CNC-Fräse: Unterschied zwischen den Versionen
Reox (Diskussion | Beiträge) |
Ripper (Diskussion | Beiträge) K Parameter für Alu, xBox controller hinweis |
||
| Zeile 39: | Zeile 39: | ||
=== Start Up === | === Start Up === | ||
# Start CNC PC (do not turn on the G4 (The "G4 Case" stepper control thing), neither the VFD) | # Start CNC PC (do not turn on the G4 (The "G4 Case" stepper control thing), neither the VFD) | ||
# Start LinuxCNC | # Start LinuxCNC, make sure the X-Box controller is plugged in, otherwise starting the LinuxCNC doesn't work | ||
## If you are using the T-notch plate, choose the Shortcut "Geil-O-Mat starten (T-Nut Platten, Z Limit 107mm)" | ## If you are using the T-notch plate, choose the Shortcut "Geil-O-Mat starten (T-Nut Platten, Z Limit 107mm)" | ||
## Otherwise choose "Geil-O-Mat starten (Z Limit 112.5mm)" which has extra 5.5mm Z-Axis travelling distance | ## Otherwise choose "Geil-O-Mat starten (Z Limit 112.5mm)" which has extra 5.5mm Z-Axis travelling distance | ||
| Zeile 239: | Zeile 239: | ||
|- | |- | ||
| Aluminium || 6 || 0.25 || 6mm || 10000 || 650 || Zweischneider, schleppend und ziehender schnitt - no external cooling | | Aluminium || 6 || 0.25 || 6mm || 10000 || 650 || Zweischneider, schleppend und ziehender schnitt - no external cooling | ||
|- | |||
| Aluminium || 4 || 0.25 || 6mm || 14000 || 850 || Dreischneider, Wassergekühlt, leicht raue Oberfläche | |||
|- | |- | ||
| Brass (Messing) || 2 || 0.25 || 50% || 24000 || 960 || Zweischneider - no external cooling | | Brass (Messing) || 2 || 0.25 || 50% || 24000 || 960 || Zweischneider - no external cooling | ||