CNC-Fräse: Unterschied zwischen den Versionen
Ripper (Diskussion | Beiträge) Added Brass |
Reox (Diskussion | Beiträge) |
||
| Zeile 224: | Zeile 224: | ||
|- | |- | ||
| MDF ||8||2||?||12000||30||MDF is usually too thick to be milled with our normal milling heads, so we're using a bigger (8mm diameter) end mill. Plunge 10. | | MDF ||8||2||?||12000||30||MDF is usually too thick to be milled with our normal milling heads, so we're using a bigger (8mm diameter) end mill. Plunge 10. | ||
|- | |||
| MDF || 6mm Z2 || 3 || 100% || 18000 || Feed 2000, Plunge 300 || Absaugen! Das Zeug ist ziemlich fein und nicht gut für die Lunge... | |||
|- | |- | ||
| Wood ||3||5||50%||12000-14000||>300|| guessed proposal | | Wood ||3||5||50%||12000-14000||>300|| guessed proposal | ||