CNC-Fräse: Unterschied zwischen den Versionen
Ra (Diskussion | Beiträge) heißt scho wish |
|||
| Zeile 41: | Zeile 41: | ||
* Homeing procedure in EMC is functional, and by that also soft-limits. Its now "nearly" impossible to move over some limits. Start EMC, turn machine on with f1/f2, press "home all", wait 30 sec. Than traverse to the wished zero of your working coordinate system, and touch off in all three axes. | * Homeing procedure in EMC is functional, and by that also soft-limits. Its now "nearly" impossible to move over some limits. Start EMC, turn machine on with f1/f2, press "home all", wait 30 sec. Than traverse to the wished zero of your working coordinate system, and touch off in all three axes. | ||
* The Spindle, aka the Kress, is switched on/off automatically. | * The Spindle, aka the Kress, is switched on/off automatically. | ||
** | ** This is done with the spindle buttons in EMC. However, on the physikal controller device onboard the geilomat cupboard, the relais switchs have to be turned off.They override the emc settings. | ||
* Build the first double-sided pcb, although with problems to misadjusting. | * Build the first double-sided pcb, although with problems to misadjusting. | ||