CNC-Fräse: Unterschied zwischen den Versionen
K spelling |
Reox (Diskussion | Beiträge) |
||
| Zeile 167: | Zeile 167: | ||
|- | |- | ||
| Wood ||0.8||4||100%||12000-14000||~250|| guessed proposal | | Wood ||0.8||4||100%||12000-14000||~250|| guessed proposal | ||
|- | |||
| Wood ||3||1.6||50%||12000||600|| looked good, material was plywood 8mm | |||
|- | |- | ||
| Aluminium || 6 || 0.25 || 6mm || 10000 || 1100 || Vierschneider, schleppender Schnitt - no external cooling | | Aluminium || 6 || 0.25 || 6mm || 10000 || 1100 || Vierschneider, schleppender Schnitt - no external cooling | ||