBF''' (bei RS um 2,63 EUR)<br />
<br />
RDSon: 1,75 mOhm<br />
* ID: 340A (silicon limit) / 195A (bond limit)<br />
* VDS: 40V<br />
* VGS ±20V<br />
<br />
Zwei gute billige SOT-23 Universal-Transistoren (problemlos mit der Hand zu löten)<br />
<br />
# '''MMBT2222A-7-F''' (RS, 2,5 cent) NPN 40V 0,6A <br />
# '''MMBT2907A-7-F''' (RS, 2,2 cent) PNP 60V 0,6A<br />
<br />
Zwei gute billige "komplementär" FETs der 2,5A-Klasse:<br />
<br />
# '''TSM2301CX''' (RS, 12 cent) P-CH 2,8A RDSon 130 mOhm SOT-23 <br />
# '''TSM2302CX''' (RS, 12 cent) N-CH 2,8A RDSon 65 mOhm SOT-23 <br />
<br />
Leistungsdioden:<br />
* '''P600J''' SI-Diode bis 22A/600V (RS, 23 cent @50) <br />
* '''MBR3060CT''' Schottky 30A/60V (RS, 74 cent @25)<br />
<br />
--[[Benutzer:Vic|Vic]] 02:54, 21. Mai 2011 (CEST)<br />
<br />
=== SPI Ethernet Interface ===<br />
<br />
ENC28J60 ist ein standalone Ethernet Controller mit SPI Port (rs ~3€)<br/><br />
- [[User:Reox|Reox]] 22:00, 28. Mär. 2011 (CEST)<br />
<br />
Hmm... Dazu brauchte man dann natuerlich noch den passenden 25MHz Quarz und<br />
passende RJ45 buchsen mit internen magnetics (aka MagJack). Letztere finde ich gerade nicht,<br />
ich fuerchte aber die sind in kleinen stueckzahlen teurer als der chip. Hast<br />
du mit dem Bauteil schon Erfahrung bzw. hast du ein konkretes Projekt?<br/><br />
- [[Benutzer:Clifford|Clifford]] 22:42, 28. Mär. 2011 (CEST)<br />
<br />
Man sollte sich auch ueberlegen ob fuers bauteilsortiment ein fertiges modul<br />
z.B. mit dem WIZnet W5100 hardware TCP/IP stack (bei watterott um 20 EUR) nicht<br />
besser geeignet waere..<br/><br />
- [[Benutzer:Clifford|Clifford]] 23:01, 28. Mär. 2011 (CEST)<br />
<br />
vermutlich ja, es gibt auch fertige Ethernet Shields für den Arduino. <br />
Ich würde gerne ein bissi Auswertung und Steuerung übers Netzwerk machen. Ich kann mir mal welche bestellen und testen wie gut das geht.<br />
Angeblich ist es das günstigste/einfachste um µC Netzwerktauglich zu machen.<br />
Als Projekt würde ich auch gerne ein Breadboardshield erstellen, das sich jeder fräsen kann zum experimentieren.<br />
--[[Benutzer:Reox|Reox]] 12:10, 29. Mär. 2011 (CEST)<br />
<br />
* arduino ethernet (mit w5100) hab ich gerade in verwendung. mag schon gute hardware sein, aber library-seitig ist der enc28j60 wesentlich besser unterstuetzt, naemlich mit uip (auch uipv6, bzw. halt contiki -- beim wiznet-chip muesste man fuer v6 frisch raw packages behandeln, [http://wiznettech.com/Sub_Modules/en/technical/Q_A_View.asp?boardcd=101&PK_NUM=24438&page=1&SF_Part=&SF_KeyWord= sie arbeiten an einem nachfolger]). fuer w5100 hab ich bislang nur [http://www.seanet.com/~karllunt/w5100_library.html eine library] gefunden, die nicht arduino-style daher kommt. fairerweise: mit enc28j60 hab ich noch nicht gearbeitet --[[Benutzer:Chrysn|chrysn]] 11:14, 3. Nov. 2011 (CET)<br />
<br />
=== SPI Sensoren ===<br />
<br />
div SPI Temperatur Sensoren<br/><br />
- [[User:Reox|Reox]] 22:00, 28. Mär. 2011 (CEST)<br />
<br />
bitte um konkrete Vorschlaege. welcher Chip?<br/><br />
- [[Benutzer:Clifford|Clifford]] 22:42, 28. Mär. 2011 (CEST)<br />
<br />
* SCP1000 (SPI Luftdruchsensor) od Bosch BMP005 (I²C)<br />
* LM74CIM-3 (SPI Temperatursensor)<br />
* Hall Effekt Sensoren (ohne SPI)<br />
--[[Benutzer:Reox|Reox]] 12:10, 29. Mär. 2011 (CEST)<br />
<br />
=== Weitere Sensoren ===<br />
<br />
* [http://such001.reichelt.de/index.html?;ACTION=446;LA=446;SEARCH=sharp;OFFSET=16;SORT=-rank;SHOW=1;SID=33T4Qlln8AAAIAAAP@9xY3e39d37b7d64f01e49e7125592d936eb;GROUPID=287 Sharp Distanz-Sensoren].<br />
<br />
===LEDs===<br />
<br />
* RGB Leds (4-Pins, nichts exotisches)<br />
<br />
===Weitere Stecker/Buechsen===<br />
<br />
* Klinkenstecker 3,5mm Stereo <br />
* Klinkenbuchsen 3,5mm (Printmontage und/or Panelmontage) z.B. [http://www.reichelt.de/Klinkeneinbaubuchsen/EB-35/index.html?;ACTION=3;LA=444;GROUP=C1613;GROUPID=5172;ARTICLE=7276;START=0;SORT=artnr;OFFSET=16;SID=33T4Qlln8AAAIAAAP@9xY3e39d37b7d64f01e49e7125592d936eb#av_tabtech das] oder [http://www.reichelt.de/Klinkeneinbaubuchsen/EBS-35/index.html?;ACTION=3;LA=2;ARTICLE=7301;GROUPID=5172;artnr=EBS+35;SID=33T4Qlln8AAAIAAAP@9xY3e39d37b7d64f01e49e7125592d936eb das].<br />
