HSC2011/Building your own EduBuzzer

aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Zur Navigation springenZur Suche springen

< HSC2011

In order to build an EduBuzzer, you'll need

  • equipment for etching a two sided PCB (as an alternative, you can order it just as well -- we didn't etch ours),

    equipment for etching a two sided PCB (as an alternative, you can order it just as well -- we didn't etch ours),

  • a rapid prototyper (3D printer, e.g. a makerbot),

    a rapid prototyper (3D printer, e.g. a makerbot),

  • a lasercutter for cutting 5mm transparent acryl sheet (if unavailable, a rapid prototyper with transparent substrate will work as well),

    a lasercutter for cutting 5mm transparent acryl sheet (if unavailable, a rapid prototyper with transparent substrate will work as well),

  • soldering equipment,

    soldering equipment,

  • screws with driver (what made you guess our hardware design is not 100% finished in that part?),

    screws with driver (what made you guess our hardware design is not 100% finished in that part?),

  • a programmer for AVR microcontrollers (any AVR microcontroller with a bootloader will do, especially an Arduino -- c.f. the Arduino ISP tutorial) with appropriate software, e.g. avrdude,

    a programmer for AVR microcontrollers (any AVR microcontroller with a bootloader will do, especially an Arduino -- c.f. the Arduino ISP tutorial) with appropriate software, e.g. avrdude,

  • and a copy of the EduBuzzer software and hardware description from the project download page.

    and a copy of the EduBuzzer software and hardware description from the project download page.

Abgerufen von „https://metalab.at/alpakaparty/index.php?title=HSC2011/Building_your_own_EduBuzzer&oldid=37044“