CNC-Fräse: Unterschied zwischen den Versionen

← Zum vorherigen Versionsunterschied Zum nächsten Versionsunterschied →

VisuellWikitext

@@ Zeile 273: / Zeile 273: @@
 * [http://www.pferd.com/at-de/101_DEA_HTML.htm yet another Drehzahlrechner]
-= Technical Foobar =
+= Technical Details =
 See this other Page for even more technical things: [[CNC-Fräse/Technical|CNC Mill Technical Stuff]]
-== Current Status==
-* Max-Movement speed is approx 2000 mm/min.
-* Homeing procedure in EMC is functional, and by that also soft-limits. Its now "nearly" impossible to move over some limits. Start EMC, turn machine on with f1/f2, press "home all", wait 30 sec. Than traverse to the wished zero of your working coordinate system, and touch off in all three axes.
-* The Spindle, aka the Mechatron, is switched on/off automatically.
-* Spindle speed must be set to a value between 6000 and 24000. Use GCode like M3 S6000
-** The Spindle needs some warmup before running. Manual says One minute on 6000rpm, then increase in steps of 6000 until the whished speed is reached. stay for one minute on each level. If the spindle is very cold and has not run about a week double the times!
-* Double sided boards kind of work, although its a bit tricky: [[PCB_CNC]]
-* The Historical Documents were moved here: [[Geil-o-mat/History|History of the famous Geil-o-mat, formerly known as CNC]]
-* The Whistlist, Todo stuff is now here: [[Geil-o-mat/Future|Future of Geil-o-mat]]
-== technical details ==
 A CNC mill like the dear Geil-O-Mat has three axis that can be moved independently. A spindle with a [http://de.wikipedia.org/wiki/Fr%C3%A4swerkzeug mill cutter] typically removes material.
 [[Bild:geilomat.jpg|thumb|400px|right|Some pink work in progress...]]