Wiz: Unterschied zwischen den Versionen
Oneup (Diskussion | Beiträge) Keine Bearbeitungszusammenfassung |
Oneup (Diskussion | Beiträge) Keine Bearbeitungszusammenfassung |
||
Zeile 19: | Zeile 19: | ||
* extract & go to folder | * extract & go to folder | ||
* compile wizTest.c | * compile wizTest.c | ||
== Experiment with | |||
<pre> | |||
char c = getchar(); | |||
putchar(c); | |||
</pre> | |||
== Fullscreen access == | |||
screen frame buffer, read buttons via: [http://www.gp2xwiz.co.uk/wiki/Using_libcastor libcastor] | |||
[http://www.gp2xwiz.co.uk/wiki/Read_Microphone read microphone] | |||
== Join the metalab development forces == | == Join the metalab development forces == |
Version vom 15. Juli 2009, 01:41 Uhr
See Official Wiz Wiki
& Files on Wiz File Archive
intrigued:
Setup the toolchain
http://www.gp2xwiz.co.uk/wiki/Setting_up_the_tool_chain_on_Linux
* download * extract & go to folder * compile wizTest.c
== Experiment with
char c = getchar(); putchar(c);
Fullscreen access
screen frame buffer, read buttons via: libcastor read microphone
Join the metalab development forces
- Wiz Ideas
- Shell
- Hardware Addon: Multiplayer connector (Nullmodem Kabel Style)
- Easy Program Transfer
- Wiz Cross Compilation Efforts
- ScummVM?
- Quake III anyone?
Tipps
Terminal Application for root shell on the wiz termula2x port to the Wiz
Troubleshooting
The following issue seems to be solved as of Wiz Firmware v1.1 but anyway - here is how to solve it if it should ever appear again!
When the Wiz runs out of battery while gaming it can happen that the Flash drive (internal NAND or SD Card) is left in a bad state. Symptoms are - no write access to the drive, no savegames and the like.
While it is always easy to take out the SD Card and repair or format it on a computer this is not possible with the internal NAND storage. Here is how to do it:
- Connect the Wiz to a computer using the supplied USB Cable
- Turn on the Wiz and tell it to mount the NAND storage when the dialog pops up asking (A-Button)
Linux: Figure out where the Wiz mounted. I will use /dev/sdf for the sake of this example but it will be different on different machines! Then unmount the Wiz from the Linux Box, get root and run fsck -a /dev/sdf until no more errors are reported.
MacOS X: Open Disk Utility (Festplatten Dienstprogramm) and simply use it's repair function on the mounted Wiz drive. Alternatively you can use the command line just like under Linux but with a little different syntax (hint: fsck_msdos -y /dev/disk1)
Windows: Find the Wiz's drive letter, right-click on it and find the drive repair function.
- Reboot the Wiz, it should now work fine again.
It might also be possible to simply reformat the Wiz's drive because the actual Linux System on the Wiz does not reside in the visible NAND drive but this hast not been tested - Just try it and tell if you ruined your Wiz, or not :-)