CNC-Fräse: Unterschied zwischen den Versionen
Reox (Diskussion | Beiträge) |
Reox (Diskussion | Beiträge) |
||
| Zeile 19: | Zeile 19: | ||
* '''Spindle speed''': 6000 - 24000 min^-1 | * '''Spindle speed''': 6000 - 24000 min^-1 | ||
* '''Tool Size''': 1mm up to 8mm shank, also 1/8" shanks | * '''Tool Size''': 1mm up to 8mm shank, also 1/8" shanks | ||
* '''Maximum step speed''': 2000 mm*min^-1 | * '''Maximum step speed''': 2000 mm*min^-1 (4000mm*min^-1 for G0) | ||
* '''Maximum Workpiece Dimension''': about 725mm * 395mm (X*Y). The height depends on your workpiece, millhead and where do you fix it! | * '''Maximum Workpiece Dimension''': about 725mm * 395mm (X*Y). The height depends on your workpiece, millhead and where do you fix it! | ||
* '''Cooling''': Air (or liquids by hand) | * '''Cooling''': Air (or liquids by hand) | ||
* '''Clamping''': Various - depends on your job | * '''Clamping''': Various - depends on your job | ||
* '''Software''': Runs via LinuxCNC (an Open Source CNC Software) | * '''Software''': Runs via [http://www.linuxcnc.org/ LinuxCNC] (an Open Source CNC Software) | ||
For projects results of this machine, please visit http://geilomat.soup.io/ | For projects results of this machine, please visit http://geilomat.soup.io/ | ||