Dome: Unterschied zwischen den Versionen

← Zum vorherigen Versionsunterschied Zum nächsten Versionsunterschied →

VisuellWikitext

@@ Zeile 6: / Zeile 6: @@
 * 250 bars (get 270+ to have some spareparts) the inner parts of slatted frames for beds work great
-* ?? M6 screws (length: ?? cm)
+* 91 M6 screws (length: 80 mm)
-* ?? Washers
+* 91 Wing nuts
-* ?? Wing nuts
+* 182 Washers (the bigger the better)
 * Spray paint (RED,GREEN,BLUE,ORANGE)
@@ Zeile 51: / Zeile 51: @@
 Drill a hole 2cm from the border in the middle of the struts ends.
-you need:
-start with 5 pcs type A struts (orange)
+==Assembly==
+Start with 5 pcs type A struts (orange)
 Connect them like this:
 WASHER, SCREW, 5 BARS (A),WASHER,WING NUT, dont over tighten yet
+You successfully put together the middle structure that will be on the center top of the dome.
-now from the end of these connect  5 type B struts.
+Now from the end of these connect  5 type B struts.
 The magic formular is:
@@ Zeile 67: / Zeile 69: @@
-MIDDLE (A)
+* MIDDLE (A)  outermost
-LEFT (B)
+* LEFT (B)      middle
-RIGHT(B)
+*RIGHT(B)     innermost layer
 and thats how you go on according to the diagram above.
-this is true for the whole assembly.
+This is true for the whole assembly.
+Take a corner of a triangle, consider that "middle" and connect left and right to it.
 ==Links==
 [http://www.domerama.com/calculators/4v-geodesic-dome-calculator/ DOMERAMA online dome calculator]
+== TODO==
+- on wiki
+--Add pictures
+--Add video of assembly
+- on dome
+-- measure the sizes of the different triangles / create different inlays with mirors and out of acrylic
+-- measure the top / center pentagon for replacement with solid wood
+-- add sprinklers for water
+-- add ventilator
+-- add 71 leds
+-- make ledmount