* Crimpkontakte und Kupplungsgehäuse z.B. [http://such001.reichelt.de/?SID=33T4Qlln8AAAIAAAP@9xY3e39d37b7d64f01e49e7125592d936eb;ACTION=446 diese].<br />
<br />
===Roehren===<br />
<br />
Mein Vorschlag: ECC83 (12AX7 in US, eine weit verbreitete niederspannungs doppel-triode)<br><br />
- [[Benutzer:Clifford|Clifford]] 01:21, 14. Feb. 2010 (CET)<br />
<br />
===OpAmps===<br />
<br />
MCP 6002-I/P Low Power Rail-to-Rail OpAmp (bei Reichelt 0,33 EUR)<br />
<br />
===DC Motoren===<br />
<br />
z.Bsp. Modelcraft (Conrad Eigenmarke) mit verschiedenen Uebersetzungen.<br><br />
- [[Benutzer:Clifford|Clifford]] 22:07, 1. Jan. 2011 (CET)<br />
<br />
===Lazzzor Verbrauchsmaterial===<br />
<br />
6mm Sperrholzplatten a 50x50 cm sind da aber haben dz. keine Sortiment Nummer.<br />
<br />
Sowie die Ladenkaesten vor dem sortiment woanders stehen koennen wir uns gedanken machen<br />
ueber ein regalsystem fuer lazzor verbrauchsmaterial. dann bekommen die sachen hoffentlich<br />
auch sortiment nummern zugeordnet und wir koennen das ein wenig erweitern.<br />
<br />
===SMD Adapter===<br />
<br />
SMD Adapter fuer zumindest die SMD Bauteile aus dem Sortiment:<br/><br />
http://www.futurlec.com/SMD_Adapters.shtml<br />
<br />
===FT232RL===<br />
<br />
Ich wäre dafür zusätzlich zu den vorhandenen FT232BL auch ein paar FT232RL zu beschaffen oder gleich zu ersetzen. Er braucht wesentlich weniger Außenbeschaltung und ist in der Anschaffung etwas billiger (4.15 vs 2.95 €). Dafür wäre das Verlöten etwas schwerer (0.65 vs 0.8 Pin-Abstand). Beide gibt es bei dem selben Lieferanten, der müsste also nichtmal gewechselt werden.<br />
<br />
===Jumper Wires===<br />
<br />
zum Beispiel:<br />
* http://www.watterott.com/de/Boards-Kits/Zubehoer/Jumper-Wires<br />
* http://www.seeedstudio.com/depot/prototyping-cable-wire-c-175_187.html (via [[User:ra|ra]])<br />
<br />
viele M/M und einige F/M sowie F/F. Die M/M werden wahrscheinlich deutlich billiger ausfallen.<br/><br />
[[Benutzer:Clifford|Clifford]] 20:49, 13. Jul. 2011 (CEST)<br />
<br />
=== Accelerometer ===<br />
<br />
analog und/oder digital.<br />
<br />
z.B.:<br />
* http://at.rs-online.com/web/p/products/7167065/<br />
* http://at.rs-online.com/web/p/products/7190995/<br />
--[[Benutzer:Tie-fighter|Tie-fighter]] 19:41, 16. Aug. 2011 (CEST)<br />
<br />
<br />
=== RaspberryPI ===<br />
<br />
* 25$ (Model A) / 35$ (Model B)<br />
* 700MHz Broadcom BCM2835 media processor featuring an ARM11 ARM1176JZF-S core, Broadcom GPU core, DSP core and support for Package-on-Package (PoP) RAM<br />
* 128MiB (Model A) or 256MiB of SDRAM (Model B), stacked on top of the CPU as a PoP device<br />
* OpenGL ES 2.0<br />
* 1080p30 H.264 high-profile decode<br />
* Composite and HDMI video output (not at the same time)<br />
* One USB 2.0 port provided by the BCM2835<br />
* SD/MMC/SDIO memory card slot<br />
* General-purpose I/O (About 16 3v3) and various other interfaces, brought out to 1.27mm pin-strip<br />
* Optional integrated 2-port USB hub and 10/100 Ethernet controller (Model B)<br />
* Debian, Fedora, Arch<br />
* ...<br />
<br />
http://elinux.org/RaspberryPiBoard#Hardware_Details<br />
<br />
http://www.raspberrypi.org/<br />
<br />
[[Benutzer:Uniqx|Uniqx]] 04:46, 29. Dez. 2011 (CEST)<br />
<br />
==Rechnungsadresse fuer Bestellungen==<br />
<br />
Alle Rechnungen fuers Bauteilsortiment muessen folgende Rechnungsadresse tragen:<br />
<br />
Verein zur Foerderung der Erforschung <br />
und Bildung sozialer und technischer <br />
Innovationen - metalab<br />
z.Hd. Clifford Wolf<br />
Rathausstrasse 6<br />
1010 Wien<br />
<br />
==Leiterplattenhersteller==<br />
<br />
* [http://www.eurocircuits.com/ Euro Circuits]<br />
* [http://www.pcb-pool.com/ PCB-Pool (aka Beta Layout)]<br />
* [http://pcb-center.de/ M&V Leiterplatten (aka PCB Center)]<br />
* [http://www.q-pcb.de/ Q-Print (aka Q-PCB)]<br />
