FunkFeuer-Node/Komponenten: Unterschied zwischen den Versionen

Version vom 3. Oktober 2007, 11:18 Uhr

* WRT54G ver. 2
- S/N: CDF50D507547
- MAC: 000F665B69F3

* WRT54G v 3.1 (DEFEKT)
- S/N: CDF90E709319
- MAC: 0014BF16DB6A

Manufacturer	MikroTik
Product Page	http://www.routerboard.com/rb100.html
Distributor	http://www.evonet.at/mikrotik/catalog/index.php?cPath=24
CPU	MIPS32 4Kc, 175MHz embedded
Memory	32MB SDRAM
Boot loader	RouterBOOT, 1Mbit Flash chip
Data storage	64MB onboard NAND memory chip
Ethernet ports	Five 10/100 Mbit ethernet ports supporting Auto MDI/X
MiniPCI slot	Three miniPCI Type IIIA/IIIB slots
Speaker	present
Serial ports	One DB9 RS232C asynchronous serial port
LEDs	Power, 3 LED pairs for MiniPCI slots, 1 user LED
Power options	11..60V DC - power jack or IEEE802.3af Power over Ethernet (12V / 48V DC, including power over datalines)
Power Out	Two 3V DC power output headers (only one populated by default), maximal output current - 500mA total
Power Consumption	3-4W without extension cards. Maximum 13W
Dimensions	160mm x 160mm (6.3in x 6.3in)
Weight	183g (6.5oz)
Temperature	Operational: -20°C to +70°C (-4°F to 158°F)
Humidity	Operational: 70% relative humidity (non-condensing)
Supported OS	RouterOS, GNU/Linux
Documentation	Users Manual Startup Guide
Unit Dimensions	PDF DXF
Case Dimensions	PDF DXF
Firmware Upgrade	2.8 Changes

Manufacturer	MikroTik
Product Page	http://www.mikrotik.com/pdf/R52.pdf
Distributor	http://www.evonet.at/mikrotik/catalog/product_info.php?cPath=23&products_id=34

EUR 19,90 (kleinere Memory Card gabs beim nahen Niedermeyer nicht)

Snapshot der Produktseite zum REGLERGEHÄUSE PC 21/18-FC3 bei Conrad.at (Best.Nr. 524063)
Datenblatt

@@ Zeile 137: / Zeile 137: @@
 * [http://www2.produktinfo.conrad.com/datenblaetter/500000-524999/524063-da-01-en-REGLERGEHAEUSE_PC_21_18-C_FC_II.pdf Datenblatt]
+{|width="100%"
-[[Bild:Ant 16bg.jpg|right|thumb|220px|[http://nr07624.vhost-enzo.sil.at/product_info.php/products_id/272 Ant Panel 16 bg Set]]]
+|valign="top"|
-=== Antenne Ant 16 bg Set ===
+|
+=== Panel Antenne Ant 16 bg Set ===
 * 2 x WLAN-Panel-Antenne 16 dBi für 802.11 b und g, N-Buchse
@@ Zeile 146: / Zeile 147: @@
 * [[:Bild:Ant Panel 16bg Set.pdf|lokale Kopie]] <small>[PDF]</small>
+=== Omnidirektionale Antenne ===
+* N-Buchse
 === Pig-Tails ===
@@ Zeile 151: / Zeile 155: @@
 * 3 x 1,5 m HDF 200 Low Loss Antennenkabel 0,54 dB / m @ 2,4 GHz
 * mit je 2 Stk. N ST HDF 200 C  N-Stecker Crimp-Version
+|
+[[Bild:Omni.jpg|right]]
+|[[Bild:Ant 16bg.jpg|right|thumb|220px|[http://nr07624.vhost-enzo.sil.at/product_info.php/products_id/272 Ant Panel 16 bg Set]]]
+|}
 == Software ==