WhateverLab/Guide: Unterschied zwischen den Versionen

← Zum vorherigen Versionsunterschied Zum nächsten Versionsunterschied →

@@ Zeile 1: / Zeile 1: @@
 == WhateverLab & HeavyMachinery Guide ==
@@ Zeile 28: / Zeile 27: @@
 Classic examples of tools being re-purposed unsuccessfully (aka. breaking them) are: Using wire cutters to cut anything else then wires, using screw drivers as drill/spatula/crowbar and using the wrong drill for the wrong material (rendering them dull).
-Aside from there designated use tools need maintenance and proper handling – Even if you use the right tool for the right job in the right fashion you might end up breaking it. That is because some tools need special handling before and after using them. Examples include: untightening saw blades after use, carefully putting files back into the drawer and not stacking them on top of each other. Please, if you are not 100% sure you know exactly how a tool is handled and maintained '''ask'''!
+Aside from there designated use tools need maintenance and proper handling – Even if you use the right tool for the right job in the right fashion you might end up breaking it. That is because some tools need special handling before and after using them.
+Examples include:
+* untightening saw blades after use to prevent wear out
+* carefully putting files back into the drawer and not stacking them on top of each other.
+'''Please, if you are not 100% sure you know exactly how a tool is handled and maintained, ask'''!
 == Bad and very bad habits ==