* [http://www.dorkbotpdx.org/ DorkbotPDX]<br />
* [http://batchpcb.com/ BatchPCB]<br />
* [http://www.olimex.com/ Olimex]<br />
* [http://www.goldphoenixpcb.biz/ Gold Phoenix PCB]<br />
* [http://www.seeedstudio.com/wiki/index.php?title=Opensourcepcb Seed Studio PCB Service]<br />
* [http://www.leiton.de/ LeitOn]<br />
* [http://www.pcbcart.com/ PCBcart]<br />
* [http://www.britze.de/ Britze.de]<br />
<br />
==Lieferantensuche==<br />
<br />
* [http://www.findchips.com/ FindChips]<br />
* [http://octopart.com/ Octopart Part Search]<br />
<br />
==Lieferanten==<br />
<br />
* [http://www.digikey.at/ Digi-Key]: Lieferung aus den USA, Preise inklusive Zoll, exkl. 20% USt, Mindestbestellung 150 EUR, sonst bis zu 18 EUR (über 100 EUR) oder 26 EUR (darunter) Zusatzspesen.<br />
* [http://www.rs-components.at/ RS-Components]: Preise exkl. 20% USt, kein Mindestbestellwert, liefert nur an Firmen / Vereine<br />
* [http://www.conrad.at/ Conrad]: Preise incl. 20% Ust<br />
* [http://reichelt-elektronik.at/ Reichelt Elektronik]: Preise incl. 20% USt<br />
* [http://www.csd-electronics.de/ CSD Electronics]: Preise incl. 19% USt, kein Mindestbestellwert<br />
* [http://at.farnell.com Farnell]<br />
* [http://www.technotronic.at/ Technotronic]<br />
* [http://www.atlantikelektronik.com/ atlantik_elektronik]<br />
* [http://www.bmz-gmbh.eu/ BMZ Batterien]<br />
* [http://www.segor.de Segor Electronics]<br />
* [http://www.tme.eu/de/ TME Electronic Components]<br />
* [http://www.smartprj.com/ Smart Projects (fka PCB Europe)]<br />
* [http://www.distrelec.at/ Distrelec]<br />
* [http://www.4uconnector.com 4Ucon] - They have very nicely priced connectors/headers<br />
* [http://pcengines.ch PCEngines] - they focus on cheap Wlan/HF equip, e.g U.fl-N bulkhead pigtails for 2 EUR, casings, debug boards as well as GeodeLX800 (x86) boards <90 EUR<br />
* [http://www.goldmine-elec-products.com/ Electronic Goldmine] - Electronics, Circuits, Robots, LED, Solar, Kits & Surplus Electronic Parts<br />
* [http://ribu.at/OnLi_Kat.htm Ribu] - Selected stuff, incl. the famous Buchsenleiste..<br />
* [http://www.watterott.com/ Watterott Electronic]<br />
* [http://www.octamex.de octamex] nicht mehr guenstige Versandkosten aus D<br />
* [http://www.inventables.com/ Inventables]: Find new materials<br />
<br />
==Siehe auch==<br />
[[WhateverLab:Kollaborative_Einkaufsliste]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=Werkstatt/2.0/20120331&diff=41307
Werkstatt/2.0/20120331
2012-03-31T22:37:06Z
<p>Chrysn: besprechung eingetragen</p>
<hr />
<div>* Elektrowerkzeuge<br />
** gereinigt<br />
** ausprobiert<br />
** photographiert<br />
** einsortiert<br />
** Unbrauchbares aussortiert<br />
* Metall-CNC-Tisch geplant<br />
* alter CNC-Käfig zerlegt<br />
* CNC weiter geputzt, Planung für einfaches Zerlegen der Tiefenanschlags-Aufhängung<br />
* Neuen CNC-PC grundlegend aufgesetzt und altes System überspielt (noch keine Konfiguration)<br />
** Parallelport gefunden und installiert<br />
* grünen Kasten abmontiert<br />
* blauer Metallkasten:<br />
** Aufhängung angezeichnet und vorgebohrt<br />
** Stangen und Sicherungsmuttern eingekauft<br />
* Schaltungskonzept für neuen Sicherungskasten erstellt<br />
* Plane enttackert<br />
* Schweißecke besprochen</div>
Chrysn
https://metalab.at/wiki/index.php?title=Werkstatt/2.0/20120331&diff=41306
Werkstatt/2.0/20120331
2012-03-31T20:18:22Z
<p>Chrysn: noch was erledigt</p>
<hr />
<div>* Elektrowerkzeuge<br />
** gereinigt<br />
** ausprobiert<br />
** photographiert<br />
** einsortiert<br />
** Unbrauchbares aussortiert<br />
* Metall-CNC-Tisch geplant<br />
* alter CNC-Käfig zerlegt<br />
* CNC weiter geputzt, Planung für einfaches Zerlegen der Tiefenanschlags-Aufhängung<br />
* Neuen CNC-PC grundlegend aufgesetzt und altes System überspielt (noch keine Konfiguration)<br />
** Parallelport gefunden und installiert<br />
* grünen Kasten abmontiert<br />
* blauer Metallkasten:<br />
