aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Zur Navigation springenZur Suche springen
Hardware
RouterBOARD 153 - Embedded System
| Manufacturer
|
MikroTik
|
| Product Page
|
http://www.routerboard.com/rb100.html
|
| Distributor
|
http://www.evonet.at/mikrotik/catalog/index.php?cPath=24
|
| CPU
|
MIPS32 4Kc, 175MHz embedded
|
| Memory
|
32MB SDRAM
|
| Boot loader
|
RouterBOOT, 1Mbit Flash chip
|
| Data storage
|
64MB onboard NAND memory chip
|
| Ethernet ports
|
Five 10/100 Mbit ethernet ports supporting Auto MDI/X
|
| MiniPCI slot
|
Three miniPCI Type IIIA/IIIB slots
|
| Speaker
|
present
|
| Serial ports
|
One DB9 RS232C asynchronous serial port
|
| LEDs
|
Power, 3 LED pairs for MiniPCI slots, 1 user LED
|
| Power options
|
11..60V DC - power jack or IEEE802.3af Power over Ethernet (12V / 48V DC, including power over datalines)
|
| Power Out
|
Two 3V DC power output headers (only one populated by default), maximal output current - 500mA total
|
| Power Consumption
|
3-4W without extension cards. Maximum 13W
|
| Dimensions
|
160mm x 160mm (6.3in x 6.3in)
|
| Weight
|
183g (6.5oz)
|
| Temperature
|
Operational: -20°C to +70°C (-4°F to 158°F)
|
| Humidity
|
Operational: 70% relative humidity (non-condensing)
|
| Supported OS
|
RouterOS, GNU/Linux
|
| Documentation
|
Users Manual Startup Guide
|
| Unit Dimensions
|
PDF DXF
|
| Case Dimensions
|
PDF DXF
|
| Firmware Upgrade
|
2.8 Changes
|
|
|
RouterBOARD R52 - 2.4/5GHz 802.11a+b+g Wireless Mini-PCI Card
|
SanDisk 1.0 GB CompactFlash
EUR 19,90 (kleinere Memory Card gabs beim nahen Niedermeyer nicht)
|
|
Passendes Gehäuse PC 21/18-FC3 für Routerboard
- robuster ABS Kunststoff
- Schutzart: IP 65
- (B x H x T) 185 x 213 x 102 mm
|
|
Panel Antenne Ant 16 bg Set
Omnidirektionale Antenne
Pig-Tails
- 3 x 1,5 m HDF 200 Low Loss Antennenkabel 0,54 dB / m @ 2,4 GHz
- mit je 2 Stk. N ST HDF 200 C N-Stecker Crimp-Version
|
|
|
Software
