PacmanCaster: Unterschied zwischen den Versionen

@@ Zeile 41: / Zeile 41: @@
 ==== CAM Preview ====
 [[File:Pacitar-rough.png|512px|Cam Preview]]
-=== Checklist ===
-# Mill the guitar on the cnc.
-# Cut the remainders away.
-# Drill all holes
-# Sand the workpiece completely. 40, 80, 120, 180, 240.
-# Work edges with the template router
-# Carefully sand the edges
-# Hang the guitar by a thread
-# Prime the workpiece 3 times
-# Wet-sand with 400
-# Paint the workpiece 3 times
-# Wet-sand with 400
-# Apply lacquer 2 times
-# Wet-sand with 600
-# Apply lacquer 2 times
-# Wet-sand with 600
-# Apply lacquer 3 times
-# Wet-sand with 600, 1200, 2000
-# Polish the workpiece
 == Lessions learned ==
@@ Zeile 99: / Zeile 79: @@
 # Built-in recording to sdcard?
 * Build an aluminum (or maybe steel?) guitar with a slight spring effect in neck axis. make that "spring" adjustable in hardness as well as resonance frequency.
+== Checklist ==
+# Mill the guitar on the cnc.
+# Cut the remainders away.
+# Drill all holes
+# Sand the workpiece completely. 40, 80, 120, 180, 240.
+# Work edges with the template router
+# Carefully sand the edges
+# Hang the guitar by a thread
+# Prime the workpiece 3 times
+# Wet-sand with 400
+# Paint the workpiece 3 times
+# Wet-sand with 400
+# Apply lacquer 2 times
+# Wet-sand with 600
+# Apply lacquer 2 times
+# Wet-sand with 600
+# Apply lacquer 3 times
+# Wet-sand with 600, 1200, 2000
+# Polish the workpiece