** Aufhängung angezeichnet und vorgebohrt<br />
** Stangen und Sicherungsmuttern eingekauft<br />
* Schaltungskonzept für neuen Sicherungskasten erstellt<br />
* Plane enttackert</div>
Chrysn
https://metalab.at/wiki/index.php?title=Werkstatt/2.0/20120331&diff=41304
Werkstatt/2.0/20120331
2012-03-31T19:56:27Z
<p>Chrysn: weitere erledigungen fuer heute</p>
<hr />
<div>* Elektrowerkzeuge<br />
** gereinigt<br />
** ausprobiert<br />
** photographiert<br />
** einsortiert<br />
** Unbrauchbares aussortiert<br />
* Metall-CNC-Tisch geplant<br />
* alter CNC-Käfig zerlegt<br />
* CNC weiter geputzt, Planung für einfaches Zerlegen der Tiefenanschlags-Aufhängung<br />
* Neuen CNC-PC grundlegend aufgesetzt und altes System überspielt (noch keine Konfiguration)<br />
** Parallelport gefunden und installiert<br />
* grünen Kasten abmontiert<br />
* blauer Metallkasten:<br />
** Aufhängung angezeichnet und vorgebohrt<br />
** Stangen und Sicherungsmuttern eingekauft<br />
* Schaltungskonzept für neuen Sicherungskasten erstellt</div>
Chrysn
https://metalab.at/wiki/index.php?title=Werkstatt/2.0&diff=41303
Werkstatt/2.0
2012-03-31T18:54:47Z
<p>Chrysn: /* Protokolle */ erledigungen von heute verlinkt</p>
<hr />
<div>Hier soll alles zusammengefasst werden, was mit dem Remake der [[Werkstatt]] zu tun hat.<br />
<br />
Die laufende Kommunikation zu dem Thema wird [https://lists.metalab.at/mailman/listinfo/cnc auf der CNC-Mailinglist] [mailto:cnc@lists.metalab.at cnc@lists.metalab.at] abgewickelt.<br />
<br />
== Protokolle ==<br />
<br />
* [[Werkstatt2.0/20120214|Meeting 14.02.2012]]<br />
* [[Werkstatt2.0/20120228|Meeting 28.02.2012]]<br />
* [[2012-03-01_Jour_Fixe#Zerspanungstechnik_.28Heavy_Machinery.29|Jour Fixe 01.03.2012]]<br />
* [[Werkstatt2.0/20120317|Umbauphase 17. bis 18. 3. 2012]]<br />
* [[Werkstatt2.0/20120321|Umbauten 21. 3. 2012]]<br />
* [[Werkstatt2.0/20120326|Arbeiten 26. 3. 2012]]<br />
* [[Werkstatt2.0/20120329|Arbeiten 29. 3. 2012]]<br />
* [[Werkstatt2.0/20120331|Arbeiten 31. 3. 2012]]<br />
<br />
Die Protokolle werden aus Erledigungen der [[Werkstatt2.0/ToDo|ToDo-Liste]] gefüllt.<br />
<br />
Alles, was in der Werkstatt noch herumgelegen ist, ist in [[Werkstatt2.0/Lost&Found]] aufgeführt und harrt in der entsprechenden Kiste der Abholung.<br />
<br />
== Links ==<br />
<br />
* [https://metalab.at/issues/ticket/15 Issue 15 im Metalab-trac] dokumentiert, dass Handlungsbedarf nicht nur von "uns" gesehen wird<br />
<br />
== Händler / Stuff ==<br />
<br />
* Mir wurde [http://www.spiral.at Spiral] als guter Händler für Werkzeug / Zubehör in Wien genannt --[[Benutzer:Reox|Reox]] 23:54, 3. Mär. 2012 (CET)<br />
* Spiral hat zwar Fräser, aber keine kleinen. Die bekommt man bei [http://www.guehring.de Gühring], hat auch eine Filiale in Wien - sind aber rel. teuer --[[Benutzer:Reox|Reox]] 13:34, 7. Mär. 2012 (CET)<br />
* Händler für Fräser etc: [http://www.as-toolstore.de/ AS-Toolstore]<br />
<br />
== Kooperationen ==<br />
Es wurde vorgeschlagen mit Bildungsinstituten zu kooperieren und zB HTL's die keine geeignete Technische Ausrüstung haben den Raum & Maschinen zur verfügung zu stellen um an neue Werkzeuge zu kommen. Beispiel: Maschinenbau HTL fräst und einen Werkzeugswechsler als Diplomarbeit; HTL baut was für uns und darf als Gegenleistung Lasercutter verwenden oder Know-How von uns erhalten (Informatik zB).<br />
<br />
Unter Umständen gute Kooperationspartner, sollte man zumindest mal fragen<br />
* Institut für Fertigungstechnik und Hochleistungslaser TU Wien: [http://www.ift.at]<br />
* HTL Schulzentrum Ungargasse [http://www.szu.at]<br />
* TGM [http://www.tgm.ac.at]<br />
* HTL Spengergasse<br />
* ...<br />
<br />
[[Kategorie:Räume]]<br />
[[Kategorie:WhateverLab]]<br />
[[Kategorie:Werkstatt]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=Werkstatt/2.0/ToDo&diff=41302
Werkstatt/2.0/ToDo
2012-03-31T18:54:38Z
<p>Chrysn: erledigungen von heute ausgetragen</p>
<hr />
<div>Die Einkaufsliste an Ergänzungen für die Werkstatt ist als [[Werkstatt2.0/Einkaufsliste|Einkaufsliste]] angelegt.<br />
<br />
== Hohe Dringlichkeit ==<br />
