CNC-Fräse: Unterschied zwischen den Versionen

@@ Zeile 142: / Zeile 142: @@
 ==Reference==
 a usefull preamble for this mill:
-  M3 S6000
+  M3     ; starts spindl clockwise (looking from above down)
+ S6000  ; 6000 min-1
+ G4 P60 ; wait for 60 seconds
+ S12000 ; 12000 min-1 until the whished speed is reached
   G4 P60
-  M3 S12000 ; until the whished speed is reached
+  F950   ; xyz feedrate 950 mm/min
- G4 P60
- F950
   G90
   G21
@@ Zeile 156: / Zeile 157: @@
 Example Gcode Header for Geilomat:
-  G21 ;mm
+  G21     ; mm
-  G90 ; absolute coordinates
+  G90     ; absolute coordinates
   G0 Z10
   G0 X0 Y0
-  F500 ;500mm/minutes movement speed
+  F500    ; 500mm/minutes movement speed
-  M7 ; staubsauger an
+  M7      ; staubsauger an
-  S6000 M3 ; fraeser einschalten
+  M3      ; fraeser einschalten
-  G4 P60 ; 60 sekunden warten bis motor warm ist
+ S6000   ; Drehzal auf 6000 min-1 einstellen
+  G4 P60  ; 60 sekunden warten bis motor warm ist
 Typical gcode Tail:
   ; the tail
@@ Zeile 170: / Zeile 173: @@
 === Parameters for typical jobs ===
- WARNING: All these parameters vary with mill head size, material and process used (compare "Schruppen" vs. "Schlichten")
- please just dont copy these values here, there are plenty of tools online that can calculate correct values.
 {| class="wikitable" border="1" cellpadding="5" cellspacing="0" align="center"