Ctrl-Cut: Unterschied zwischen den Versionen

← Zum vorherigen Versionsunterschied Zum nächsten Versionsunterschied →

VisuellWikitext

@@ Zeile 27: / Zeile 27: @@
 === Apr 02 ===
 I haven't found the motivation yet to actually call the support, but there is progress anyway. we now have a nice setup to intercept and analyse serial communication between the driver and the laser cutter. But for now we stopped working on reverse engineering and decided to actually fire the machine up. We figured out cutting wood and [[User:pwnschlager|pwnschlager]] did put a lot of effort into figuring out how to create a decent engraving on cheap plywood.
-[[Datei:Lc spiral.jpg|mini|left|Our first successful cut]]
+[[Datei:Lc spiral.jpg|left|mini|Our first successful cut]]
-[[Datei:Lc engrave.jpg|mini|the best engraving result by now]]
+[[Datei:Lc engrave.jpg|left|mini|the best engraving result by now]]
+[[Datei:cb.jpg|left|mini|The circuit breaker in the antechamber can't handle the laser cutter and companion devices]]
-Anyway using the laser turned out to be much harder than we expected and we want to share a few of the caveats we encountered:
+[[Datei:Lc reset button.jpg|left|mini|After the laser cutter boots it is always in emergency stop mode. you need to press the "reset" button so that the laser cutter accepts jobs again. of course you also have to do that when you actually used the emergency stop.]]
+[[Datei:Lc rotary mode.jpg|left|mini|If you can't seem to get the y-axis to move the laser probably is in rotary mode. in that mode it is possible to work with cylindrical objects by turning the object under the fixed y-axis. you can disable rotary mode by flipping the "Axis U/Axis Y" switch.
-===== the circuit breaker in the antechamber can't handle the laser cutter and companion devices =====
+]]
+[[Datei:Lc work settings.png|left|mini|You need to enable the "Output direct" flag in the work settings of the driver or light tones won't be engraved at all]]
-===== It won't accept any jobs and the red light is on =====
-After the laser cutter boots it is always in emergency stop mode. you need to press the "reset" button so that the laser cutter accepts jobs again. of course you also have to do that when you actually used the emergency stop.
-[[Datei:Lc reset button.jpg|mini|left|The "emergency-reset" button]]
-===== Y-Axis won't move =====
-If you can't seem to get the y-axis to move the laser probably is in rotary mode. in that mode it is possible to work with cylindrical objects by turning the object under the fixed y-axis. you can disable rotary mode by flipping the "Axis U/Axis Y" switch.
-[[Datei:Lc rotary mode.jpg|mini|left|the rotary mode switch]]
-===== Light tones won't be engraved at all =====
-You need to enable the "Output direct" flag in the work settings of the driver
-[[Datei:Lc work settings.png|left|mini|Work Settings]]
 [[Kategorie:Lazzzor]]
 [[Kategorie:Projekte]]