<br />
* blaue Werkzeugkästen wieder aufbauen und an die Wand schrauben<br />
** Gewindestangen (6 Stk M10) einkaufen<br />
** grünen Kasten dort entfernen (→zem), grünen Werktisch auch (sobald Drehbank geklärt)<br />
* Geschlossenes Fenster: nochmal schleifen, streichen (welche Farbe?)<br />
<br />
== Mittlere Dringlichkeit ==<br />
<br />
* Elektrowerkzeuge<br />
** im Wiki dokumentieren<br />
** Unbrauchbares entworgen<br />
* Stromumbau (→Zwax/Hobbes)<br />
** Steckdosen für bessere Erreichbarkeit versetzen<br />
** Starkstromdosen an die richtigen Stellen<br />
** Sicherungskasten bei Tür mit Not-Aus und extra-Sicherungskreis für Geräte mit fragwürdigem Kurzschlussverhalten<br />
** Platz für blauen Werkzeugkasten machen<br />
* LAN-Dosen in der PC-Ecke (→reox/albert)<br />
* Kaminprüfung mit Rauchfangkehrer für Abluftumwidmung, im Zuge dessen auch Genehmigung für Niederführung von Antennenkabeln einholen (abklären mit Metalab)<br />
** Lüftungsbau<br />
* Holzkonstruktion im linken Eck<br />
** Kabelausparung wandseitig Kanten abrunden (Unter- und Oberseite) mit der Oberfräse (→Oliver)<br />
** Plane reinigen, zuschneiden und montieren<br />
* Regale für über der Drehbank bauen (→Oliver)<br />
** Latten 5x8cm dafür aus den Brettern sägen<br />
* neue Plätze für Erste-Hilfe-Kasten und Schraubzwingen finden<br />
* Gerätekasten für unter dem Klapptisch bauen<br />
* blauen Kasten ausräumen bzw. abklären (Finger weg von Funkamateursachen)<br />
** evtl. aus der Heavy Machinery los werden? Wenn wir eine ordentliche Standbohrmaschine bekommen, wäre das ein geeigneter Platz.<br />
* weiteren Zwischenboden in der anderen Hälfte einziehen? (diskutieren, →Oliver)<br />
* Gummimatten (Angebote einholen)<br />
* Standfläche für Schlagschere, mit Werkbank verbunden<br />
* CNC-Tisch und Käfig (→chrysn)<br />
** Käfigtüren planen<br />
** CNC wieder einbauen und aufsetzen<br />
** Floppy-Kartenleser besorgen (→Albert)<br />
* Licht in Zerspanungsecke (Käfig, Arbeitsplatz, Drehbank)<br />
** Leuchtstoffröhre kaufen: 120cm, Starter ist FS-11 F4W 65W, F80W, CF18W..36W<br />
<br />
== Long term ==<br />
<br />
* Rollwagen für Stangenmaterial für neben CNC<br />
* Fläche vor dem linken, geschlossenen Fenster nutzen – Regale (→Oliver)<br />
* Metallwerktisch zumachen, damit drinnen Geräte gelagert werden können (→Enzi, klären mit Benko)<br />
* CNC verbessern<br />
** 4. Achse<br />
** ATC<br />
** Touchprobe<br />
* Schweißervorhang, falls gleichzeitig geflext und zerspant werden soll, Angebote einholen</div>
Chrysn
https://metalab.at/wiki/index.php?title=Werkstatt/2.0/20120331&diff=41301
Werkstatt/2.0/20120331
2012-03-31T18:50:32Z
<p>Chrysn: erledigungen von heute</p>
<hr />
<div>* Elektrowerkzeuge<br />
** gereinigt<br />
** ausprobiert<br />
** photographiert<br />
** einsortiert<br />
** Unbrauchbares aussortiert<br />
* Metall-CNC-Tisch geplant<br />
* alter CNC-Käfig zerlegt<br />
* CNC weiter geputzt, Planung für einfaches Zerlegen der Tiefenanschlags-Aufhängung<br />
* Neue CNC-Hardware grundlegend aufgesetzt und altes System überspielt (noch keine Konfiguration)<br />
** Parallelport gefunden<br />
* grünen Kasten abmontiert<br />
* blauer Metallkasten:<br />
** Aufhängung angezeichnet und vorgebohrt<br />
** Stangen eingekauft</div>
Chrysn
https://metalab.at/wiki/index.php?title=Werkstatt/2.0/Lost%26Found&diff=41268
Werkstatt/2.0/Lost&Found
2012-03-31T10:01:46Z
<p>Chrysn: lost&found-ergaenzungen</p>
<hr />
<div>Folgendes ist bislang in der Werkstatt2.0-Lost&Found-Kiste gelandet. Der Inhalt der Kiste wird per 1. Mai entsorgt; wer Teile davon für rettenswert hält, möge diese entnehmen und verstauen (nicht in der Werkstatt).<br />
<br />
* Fahrradpumpen, diverse, 3 Stk.<br />
* Motherboard einer NSLU2<br />
* NiMH-Modellbau-Akkus<br />
* lange schwarze Kabel mit BNC-Konnektoren (beschriftet mit "Public Netbase", uU Oszi-Kabel)<br />
* PCA9555-Chips, SMD, 4 Stk.<br />
* Breakout-Boards (für selbige?), 1 Platine im Neunfachnutzen<br />
* rote Weste mit weißen Streifen, Aufschrift FIAT<br />
