Witbox: Unterschied zwischen den Versionen

(12 dazwischenliegende Versionen von 9 Benutzern werden nicht angezeigt)

Zeile 4:

|image=Witbox.png

|owner=Metalab

|status=~~Aktiv~~

|status=Inaktiv

|requirestraining=Ja

|requiresauth=~~[[Scanner_Raum|~~Ja]]

|requiresauth=Ja

|cost=0.10 euro / gram

|teachers=[[User:Hetti|Hetti]]

}}

{| width="100%"

__TOC__

'''It is OK to use the printer as it is.'''

Zeile 20:

Zeile 18:

This is a consumer grade semi professional machine, if you want to tinker with a 3d-printer check out the mendel90 reprap.

'''If you notice any problems with the machine''' (maintenance required, damage) '''you are required to report your observations'''. Please use either subscribers-only mailing lists intern@ or [https://lists.metalab.at/mailman/listinfo/3d-printing 3d-printing@], the [https://metalab.at/issues/ issue tracker] or mail to http://metalab.at/wiki/images/2/2b/Core.png.

===Overview===

Zeile 44:

Zeile 43:

* Once the filament is eject apply some more pullign force

* when the filament comes loose pull sharply and remove the filament from the tube completely (also any long debris that might hang off the filament needs to get out)

'''Save your .gcode to the SD card'''

Zeile 51:

Zeile 48:

* Import .stl

* Save to SD

* You can use folders with your nickname to group your files on an SD card. The Witbox' display will only show the first 19 characters of a filename. So make sure you can distinguish multiple files within that limit so you always print the correct file.

* Done.

Zeile 58:

Zeile 56:

* Push dialing wheel- > job starts

'''Pay used filament'''

* Calculate used material with your slicer or http://gcode.ws/

* Material costs are 0,10€/gramm

* Deposit appropriate amount in the 3D printing cash box.

===Wisdom Tables ===

Zeile 66:

{| class="wikitable"

|-

| PLA Neon Green || 0.1mm ||80mm/sec || 210C || [[Benutzer:Overflo|overflo]] || Good.

|-

| PLA Neon Green || 0.2mm ||60mm/sec || 220C || [[Benutzer:0x3d|0x3d]] || acceptable, 1st layer overhang curls, maybe too hot and slow

|-

| PLA WHITE (no name big spool) || 0.1mm ||80mm/sec || 210C || [[Benutzer:Overflo|overflo]] || Looks better at higher temperature

|-

| PLA Black bq || 0.1mm ||80mm/sec || 210C || [[Benutzer:Overflo|overflo]] || Good.

|-

| PLA Black bq || 0.05mm ||80mm/sec || 210C || [[Benutzer:Overflo|overflo]] || Very fine resolution!, Looks good! Used for [https://github.com/Xyl2k/TSA-Travel-Sentry-master-keys TSA keyset]

|-

| PLA transparent bq|| 0.1mm ||80mm/sec || 210C || [[Benutzer:Overflo|overflo]] || Good.

|-

| PLA purple noname (3dee.at)|| 0.1mm ||80mm/sec || 210C || [[Benutzer:Overflo|overflo]] || Good.

|-

| PLA blue noname (3dee.at)|| 0.2mm ||80mm/sec || 210C || [[Benutzer:Don|don]] || Large rectangular bottom layer was not sticking to the plate with Cura's default Witbox advanced settings. Default first layer thickness = 0.3mm and default first layer speed = 20mm/sec. I changed these to 0.2mm and 80mm/sec respectively and then it worked perfectly.

|-

|}

Zeile 89:

Zeile 95:

|-

|}

=== Software ===

Zeile 97:

Zeile 100:

[http://www.bq.com/gb/support/witbox Slic3r config files & manual]

Slic3r zip contains 3 different config files:

Zeile 102:

Zeile 106:

* Witbox_res_baja.ini -> 0.3 mm layer height

* Witbox_res_media.ini -> 0.2 mm layer height

Metalab config bundle for slic3r: [[Datei:Slic3r_config_bundle_metalab_v1.zip]]

=== [[Diskussion:Witbox|Supporters]] ===

Zeile 109:

Zeile 116:

=== Diverse Links ===

* [http://gcode.ws/ Gcode.ws] Analyse gcode for prize and duration (usefull if you use slic3r)

* [https://github.com/bq/witbox Design] of the 3D-Printer is under CreativeCommons licence.

* [http://www.heise.de/make/artikel/FDM-3D-Drucker-im-Vergleich-2545710.html heise.de comparsion of different printers (German)] (pro for our use: we can buy replacement parts easily in Vienna)