Umbrella: Unterschied zwischen den Versionen

(13 dazwischenliegende Versionen von 5 Benutzern werden nicht angezeigt)

Zeile 1:

[[Datei:~~Buntschirm~~.jpg|~~miniatur~~]]

__TOC__

[[~~Datei:u_blue~~.~~jpg~~|~~miniatur~~]]

=Version 2.0=

[[Datei:~~u_pink~~.~~jpg~~|~~miniatur~~]]

[[Datei:Umbrella_v2_bunt.jpg|300px|thumb|right|The new lamps lit up in all the colours]]

At several [[Jour_Fixe|Jour fixes]] ([[2022-02-22_Jour_Fixe#neues_Licht_im_Hauptraum_.28luto.2C_cube.2C_anlumo.29|2022-02-22_Jour_Fixe]], [[2022-04-26_Jour_Fixe#Upgrade_f.C3.BCr.27s_Upgrade_vom_Hauptraumlicht_.28ripper.2C_anlumo.2C_cube.2C_nicht_luto.29|2022-04-26_Jour_Fixe]] and [[2022-05-11_Jour_Fixe#Erhellung_Hauptraum_.28ripper.2C_fussel.29|2022-05-11_Jour_Fixe]]) the decision was made that the Umbrellas need an upgrade. The LED strips were replaced by four IKEA Tradfri LED bulbs which are mounted on a custom lasercut aluminium plate.

~~Umbrella is~~ the ~~ceiling lighting~~ of ~~the main room~~. ~~It consist out~~ of 12 umbrellas ~~capable of emitting light~~ in ~~either 16581375 RGB shades or 65025 white shades~~.

[[Datei:Umbrella_v2_4er.png|300px|thumb|right|3D redering of the Aluminium plate with the LED bulbs]]

== How to use ==

[[User:anlumo|anlumo]] knows all the things about them!

They are all mapped into our [[SmartLab]] and controllable through Zigbee via Home Assistant.

Name convention:

* <code>light.Hauptraumschirm_<row>_<column>_<index></code> for individual lamps

* <code>light.Hauptraumschirm_<row>_<column></code> for individual umbrellas

* <code>light.Hauptraumschirm_<row></code> for rows of umbrellas

* <code>light.Hauptraumschirme</code> for all of them together

All numbers are 1-based. The indexes of the lamps inside umbrellas are random, but otherwise the numbering starts at 1,1 in the corner near the library and the kitchen.

== Hardware ==

All CAD files can be found on Github: [https://github.com/Metalab/Umbrella_v2 Umbrella v2]

[[User:ripper|ripper]] knows all the things about the hardware and will add this!

~~The umbrellas are controllable with [https~~:~~//en.wikipedia.org/wiki/Art-Net art-net].~~

ToDo: add info on hardware thats not in the Github repo

~~==How to simply turn on/off the light==~~

~~Use the light switch next to the kitchen. You can dim the light with the rotary knob~~ on the ~~side.~~

~~[[Datei:Umbrella_lightswitch_1.jpg|200px]]~~

~~[[Datei:Umbrella_lightswitch_2.jpg|200px]]~~

~~If it does not work just power cycle it. Wait a couple of seconds.~~

[~~[Datei~~:~~Umbrella_reset~~.~~jpg|200px|Metalab school of software resilience(tm) :)]~~]

== Maintenance ==

The bulbs are standard, [https://www.ikea.com/at/de/p/tradfri-led-leuchtmittel-e27-806-lm-kabellos-dimmbar-farb-und-weissspektrum-rund-opalweiss-70439158/ Ikea TRÅDFRI RGB LED bulbs]. For replacing one, the umbrella needs to be removed by pushing them upwards and moving them towards the windows.

~~===New Version===~~

ToDo: how to replace components/fixtures

~~Out of good reasons, we upgraded the light switch~~ to ~~a much more powerful version.~~

~~This light switch has 4 buttons:~~

== Credits ==

* ~~the "Mode" button on the side~~, ~~surrounded by multiple light-ray-resembling lines. This button switches between different light modes for~~ the ~~umbrella-lights.~~

* [[User:anlumo|anlumo]]: setting up everything in metalabs home assistant, wiring up the fixtures

* the ~~"Reset" button on the other side~~, ~~surrounded by an arrow revolving around it. If the switch doesn't work anymore~~, ~~it can be restarted using this button. Wait a few seconds after pressing it shortly.~~

* [[User:cube|cube]]: installing the fixtures, wiring 230V, 3D printing inserts

* ~~the "+" or "Brightness Up" button on top. This button increases the brightness~~ of the ~~umbrella-lights in all modes, except in party mode. For that mode~~, ~~it increases~~ the ~~blinking speed.~~

* [[User:luto|luto]]: teardown of the old lamps, assembling the lamps

* ~~the "-" or "Brightness Down" button on top. This button decreases the brightness of the umbrella-lights in all modes~~, ~~except in party mode. For that mode~~, ~~it decreases the blinking speed.~~

* [[User:ripper|ripper]]: design, assembling and installing lamps, 3D printing inserts

* [[User:you|you?]]: Did you help? add yourself!

~~Each button is to be pressed shortly~~. ~~For example~~: ~~Holding one~~ of the ~~brightness-buttons does not result~~ in ~~a repeated button press. Short is key~~.

=Version 1.0=

Outdated information, just here for documenting the history

This version has been replaced.

[[Datei:Buntschirm.jpg|right|miniatur]]

[[Datei:u_blue.jpg|right|miniatur]]

[[Datei:u_pink.jpg|right|miniatur]]

Umbrella is the ceiling lighting of the main room. It consist out of 12 umbrellas capable of emitting light in either 16581375 RGB shades or 65025 white shades.

