Kinky Stardust (Acoustic Guitar Pickup): Unterschied zwischen den Versionen

@@ Zeile 38: / Zeile 38: @@
 ===== The Approach =====
-After some experiments i build a pickup to the above AES design (which despite the similarity works differently) with three major modifications:
+After some experiments i build a pickup to the above AES design and step by step came up with three major modifications (which actually make my pickup work very differently compared to an AES - but anyway it was my starting point):
-. There is no couplant and the wear plate doesn't directly touch the object. Instead i left an air cushion of about a 1.5 centimeters between them. Note that the connection between object and
+# There is no couplant and the wear plate doesn't directly touch the object. Instead i left an air cushion of about a 1.5 centimeters between them. Note that the chamber between object and case is airtight.
-case is airtight.
+# I also introduced a gap (about 3mm) between the backside of the piezo element and the dampening material and drilled a small hole (~ 1mm) in the dampening material, so that the backside
-. I also introduced a gap (about 3mm) between the backside of the piezo element and the dampening material and drilled a small hole (~ 1mm) in the dampening material, so that the backside
 pocket is not airtight.
-. I used hard rubber as case material.
+# I used hard rubber as case material.
 ===== Theories™ =====