Umbrella: Unterschied zwischen den Versionen
Reox (Diskussion | Beiträge) |
Anlumo (Diskussion | Beiträge) |
||
| (17 dazwischenliegende Versionen von 5 Benutzern werden nicht angezeigt) | |||
| Zeile 1: | Zeile 1: | ||
[[Datei:Buntschirm.jpg|miniatur]] | __TOC__ | ||
[[Datei:u_blue.jpg|miniatur]] | =Version 2.0= | ||
[[Datei:u_pink.jpg|miniatur]] | [[Datei:Umbrella_v2_bunt.jpg|300px|thumb|right|The new lamps lit up in all the colours]] | ||
At several [[Jour_Fixe|Jour fixes]] ([[2022-02-22_Jour_Fixe#neues_Licht_im_Hauptraum_.28luto.2C_cube.2C_anlumo.29|2022-02-22_Jour_Fixe]], [[2022-04-26_Jour_Fixe#Upgrade_f.C3.BCr.27s_Upgrade_vom_Hauptraumlicht_.28ripper.2C_anlumo.2C_cube.2C_nicht_luto.29|2022-04-26_Jour_Fixe]] and [[2022-05-11_Jour_Fixe#Erhellung_Hauptraum_.28ripper.2C_fussel.29|2022-05-11_Jour_Fixe]]) the decision was made that the Umbrellas need an upgrade. The LED strips were replaced by four IKEA Tradfri LED bulbs which are mounted on a custom lasercut aluminium plate. | |||
[[Datei:Umbrella_v2_4er.png|300px|thumb|right|3D redering of the Aluminium plate with the LED bulbs]] | |||
== How to use == | |||
[[User:anlumo|anlumo]] knows all the things about them! | |||
They are all mapped into our [[SmartLab]] and controllable through Zigbee via Home Assistant. | |||
Name convention: | |||
* <code>light.Hauptraumschirm_<row>_<column>_<index></code> for individual lamps | |||
* <code>light.Hauptraumschirm_<row>_<column></code> for individual umbrellas | |||
* <code>light.Hauptraumschirm_<row></code> for rows of umbrellas | |||
* <code>light.Hauptraumschirme</code> for all of them together | |||
All numbers are 1-based. The indexes of the lamps inside umbrellas are random, but otherwise the numbering starts at 1,1 in the corner near the library and the kitchen. | |||
== Hardware == | |||
All CAD files can be found on Github: [https://github.com/Metalab/Umbrella_v2 Umbrella v2]<br> | |||
[[User:ripper|ripper]] knows all the things about the hardware and will add this! | |||
ToDo: add info on hardware thats not in the Github repo | |||
== Maintenance == | |||
The bulbs are standard, [https://www.ikea.com/at/de/p/tradfri-led-leuchtmittel-e27-806-lm-kabellos-dimmbar-farb-und-weissspektrum-rund-opalweiss-70439158/ Ikea TRÅDFRI RGB LED bulbs]. For replacing one, the umbrella needs to be removed by pushing them upwards and moving them towards the windows. | |||
ToDo: how to replace components/fixtures | |||
== Credits == | |||
* [[User:anlumo|anlumo]]: setting up everything in metalabs home assistant, wiring up the fixtures | |||
* [[User:cube|cube]]: installing the fixtures, wiring 230V, 3D printing inserts | |||
* [[User:luto|luto]]: teardown of the old lamps, assembling the lamps | |||
* [[User:ripper|ripper]]: design, assembling and installing lamps, 3D printing inserts | |||
* [[User:you|you?]]: Did you help? add yourself! | |||
=Version 1.0= | |||
<span style="font-size: 16pt; color: red;">Outdated information, just here for documenting the history</span> | |||
This version has been replaced.<br> | |||
[[Datei:Buntschirm.jpg|right|miniatur]] | |||
[[Datei:u_blue.jpg|right|miniatur]] | |||
[[Datei:u_pink.jpg|right|miniatur]] | |||
Umbrella is the ceiling lighting of the main room. It consist out of 12 umbrellas capable of emitting light in either 16581375 RGB shades or 65025 white shades. | Umbrella is the ceiling lighting of the main room. It consist out of 12 umbrellas capable of emitting light in either 16581375 RGB shades or 65025 white shades. | ||
The umbrellas are controllable with [https://en.wikipedia.org/wiki/Art-Net art-net]. | The umbrellas are controllable with [https://en.wikipedia.org/wiki/Art-Net art-net]. | ||
== | ==How to simply turn on/off the light== | ||
Use the '''[[Interruttore/en|Interruttore]]''' light switch. | |||
== Access data == | |||
Host: 10.20.255.255 | * WLAN SSID: metalights | ||
* Protocol: [https://en.wikipedia.org/wiki/Art-Net art-net] | |||
