CNC-Fräse: Unterschied zwischen den Versionen
Reox (Diskussion | Beiträge) |
Reox (Diskussion | Beiträge) Keine Bearbeitungszusammenfassung |
||
| Zeile 313: | Zeile 313: | ||
* The dust of MDF is toxic. Use a vacuum (and respirator)! | * The dust of MDF is toxic. Use a vacuum (and respirator)! | ||
* Do not use to slow feed rate! MDF will burn easily. | * Do not use to slow feed rate! MDF will burn easily. | ||
24000 rpms are probably better, but at this speed the spindle makes a lot of noise. So i decided to use 18000 rpm, which worked quite well. Probably the feedrate could be higher with 24k, but the machine is already in the "orange" zone with 2000 mm/min. | |||
== Cutting Speed == | == Cutting Speed == | ||