* schwarze Jean<br />
* Atemluftstrommessgerät [http://www.physiciansofficeresource.com/Diagnostics-Connect/Diagnostics-Detail.aspx?RowID=332&CompanyID=1379 GSK PiKo-1]<br />
* Metalab-Button<br />
* Voltcraft rT-110 Funk-Strommessgerät 16A<br />
* programmierbare Fernbedienung Smart Remote<br />
<br />
Nicht in der Kiste, der gleichen Handhabung unterworfen:<br />
<br />
* SMD-Griller (noch im blauen Holzkasten)</div>
Chrysn
https://metalab.at/wiki/index.php?title=Werkstatt/2.0/ToDo&diff=41241
Werkstatt/2.0/ToDo
2012-03-29T17:14:48Z
<p>Chrysn: kleine korrektur zu blauen metallkaesten / gewinde</p>
<hr />
<div>Die Einkaufsliste an Ergänzungen für die Werkstatt ist als [[Werkstatt2.0/Einkaufsliste|Einkaufsliste]] angelegt.<br />
<br />
== Hohe Dringlichkeit ==<br />
<br />
* Elektrowerkzeuge<br />
** Funktionalität und Sicherheit prüfen<br />
** reinigen<br />
** in blauen Kasten vor Fenster einsortieren (in erster Linie in den unteren der beiden blauen Holzkästen im Fenster)<br />
** katalogisieren (Fotos)<br />
** Unbrauchbares sammeln und zur Abholung / Entsorgung vorbereiten<br />
* blaue Werkzeugkästen wieder aufbauen und an die Wand schrauben<br />
** Gewindestangen (6 Stk M10) einkaufen<br />
** grünen Kasten dort entfernen (→zem), grünen Werktisch auch (sobald Drehbank geklärt)<br />
* Geschlossenes Fenster: nochmal schleifen, streichen (welche Farbe?)<br />
<br />
== Mittlere Dringlichkeit ==<br />
<br />
* Stromumbau (→Zwax/Hobbes)<br />
** Steckdosen für bessere Erreichbarkeit versetzen<br />
** Starkstromdosen an die richtigen Stellen<br />
** Sicherungskasten bei Tür mit Not-Aus und extra-Sicherungskreis für Geräte mit fragwürdigem Kurzschlussverhalten<br />
** Platz für blauen Werkzeugkasten machen<br />
* LAN-Dosen in der PC-Ecke (→reox/albert)<br />
* Kaminprüfung mit Rauchfangkehrer für Abluftumwidmung, im Zuge dessen auch Genehmigung für Niederführung von Antennenkabeln einholen (abklären mit Metalab)<br />
** Lüftungsbau<br />
* Holzkonstruktion im linken Eck<br />
** Kabelausparung wandseitig Kanten abrunden (Unter- und Oberseite) mit der Oberfräse (→Oliver)<br />
** Plane reinigen, zuschneiden und montieren<br />
* Regale für über der Drehbank bauen (→Oliver)<br />
** Latten 5x8cm dafür aus den Brettern sägen<br />
* neue Plätze für Erste-Hilfe-Kasten und Schraubzwingen finden<br />
* Gerätekasten für unter dem Klapptisch bauen<br />
* blauen Kasten ausräumen bzw. abklären (Finger weg von Funkamateursachen)<br />
** evtl. aus der Heavy Machinery los werden? Wenn wir eine ordentliche Standbohrmaschine bekommen, wäre das ein geeigneter Platz.<br />
* weiteren Zwischenboden in der anderen Hälfte einziehen? (diskutieren, →Oliver)<br />
* Gummimatten (Angebote einholen)<br />
* Standfläche für Schlagschere, mit Werkbank verbunden<br />
* CNC-Tisch und Käfig (→chrysn)<br />
** alten Käfig zerlegen, in Brauchbares und Unbrauchbares sortieren<br />
** Käfigtüren planen<br />
** CNC wieder einbauen und aufsetzen<br />
** Parallelportkarte und Floppy-Kartenleser kaufen<br />
** CNC-Tisch planen<br />
* Licht in Zerspanungsecke (Käfig, Arbeitsplatz, Drehbank)<br />
** Leuchtstoffröhre kaufen: 120cm, Starter ist FS-11 F4W 65W, F80W, CF18W..36W<br />
<br />
== Long term ==<br />
<br />
* Rollwagen für Stangenmaterial für neben CNC<br />
* Fläche vor dem linken, geschlossenen Fenster nutzen – Regale (→Oliver)<br />
* Metallwerktisch zumachen, damit drinnen Geräte gelagert werden können (→Enzi, klären mit Benko)<br />
* CNC verbessern<br />
** 4. Achse<br />
** ATC<br />
** Touchprobe<br />
* Schweißervorhang, falls gleichzeitig geflext und zerspant werden soll, Angebote einholen</div>
Chrysn
https://metalab.at/wiki/index.php?title=2012-03-29_Jour_Fixe&diff=41231
2012-03-29 Jour Fixe
2012-03-29T10:34:31Z
<p>Chrysn: bericht ueber werkstatt angekuendigt</p>
<hr />
<div>Bei den Jours Fixes trifft sich das (nicht klar abgegrenzte) Orga-Team um laufende Entwicklungen und zukünftige Projekte zu besprechen. Alle Mitglieder, die konkret mithelfen wollen und können, sind eingeladen nach eigenem Ermessen mitzumachen.<br />
