CNC-Fräse: Unterschied zwischen den Versionen
Reox (Diskussion | Beiträge) |
Reox (Diskussion | Beiträge) |
||
| Zeile 168: | Zeile 168: | ||
| Wood ||0.8||4||100%||12000-14000||~250|| guessed proposal | | Wood ||0.8||4||100%||12000-14000||~250|| guessed proposal | ||
|- | |- | ||
| Wood ||3|| | | Wood ||3||0.8||50%||12000||600|| looked good, material was plywood 8mm | ||
|- | |- | ||
| Aluminium || 6 || 0.25 || 6mm || 10000 || 1100 || Vierschneider, schleppender Schnitt - no external cooling | | Aluminium || 6 || 0.25 || 6mm || 10000 || 1100 || Vierschneider, schleppender Schnitt - no external cooling | ||