Fonera

FLASHING

Mac OS X

Since EasyFlash isn't available for Max OS X, we do this manually (FON2200 + ethernet only):

1. Set IP address of your Mac:

sudo ifconfig en0 192.168.1.254

2. Enable tftp

Either temporarily enable tftpd serving files from /private/tftpboot/:

sudo launchctl load -F /System/Library/LaunchDaemons/tftp.plist

..or permanently enable tftpd serving files from custom directory:

tftpserver config in /System/Library/LaunchDaemons/tftp.plist

disabled auf false
directory auf irgendein worldreadable dir
$sudo launchctl
load -F /System/Library/LaunchDaemons/tftp.plist
start com.apple.tftpd

3. Copy OpenWRT files to tftp dir:

These files are typically what you want to use:

openwrt-atheros-2.6-vmlinux.lzma
openwrt-atheros-2.6-root.squashfs

4. Get access to the RedBoot bootloader:

echo -e "\003" > break

fonera an den strom, wenn das 2te led zu blinken beginnt:

nc -vvv 192.168.1.1 9000 < break;

danach ctrl+c

telnet 192.168.1.1 9000

-> You should now have a "RedBoot>" prompt. If not, rince and repeat.

5. Flash new kernel and filesystem images in RedBoot:

In RedBoot:

fis init
load -r -b 0x80041000 openwrt-atheros-2.6-vmlinux.lzma
fis create -e 0x80041000 -r 0x80041000 vmlinux.bin.l7
load -r -b 0x80041000 openwrt-atheros-2.6-root.squashfs
fis create -l 0x06F0000 rootfs

6. Reboot

You are now where EasyFlash ends. Wait for the boot to finish and telnet to 192.168.1.1 and set a root password.

Windows/Linux (easyflash):

http://downloads.berlin.freifunk.net/fonera/

[ ]	ap51-flash-fonera-1.0-38	18-Dec-2007 19:10 	3.3M
[ ]	ap51-flash-fonera-gui-1.0-38.exe	18-Dec-2007 19:12 	3.3M

Passendes Tool runterladen.


http://downloads.openwrt.org/kamikaze/7.09/atheros-2.6/
 [   ] openwrt-atheros-2.6-root.jffs2-64k                 30-Sep-2007 20:16  1.6M  
 [   ] openwrt-atheros-2.6-vmlinux.lzma                   30-Sep-2007 20:16  768K   

die beiden runterladen.



Jetzt kommts..
1. Fonera mit ETHERNETKABEL an eth0 anstecken.
2. ./ap51-flash-fonera-1.0-38 eth0 openwrt-atheros-2.6-root.jffs2-64k  openwrt-atheros-2.6-vmlinux.lzma 
3. Strom an den Fonera anstecken 


Der Fonera schickt nun beim hochfahren einen ARP request raus, das Flashtool wartet darauf und tut dann seine Magie.
Der ganze Flashvorgang dauert rund _15_ Minuten.
Zuerst sieht man die IP vom Router 
Dann steht da was von 
Loading RootFS ..
Writing RootFS..  (10 Minuten)
Loading Kernel ..
Writing Kernel.. 
Rebooting Device..


Fertig.

Danach hat der Fonero die IP 192.168.1.1 und ist über TELNET erreichbar.
Happy hacking.