* Host: 10.20.255.255 | |||
* startUniverse: 3 | |||
* There are 60 channel, 5 channels (RGBWW) per umbrella. | |||
== Why == | |||
The Metalab needed some new lights. ART-net is awesome. | |||
== How == | == How == | ||
Raspberry Pi 3 + Touchscreen | * Raspberry Pi 3 + Touchscreen | ||
* Distro based on the QLC+ image (raspbian jessie) | |||
Distro based on the QLC+ image (raspbian jessie) | * QLC+ XServer less build that renders directly in GL buffers for performance | ||
* H801 based clients (ESP8266) | |||
QLC+ XServer less build that renders directly in GL buffers for performance | * Arduino based firmware that implements ART-net | ||
H801 based clients (ESP8266) | |||
Arduino based firmware that implements ART-net | |||
== Temporary setup with QLC+ == | == Temporary setup with QLC+ == | ||
Connect to "metalights" WLAN | * Connect to "metalights" WLAN | ||
* Set OUTPUT to 10.20.255.255 | |||
Set OUTPUT to 10.20.255.255 | * Set ARTnet universe to 3 | ||
* There are 5 channels / Umbrella | |||
Set ARTnet universe to 3 | * R,G,B,WW,CW | ||
* If CW or WW are anything else but "0" then R,G and B are disabled by firmware. | |||
There are 5 channels / Umbrella | * If R,G or B are anything but "0" then CW and WW are disabled by firmware. | ||
* This is to save our power supplies from sudden heat death. | |||
R,G,B,WW,CW | * (105 watt / Umbrella max) | ||
If CW or WW are anything else but "0" then R,G and B are disabled by firmware. | |||
If R,G or B are anything but "0" then CW and WW are disabled by firmware. | |||
This is to save our power supplies from sudden heat death. | |||
(105 watt / Umbrella max) | |||
== Hardware == | == Hardware == | ||
H801 LED controller features: | H801 LED controller features: | ||
* 8 Mbit Storage (1 Mb) | * 8 Mbit Storage (1 Mb) | ||
* 5 channels each 45 watt max (~ 3.5 Ampere @ 12 V / channel) | * 5 channels each 45 watt max (~ 3.5 Ampere @ 12 V / channel) | ||
| Zeile 79: | Zeile 97: | ||
=== How to flash === | === How to flash === | ||
* Install [https://www.arduino.cc/en/Main/Software Arduino IDE] | * Install [https://www.arduino.cc/en/Main/Software Arduino IDE] | ||
* Install [http://esp8266.github.io/Arduino/versions/2.0.0/doc/installing.html ESP 8266 extensions] | * Install [http://esp8266.github.io/Arduino/versions/2.0.0/doc/installing.html ESP 8266 extensions] | ||
| Zeile 106: | Zeile 125: | ||
* [https://arduinojson.org/ ArduinoJson] (Version 5.13.3) | * [https://arduinojson.org/ ArduinoJson] (Version 5.13.3) | ||
==Who== | |||
== Who == | |||
Originally invented and built by [[Benutzer:overflo|overflo]], the umbrellas were built by a lot of people in some night shifts at Metalab | Originally invented and built by [[Benutzer:overflo|overflo]], the umbrellas were built by a lot of people in some night shifts at Metalab | ||
LOTS | LOTS of support by | ||
uniq, anlumo, ripper, bogdan <your name here> | * uniq, anlumo, ripper, bogdan <your name here> | ||
== QLC+ == | == QLC+ == | ||
* Neue Fixture: [[Datei:Hauptraum_setup.qxw.txt]] (das muss nach ~/.qlcplus/fixtures/hauptraum-setup.qxf) | |||
* Fixture: [[Datei:Metalab-Umbrella.txt]] (das muss nach ~/.qlcplus/fixtures/Metalab-Umbrella.qxf) | |||
* Demo Desk: [[Datei:Test.txt]] | |||
== Links == | |||
* [http://www.qlcplus.org/ QLC+] | |||
* [http://tinkerman.cat/closer-look-h801-led-wifi-controller H801] | |||
[http://www.qlcplus.org/ QLC+] | * [https://github.com/overflo23/H801_ARTnet Github] | ||
* [http://www.artisticlicence.com/WebSiteMaster/User%20Guides/art-net.pdf ART-net Reference] | |||
[ | |||
[https://github.com/overflo23/H801_ARTnet Github] | |||
[http://www.artisticlicence.com/WebSiteMaster/User%20Guides/art-net.pdf ART-net Reference] | |||
[[Artnet]] | [[Artnet]] | ||
* [https://github.com/reox/pybrella A Python implementation to control the umbrellas] | |||
[https://github.com/reox/pybrella A Python implementation to control the umbrellas] | |||