<br />
== Zeit ==<br />
Donnerstag '''2012-03-29, 19:'''<s>30 </s>'''00'''<br />
<br />
== Organisatorisches ==<br />
# Schriftführer bestellen<br />
# Moderator bestellen<br />
<br />
== Berichte ==<br />
# [[Werkstatt2.0]] ([[Benutzer:Hobbes|Hobbes]] / [[Benutzer:chrysn|chrysn]])<br />
# ..<br />
<br />
== Themen ==<br />
# Bitcoin — Andreas<br />
# ..<br />
<br />
== Do Fixe ==<br />
# ..<br />
<br />
<br />
[[Kategorie:Protokolle]]<br />
[[Kategorie:Jour Fixe]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=Werkstatt/2.0/ToDo&diff=41211
Werkstatt/2.0/ToDo
2012-03-27T01:19:47Z
<p>Chrysn: /* Mittlere Dringlichkeit */ erweiterung cnc</p>
<hr />
<div>Die Einkaufsliste an Ergänzungen für die Werkstatt ist als [[Werkstatt2.0/Einkaufsliste|Einkaufsliste]] angelegt.<br />
<br />
== Hohe Dringlichkeit ==<br />
<br />
* Elektrowerkzeuge<br />
** Funktionalität und Sicherheit prüfen<br />
** reinigen<br />
** in blauen Kasten vor Fenster einsortieren (in erster Linie in den unteren der beiden blauen Holzkästen im Fenster)<br />
** katalogisieren (Fotos)<br />
** Unbrauchbares sammeln und zur Abholung / Entsorgung vorbereiten<br />
* blaue Werkzeugkästen wieder aufbauen und an die Wand schrauben<br />
** Gewindestangen (6 Stk M12) einkaufen<br />
** grünen Kasten dort entfernen (→zem), grünen Werktisch auch (sobald Drehbank geklärt)<br />
* Geschlossenes Fenster: nochmal schleifen, streichen (welche Farbe?)<br />
<br />
== Mittlere Dringlichkeit ==<br />
<br />
* Stromumbau (→Zwax/Hobbes)<br />
** Steckdosen für bessere Erreichbarkeit versetzen<br />
** Starkstromdosen an die richtigen Stellen<br />
** Sicherungskasten bei Tür mit Not-Aus und extra-Sicherungskreis für Geräte mit fragwürdigem Kurzschlussverhalten<br />
** Platz für blauen Werkzeugkasten machen<br />
* LAN-Dosen in der PC-Ecke (→reox/albert)<br />
* Kaminprüfung mit Rauchfangkehrer für Abluftumwidmung, im Zuge dessen auch Genehmigung für Niederführung von Antennenkabeln einholen (abklären mit Metalab)<br />
** Lüftungsbau<br />
* Holzkonstruktion im linken Eck<br />
** Kabelausparung wandseitig Kanten abrunden (Unter- und Oberseite) mit der Oberfräse (→Oliver)<br />
** mit belastbarem Lack versiegeln (Arbeitsfläche, Tische, Regalflächen) (→reox)<br />
** Plane reinigen, zuschneiden und montieren<br />
* Regale für über der Drehbank bauen (→Oliver)<br />
** Latten 5x8cm dafür aus den Brettern sägen<br />
* neue Plätze für Erste-Hilfe-Kasten und Schraubzwingen finden<br />
* Gerätekasten für unter dem Klapptisch bauen<br />
* blauen Kasten ausräumen bzw. abklären (Finger weg von Funkamateursachen)<br />
** evtl. aus der Heavy Machinery los werden? Wenn wir eine ordentliche Standbohrmaschine bekommen, wäre das ein geeigneter Platz.<br />
* weiteren Zwischenboden in der anderen Hälfte einziehen? (diskutieren, →Oliver)<br />
* Gummimatten (Angebote einholen)<br />
* Standfläche für Schlagschere, mit Werkbank verbunden<br />
* CNC-Tisch und Käfig (→chrysn)<br />
** alten Käfig zerlegen, in Brauchbares und Unbrauchbares sortieren<br />
** Käfigtüren planen<br />
** CNC wieder einbauen und aufsetzen<br />
** Parallelportkarte und Floppy-Kartenleser kaufen<br />
** CNC-Tisch planen<br />
* Licht in Zerspanungsecke (Käfig, Arbeitsplatz, Drehbank)<br />
** Leuchtstoffröhre kaufen: 120cm, Starter ist FS-11 F4W 65W, F80W, CF18W..36W<br />
<br />
== Long term ==<br />
<br />
* Rollwagen für Stangenmaterial für neben CNC<br />
* Fläche vor dem linken, geschlossenen Fenster nutzen – Regale (→Oliver)<br />
* Metallwerktisch zumachen, damit drinnen Geräte gelagert werden können (→Enzi, klären mit Benko)<br />
* CNC verbessern<br />
** 4. Achse<br />
** ATC<br />
** Touchprobe<br />
* Schweißervorhang, falls gleichzeitig geflext und zerspant werden soll, Angebote einholen</div>
Chrysn
https://metalab.at/wiki/index.php?title=Werkstatt/2.0/Lost%26Found&diff=41210
Werkstatt/2.0/Lost&Found
2012-03-27T00:52:31Z
<p>Chrysn: weiteres zeugs fuer die kiste</p>
<hr />
