PacmanCaster

PacmanCaster
Gestartet:	23.5.2018
Involvierte:	User:amir
Status:	in progress
Beschreibung:	Building a DIY e-guitar in PacMan style
Shutdownprozedur:
Zuletzt aktualisiert:	2020-05-24

WTF

This project page is about building a DIY electric guitar in PacMan style. Pickup-, control- and neck design are copied from a Telecaster guitar. We are going to use the CNC mill to create the body. This page is about the e-guitar i built. :)

30 Essential items for building and assembling a guitar body

The following list of items is what _I_ found to be essential for building a guitar body in a timely fashion. You might be able to do it with a completely different stack or simply less items.

1. Wood
2. A CNC router
3. A long mill bit with 6 or less mm diameter (rounding radius of <= 3) that works all the way through 45 mm thick wood
4. A sanding block
5. Sanding paper 40-5000 grit
6. A router table (can be easily constructed from a template router)
7. An orbital sander (well, not strictly necessary but it safes lots and lots of time)
8. An oscillating belt and spindle sander. (also a huge time safer)
9. A band saw (you can easily find your way around this one, but it's a huge comfort)
10. Wood drill set
11. Metal drill set
12. Screw driver set
13. A set of hex keys
14. A wire cutter
15. A solder iron
16. Solder tin
17. Guitar electronics
18. Gavitt Wire
19. A multimeter
20. Shielding tape
21. An air brush
22. A wood primer that also acts as a filler
23. Compatible paint
24. Compatible lacquer
25. Car polish
26. Rubber (nitril) gloves
27. Masking tape
28. Forstner bits
29. Milling bits with a thrust ring for the router table
30. Respirator mask

Images Speak Louder Than Words

But videos are clearly louder

That is a video of the pacmancaster before adjusting neck, bridge and pickups. Let's see if i can get it right on my own. Stay tuned.

https://vimeo.com/301905261

---

The following previews are out of date but i guess you get the idea. Check out the image and video above

Design Preview

CAM Preview

Lessions learned

The following "lessions learned" reflect my current level of knowledge which might be not very high :)

• It seems like if the neck is good, the bridge in alignment and the body follows some simple rules - you get a good guitar.
• the body design has to adhere to following rules for a good sound:

1. If you do a solid body design avoid large cavities, especially under the pick guard.
2. Avoid destabilizing the body in the neck axis.
3. You can tune the guitars resonance frequency by removing material (but how much depends on where you remove material. Removing material inline with the neck has the greatest effect)
4. The neck pocket needs to be perfectly in alignment and fit. Sound waves need to pass freely between neck and body.

• Unless you are very skilled you should at least CNC the neck pocket.
• If you mill a very deep profile you run into risk of getting the milling head stuck. Instead make a circular pocket (following the profile) about 1.5x the mill size (and adjust your step over accordingly). That way you'll create a profile that will be milled by two circular operations (they should partially overlap) per step down. Also vacuum thoroughly all the time and try to find settings that avoid long chips.
• Certified mahogany is a real nice material for milling but hard to get the paint job right. Pretty homogeneous (nice for milling) on the one hand and on the other with large pores (not nice for the paint job). Ripper told me about a filler material you can use to smooth it out and apparently Gibson does it that way because they mention it in a YouTube video pk sent me.
• The following videos pk sent me are very interesting, not only because the reveal methodology but also because it pictures the industry.

