Kinky Stardust (Acoustic Guitar Pickup): Unterschied zwischen den Versionen
Amir (Diskussion | Beiträge) |
Amir (Diskussion | Beiträge) Keine Bearbeitungszusammenfassung |
||
| Zeile 39: | Zeile 39: | ||
After some experiments i build a pickup to the above AES design and step by step came up with three major modifications (which actually make my pickup work very differently compared to an AES - but anyway it was my starting point): | After some experiments i build a pickup to the above AES design and step by step came up with three major modifications (which actually make my pickup work very differently compared to an AES - but anyway it was my starting point): | ||
# There is no couplant and the wear plate doesn't directly touch the object. Instead i left an air cushion of about a 1.5 centimeters between them. Note that the chamber between object and case is airtight. | # There is no couplant and the wear plate doesn't directly touch the object. Instead i left an air cushion of about a 1.5 centimeters between them. Note that the chamber between object and case is airtight. | ||
# I also introduced a gap (about 3mm) between the backside of the piezo element and the dampening material and drilled a small hole (~ 1mm) in the dampening material, so that the backside | # I also introduced a gap (about 3mm) between the backside of the piezo element and the dampening material and drilled a small hole (~ 1mm) in the dampening material, so that the backside pocket is not airtight. | ||
pocket is not airtight. | # I used hard rubber as case material (i tried metal first). | ||
# I used hard rubber as case material. | |||
===== Theories™ ===== | ===== Theories™ ===== | ||