<div>Folgendes ist bislang in der Werkstatt2.0-Lost&Found-Kiste gelandet. Der Inhalt der Kiste wird per 1. Mai entsorgt; wer Teile davon für rettenswert hält, möge diese entnehmen und verstauen (nicht in der Werkstatt).<br />
<br />
* Fahrradpumpen, diverse, 3 Stk.<br />
* Motherboard einer NSLU2<br />
* NiMH-Modellbau-Akkus<br />
* lange schwarze Kabel mit BNC-Konnektoren (beschriftet mit "Public Netbase", uU Oszi-Kabel)<br />
* PCA9555-Chips, SMD, 4 Stk.<br />
* Breakout-Boards (für selbige?), 1 Platine im Neunfachnutzen<br />
* rote Weste mit weißen Streifen, Aufschrift FIAT<br />
* schwarze Jean<br />
<br />
Nicht in der Kiste, der gleichen Handhabung unterworfen:<br />
<br />
* SMD-Griller (noch im blauen Holzkasten)</div>
Chrysn
https://metalab.at/wiki/index.php?title=Werkstatt/2.0&diff=41209
Werkstatt/2.0
2012-03-27T00:46:32Z
<p>Chrysn: /* Protokolle */ lost&found verlinkt</p>
<hr />
<div>Hier soll alles zusammengefasst werden, was mit dem Remake der [[Werkstatt]] zu tun hat.<br />
<br />
Die laufende Kommunikation zu dem Thema wird [https://lists.metalab.at/mailman/listinfo/cnc auf der CNC-Mailinglist] [mailto:cnc@lists.metalab.at cnc@lists.metalab.at] abgewickelt.<br />
<br />
== Protokolle ==<br />
<br />
* [[Werkstatt2.0/20120214|Meeting 14.02.2012]]<br />
* [[Werkstatt2.0/20120228|Meeting 28.02.2012]]<br />
* [[2012-03-01_Jour_Fixe#Zerspanungstechnik_.28Heavy_Machinery.29|Jour Fixe 01.03.2012]]<br />
* [[Werkstatt2.0/20120317|Umbauphase 17. bis 18. 3. 2012]]<br />
* [[Werkstatt2.0/20120321|Umbauten 21. 3. 2012]]<br />
* [[Werkstatt2.0/20120326|Arbeiten 26. 3. 2012]]<br />
<br />
Die Protokolle werden aus Erledigungen der [[Werkstatt2.0/ToDo|ToDo-Liste]] gefüllt.<br />
<br />
Alles, was in der Werkstatt noch herumgelegen ist, ist in [[Werkstatt2.0/Lost&Found]] aufgeführt und harrt in der entsprechenden Kiste der Abholung.<br />
<br />
== Links ==<br />
<br />
* [https://metalab.at/issues/ticket/15 Issue 15 im Metalab-trac] dokumentiert, dass Handlungsbedarf nicht nur von "uns" gesehen wird<br />
<br />
== Händler / Stuff ==<br />
<br />
* Mir wurde [http://www.spiral.at Spiral] als guter Händler für Werkzeug / Zubehör in Wien genannt --[[Benutzer:Reox|Reox]] 23:54, 3. Mär. 2012 (CET)<br />
* Spiral hat zwar Fräser, aber keine kleinen. Die bekommt man bei [http://www.guehring.de Gühring], hat auch eine Filiale in Wien - sind aber rel. teuer --[[Benutzer:Reox|Reox]] 13:34, 7. Mär. 2012 (CET)<br />
* Händler für Fräser etc: [http://www.as-toolstore.de/ AS-Toolstore]<br />
<br />
== Kooperationen ==<br />
Es wurde vorgeschlagen mit Bildungsinstituten zu kooperieren und zB HTL's die keine geeignete Technische Ausrüstung haben den Raum & Maschinen zur verfügung zu stellen um an neue Werkzeuge zu kommen. Beispiel: Maschinenbau HTL fräst und einen Werkzeugswechsler als Diplomarbeit; HTL baut was für uns und darf als Gegenleistung Lasercutter verwenden oder Know-How von uns erhalten (Informatik zB).<br />
<br />
Unter Umständen gute Kooperationspartner, sollte man zumindest mal fragen<br />
* Institut für Fertigungstechnik und Hochleistungslaser TU Wien: [http://www.ift.at]<br />
* HTL Schulzentrum Ungargasse [http://www.szu.at]<br />
* TGM [http://www.tgm.ac.at]<br />
* HTL Spengergasse<br />
* ...<br />
<br />
[[Kategorie:Räume]]<br />
[[Kategorie:WhateverLab]]<br />
[[Kategorie:Werkstatt]]</div>
Chrysn
https://metalab.at/wiki/index.php?title=Werkstatt/2.0/Lost%26Found&diff=41208
Werkstatt/2.0/Lost&Found
2012-03-27T00:46:24Z
<p>Chrysn: kiste angelegt</p>
<hr />
<div>Folgendes ist bislang in der Werkstatt2.0-Lost&Found-Kiste gelandet. Der Inhalt der Kiste wird per 1. Mai entsorgt; wer Teile davon für rettenswert hält, möge diese entnehmen und verstauen (nicht in der Werkstatt).<br />
<br />
* Fahrradpumpen, diverse, 3 Stk.<br />
* Motherboard einer NSLU2<br />
* NiMH-Modellbau-Akkus<br />
* lange schwarze Kabel mit BNC-Konnektoren (beschriftet mit "Public Netbase", uU Oszi-Kabel)<br />
* PCA9555-Chips, SMD, 4 Stk.<br />
* Breakout-Boards (für selbige?), 1 Platine im Neunfachnutzen</div>
Chrysn