CNC-Fräse: Unterschied zwischen den Versionen
Reox (Diskussion | Beiträge) |
Reox (Diskussion | Beiträge) |
||
| Zeile 249: | Zeile 249: | ||
! Cutter | ! Cutter | ||
! Cooling | ! Cooling | ||
! Cutting Speed v_c | ! Cutting Speed <math>v_c</math> | ||
! Feed Rate per Tooth f_z | ! Feed Rate per Tooth <math>f_z</math> | ||
! Comment | ! Comment | ||
|- | |- | ||
| Wood || VHM || No || >400 || >0.06 || Tested with n=24000, z=2, d=6, v_f=3000 | | Wood || VHM || No || >400 || >0.06 || Tested with <math>n=24000, z=2, d=6, v_f=3000</math> | ||
|- | |- | ||
|} | |} | ||
| Zeile 265: | Zeile 265: | ||
! Unit | ! Unit | ||
|- | |- | ||
| f_z || Feed per Teeth || Vorschub pro Schneide || mm | | <math>f_z</math> || Feed per Teeth || Vorschub pro Schneide || <math>\text{mm}</math> | ||
|- | |- | ||
| v_c || Cutting Speed || Schnittgeschwindigkeit || m/ | | <math>v_c</math> || Cutting Speed || Schnittgeschwindigkeit || <math>\frac{\text{m}}{\text{min}}</math> | ||
|- | |- | ||
| v_f || Feed Rate Forward || Vorschub || mm/ | | <math>v_f</math> || Feed Rate Forward || Vorschub || <math>\frac{\text{mm}}{\text{min}}</math> | ||
|- | |- | ||
| z || Number of Teeth || Anzahl der Schneiden || | | <math>z</math> || Number of Teeth || Anzahl der Schneiden || | ||
|- | |- | ||
| n || Revolutions || Umdrehungsgeschwindigkeit ||1/ | | <math>n</math> || Revolutions || Umdrehungsgeschwindigkeit || <math>\frac{\text{1}}{\text{min}}</math> | ||
|- | |- | ||
| a_p || Infeed || Tiefenzustellung || mm | | <math>a_p</math> || Infeed || Tiefenzustellung || <math>\text{mm}</math> | ||
|- | |- | ||
| a_e || Sidewards Feed || Seitenzustellung || mm | | <math>a_e</math> || Sidewards Feed || Seitenzustellung || <math>\text{mm}</math> | ||
|- | |- | ||
| d || Cutter diameter || Fräserdurchmesser || mm | | <math>d</math> || Cutter diameter || Fräserdurchmesser || <math>\text{mm}</math> | ||
|- | |- | ||
|} | |} | ||