RepRap Setup: Unterschied zwischen den Versionen
Init |
Skeinforge |
||
| Zeile 26: | Zeile 26: | ||
https://reprap.svn.sourceforge.net/svnroot/reprap/trunk/users/metalab/skeinforge-profiles/Kali/ | https://reprap.svn.sourceforge.net/svnroot/reprap/trunk/users/metalab/skeinforge-profiles/Kali/ | ||
https://reprap.svn.sourceforge.net/svnroot/reprap/trunk/users/metalab/replicatorg/machines-Kali.xml | |||
== Setup and run == | |||
=== Skeinforge === | |||
Skeinforge liest ein STL file ein und erzeigt ein gcode file fuer die Zielmaschine. | |||
Setup: | |||
* Kopieren/Auschecken des skeinforge profiles, z.Bsp. nach ~/.skeinforge/profiles/Kali/ | |||
* Starten von skeinforge mit "python ./skeinforge.py" und auswaehlen des Profiles im "Profile" dialog | |||
Running (example): | |||
clifford@turing:~/Temp/python-beanshell-scripts$ ./runskeinforge.sh demo.stl | |||
File demo-07101807/demo.stl is being chain exported. | |||
The extrusion fill density ratio is 0.698 | |||
The commented file is saved as demo-07101807/demo_export_comment.gcode | |||
The lower left corner of the skeinview window is at -22.659, -22.652 | |||
The upper right corner of the skeinview window is at 22.659, 22.666 | |||
Statistics are being generated for the file demo-07101807/demo_export.gcode | |||
On the X axis, the extrusion starts at -23 mm and ends at 23 mm, for a width of 46 mm | |||
On the Y axis, the extrusion starts at -23 mm and ends at 23 mm, for a depth of 46 mm | |||
On the Z axis, the extrusion starts at 0 mm and ends at 44 mm, for a height of 43 mm | |||
The average feedrate is 27 mm/s, (1625 mm/min). | |||
The extruder speed is 255 | |||
The extruder was extruding 85% of the time. | |||
The extruder was toggled 2490 times. | |||
The extrusion width is 0.707 mm. | |||
The following procedures have been performed on the skein: | |||
... | |||
The layer thickness is 0.372 mm. | |||
The text has 69513 lines and a size of 2409.0 KB. | |||
The total build time is 2562 s. | |||
The total distance extruded is 58899 mm. | |||
The total distance traveled is 69414 mm. | |||
The volume extruded is 14 cc. | |||
The exported file is saved as demo-07101807/demo_export.gcode | |||
It took 430 seconds to export the file. | |||
/home/clifford/Temp/python-beanshell-scripts/demo-07101807/demo_export.gcode | |||
=== ReplicatorG Setup === | |||