~~This light switch has several modes~~:

The umbrellas are controllable with [https://en.wikipedia.org/wiki/Art-Net art-net].

* █ All Red (#F00)

* █</~~span> All Lime (#0F0)~~

* █</~~span> All Blue (#00F)~~

* █</~~span> All Yellow (#FF0)~~

* █</~~span> All Fuchsia (=Pink) (#F0F)~~

* █ All Aqua (=Cyan) (#0FF)

* █ All RGB White (RGB to 100%) (#FFF)

* All Warm White

* All Cold White

* All Warm and Cold White

* Party mode: All lights blink in different colors individually

~~==Access data==~~

~~Wlan SSID: metalights~~

==How to simply turn on/off the light==

~~Protocol:~~ [~~https:/~~/en.~~wikipedia.org/wiki/Art-Net art-net]~~

Use the '''[[Interruttore/en|Interruttore]]''' light switch.

~~Host: 10.20.255.255~~

== Access data ==

startUniverse: 3

* WLAN SSID: metalights

* Protocol: [https://en.wikipedia.org/wiki/Art-Net art-net]

* Host: 10.20.255.255

* startUniverse: 3

* There are 60 channel, 5 channels (RGBWW) per umbrella.

~~There are 60 channel, 5 channels (RGBWW) per umbrella.~~

==Why==

== Why ==

~~The Metalab needed some new lights.~~

~~ART-net is awesome.~~

The Metalab needed some new lights. ART-net is awesome.

== How ==

Raspberry Pi 3 + Touchscreen

* Raspberry Pi 3 + Touchscreen

* Distro based on the QLC+ image (raspbian jessie)

Distro based on the QLC+ image (raspbian jessie)

* QLC+ XServer less build that renders directly in GL buffers for performance

* H801 based clients (ESP8266)

QLC+ XServer less build that renders directly in GL buffers for performance

* Arduino based firmware that implements ART-net

H801 based clients (ESP8266)

Arduino based firmware that implements ART-net

== Temporary setup with QLC+ ==

Connect to "metalights" WLAN

* Connect to "metalights" WLAN

* Set OUTPUT to 10.20.255.255

Set OUTPUT to 10.20.255.255

* Set ARTnet universe to 3

* There are 5 channels / Umbrella

Set ARTnet universe to 3

* R,G,B,WW,CW

* If CW or WW are anything else but "0" then R,G and B are disabled by firmware.

There are 5 channels / Umbrella

* If R,G or B are anything but "0" then CW and WW are disabled by firmware.

* This is to save our power supplies from sudden heat death.

R,G,B,WW,CW

* (105 watt / Umbrella max)

If CW or WW are anything else but "0" then R,G and B are disabled by firmware.

If R,G or B are anything but "0" then CW and WW are disabled by firmware.

This is to save our power supplies from sudden heat death.

(105 watt / Umbrella max)

== Hardware ==

H801 LED controller features:

* 8 Mbit Storage (1 Mb)

* 5 channels each 45 watt max (~ 3.5 Ampere @ 12 V / channel)

Zeile 103:

Zeile 97:

=== How to flash ===

* Install [https://www.arduino.cc/en/Main/Software Arduino IDE]

* Install [http://esp8266.github.io/Arduino/versions/2.0.0/doc/installing.html ESP 8266 extensions]

Zeile 130:

Zeile 125:

* [https://arduinojson.org/ ArduinoJson] (Version 5.13.3)

==Who==

== Who ==

Originally invented and built by [[Benutzer:overflo|overflo]], the umbrellas were built by a lot of people in some night shifts at Metalab

LOTS ~~OF SUPPORT BY~~

LOTS of support by

uniq, anlumo, ripper, bogdan <your name here>

* uniq, anlumo, ripper, bogdan <your name here>

== QLC+ ==

* Neue Fixture: [[Datei:Hauptraum_setup.qxw.txt]] (das muss nach ~/.qlcplus/fixtures/hauptraum-setup.qxf)

* Fixture: [[Datei:Metalab-Umbrella.txt]] (das muss nach ~/.qlcplus/fixtures/Metalab-Umbrella.qxf)

* Demo Desk: [[Datei:Test.txt]]

~~Neue Fixture: [[Datei:Hauptraum_setup.qxw.txt]] (das muss nach ~/.qlcplus/fixtures/hauptraum-setup.qxf)~~

~~Fixture: [[Datei:Metalab-Umbrella.txt]] (das muss nach ~/.qlcplus/fixtures/Metalab-Umbrella.qxf)~~

~~Demo Desk: [[Datei:Test.txt]]~~

== Links ==

~~==Links==~~

* [http://www.qlcplus.org/ QLC+]

* [http://tinkerman.cat/closer-look-h801-led-wifi-controller H801]

[http://www.qlcplus.org/ QLC+]

* [https://github.com/overflo23/H801_ARTnet Github]

* [http://www.artisticlicence.com/WebSiteMaster/User%20Guides/art-net.pdf ART-net Reference]

[http://tinkerman.cat/closer-look-h801-led-wifi-controller H801]

[https://github.com/overflo23/H801_ARTnet Github]

[http://www.artisticlicence.com/WebSiteMaster/User%20Guides/art-net.pdf ART-net Reference]

[[Artnet]]

* [https://github.com/reox/pybrella A Python implementation to control the umbrellas]

[https://github.com/reox/pybrella A Python implementation to control the umbrellas]