Blinkofant: Unterschied zwischen den Versionen
aus Metalab Wiki, dem offenen Zentrum für meta-disziplinäre Magier und technisch-kreative Enthusiasten.
Zur Navigation springenZur Suche springen
Zeile 13: | Zeile 13: | ||
* POUT EQU CENTRO ;the leftmost module will be connected to the POUT-port | * POUT EQU CENTRO ;the leftmost module will be connected to the POUT-port | ||
* | * ATTENTION! The bit positions must not be changed! | ||
Zeile 32: | Zeile 24: | ||
|- | |- | ||
| 1 | | 1 | ||
| | | data/clock ? comes back out here (rückleitung schebereigster) | ||
|- | |- | ||
| 2 | | 2 | ||
| | | data/clock ? comes back out here (rückleitung schebereigster) | ||
|- | |- | ||
| 3 | | 3 | ||
| | | DatLoad EQU 0 ;data bit for loading data and control data | ||
|- | |- | ||
| 4 | | 4 | ||
| | | ClkRing EQU 1 ;clock for shift left the whole line | ||
|- | |- | ||
| 5 | | 5 | ||
| | | ClkLoad EQU 2 ;clock for shift left & loading all selected modules | ||
|- | |- | ||
| 6 | | 6 | ||
| | | ClkBlink EQU 3 ;clock for blinking (0...off, 1...on) | ||
|- | |- | ||
| 7 | | 7 | ||
| | | ClkSteu EQU 4 ;clock for shift left & load control data from DatLoad | ||
|- | |- | ||
| 8 | | 8 | ||
| | | DatRing EQU 5 ;data bit for loading data during ClkRing | ||
|- | |- | ||
| 9 | | 9 | ||
| | | Reset EQU 6 ;clear all control data | ||
|- | |- | ||
| 10 | | 10 | ||
| | | OnOff EQU 7 ;turn on/off the whole display (0...off, 1...on) | ||
| turns off ALL the leds when pulled to ground | |||
|- | |- | ||
|} | |} |
Version vom 25. März 2012, 16:45 Uhr
WTF
Wir haben von der Eishalle Kagran eine RIESIGE rote LEDwall geschenkt bekommen.
Nun müssen die 90.000 pixel zum blinken gebracht werden.
Anbei die Doku
Doku der pins
- POUT EQU CENTRO ;the leftmost module will be connected to the POUT-port
- ATTENTION! The bit positions must not be changed!
- 8V, 5V, 12V, GND sind auf unseren boards NICHT bestückt mit pins.
pin number | function | |
1 | data/clock ? comes back out here (rückleitung schebereigster) | |
2 | data/clock ? comes back out here (rückleitung schebereigster) | |
3 | DatLoad EQU 0 ;data bit for loading data and control data | |
4 | ClkRing EQU 1 ;clock for shift left the whole line | |
5 | ClkLoad EQU 2 ;clock for shift left & loading all selected modules | |
6 | ClkBlink EQU 3 ;clock for blinking (0...off, 1...on) | |
7 | ClkSteu EQU 4 ;clock for shift left & load control data from DatLoad | |
8 | DatRing EQU 5 ;data bit for loading data during ClkRing | |
9 | Reset EQU 6 ;clear all control data | |
10 | OnOff EQU 7 ;turn on/off the whole display (0...off, 1...on) | turns off ALL the leds when pulled to ground |