1. https://www.youtube.com/watch?v=nu6wCqqPkew
2. https://www.youtube.com/watch?v=uVU86GGV07A
3. https://www.youtube.com/watch?v=VbU1R4KDymw

• The 2 first passes of sanding the wood right before painting are the most important ones. Yeah i know it's pretty common knowledge but I want to remind myself and maybe others to do it properly.
• Do the first pass in direction of the grain. Do the second pass orthogonal to the grain, and water the wood first.
• There are dedicated sanding liquids. I want to get some and compare it to using just water.
• There is a ton of dedicated tools for even the smallest things. Get some.
• Metalab doesn't have the space and tools for a real high quality finish.
• Pockets are hard to sand and paint. Rather us engravings for visual effects.
• Steep concavities on the profile of the body are a real challenge to sand and paint.
• Building a high quality neck is some next level stuff but building a high quality body is not that hard
• Banding e-guitars is only done for aesthetic reasons.
• Use sand paper to "cut" masking tape at edges of the workpiece
• High-end guitars use shielding tape in all the electronics hodling pockets.
• Don't believe any guitar myths you haven't checked. especially when it comes to acoustics and electro-acoustics. the music-tech world is full of esoterics.
• There is a myth that says that the bigger/heavier the solid body is, the more sustain you get. I tested this one by cutting (a failed but functional) version of the guitar step by step down to the bare mininum. At the end the difference in sustain was still marginal while the weight difference was huge. No reason for uncomfortably heavy guitars. also, other qualities of the sound (spectrum, loudness, etc..) only change slightly. So having some meat on the guitar is a good thing while it doesn't justify building back-breakers.

Ideas

• Build a unibody guitar. neck and body out of one piece
• Enhance the guitar with electronics. e.g.:

1. Decorate with addressable LEDs
2. Add an equalizer and maybe other analog effects. Or maybe build and use external effects processors to tune the guitar to a specific sound and than integrate those effects with fixed settings hidden in the guitar
3. Use LEDs on the fretboard for learning (see: http://www.fretzealot.com. But do it better
4. Built-in recording to sdcard?

• Build an aluminum (or maybe steel?) guitar with a slight spring effect in neck axis. make that "spring" adjustable in hardness as well as resonance frequency.
• Tune the pickups by attaching an electromagnet to each of the poles and manipulate magnetic strength individually

Checklist

1. Mill the guitar on the cnc.
2. Cut the remainders away.
3. Drill all holes
4. Sand the workpiece completely. 40, 80, 120, 180, 240.
5. Work edges with the template router
6. Carefully sand the edges
7. Wet the wood and wait for it to dry
8. Hang the guitar by a thread
9. Prime the workpiece 3 times
10. Wet-sand with 400
11. Paint the workpiece 3 times
12. Wet-sand with 400
13. Apply lacquer 2 times
14. Wet-sand with 600
15. Apply lacquer 2 times
16. Wet-sand with 600
17. Apply lacquer 3 times
18. Wet-sand with 600, 1200, 2000
19. Polish the workpiece

Shopping List

ASAP

1. 007.99€ 1x Rubber gloves
2. 011.99€ 1x Car polish
3. 010.99€ 1x Wax paper
4. 008.78€ 1x Gavitt Wire
5. 020.00€ 1x Aluminum plate for the construction of a table router
6. 008.99€ 1x Shielding tape
7. 029.98€ 2x Guitar screw kit
8. 221.79€ 1x Oscillating belt and spindle sander
9. 081.12€ 1x Long milling bit
10. 140.00€ 2x Corpus wood
11. 116.78€ 1x Band saw
12. 090.92€ 1x Airbrush set small
13. 040.99€ 1x Airbrush set big
14. 030.00€ 2x Guitar Strings
15. 020.97€ 3x Protective suite
16. 062.28€ 1x Filter pads
17. 600.00€ 2x Used Telecaster

Some Day

1. https://www.stewmac.com/Luthier_Tools/Tools_by_Job/Tools_for_Electronics_and_Pickups/Pickup_building/Mojotone_Pickup_Winding_Machine.html
2. https://www.stewmac.com/Luthier_Tools/Tools_by_Job/Tools_for_Fretting/Essential_Fretting_Tool_Set.html
3. https://www.stewmac.com/Luthier_Tools/Tools_by_Job/Tools_for_Fretting/Fret_Arbor_Press_System.html