Ctrl-Cut: Unterschied zwischen den Versionen

← Zum vorherigen Versionsunterschied Zum nächsten Versionsunterschied →

VisuellWikitext

@@ Zeile 26: / Zeile 26: @@
 ===== It won't accept any jobs and the red light is on =====
-[[Datei:Lc reset button.jpg|mini|The "emergency-reset" button]] After the laser cutter boots it is always in emergency stop mode. you need to press the "reset" button so that the laser cutter accepts jobs again. of course you also have to do that when you actually used the emergency stop.
+After the laser cutter boots it is always in emergency stop mode. you need to press the "reset" button so that the laser cutter accepts jobs again. of course you also have to do that when you actually used the emergency stop.
+<br>
+[[Datei:Lc reset button.jpg|mini|left|The "emergency-reset" button]]
@@ Zeile 44: / Zeile 52: @@
 ===== Y-Axis won't move =====
-[[Datei:Lc rotary mode.jpg|mini|the rotary mode switch]] If you can't seem to get the y-axis to move the laser probably is in rotary mode. in that mode it is possible to work with cylindrical objects by turning the object under the fixed y-axis. you can disable rotary mode by flipping the "Axis U/Axis Y" switch.
+If you can't seem to get the y-axis to move the laser probably is in rotary mode. in that mode it is possible to work with cylindrical objects by turning the object under the fixed y-axis. you can disable rotary mode by flipping the "Axis U/Axis Y" switch.
+[[Datei:Lc rotary mode.jpg|mini|left|the rotary mode switch]]
 ===== Light tones won't be engraved at all =====
-You need to enable the "Direct output" flag in the work settings of the driver
+You need to enable the "Output direct" flag in the work settings of the driver
 [[Kategorie:Lazzzor]]
 [[Kategorie:Projekte]]