Dome: Unterschied zwischen den Versionen

← Zum vorherigen Versionsunterschied

VisuellWikitext

@@ Zeile 1: / Zeile 1: @@
-== MIDDLE - LEFT - RIGHT ==
+For the new Aluminium Dome 2.0 go [[Dome 2.0|here]].
-[[Datei:Dome_assembly-instruction.jpg|600px|thumb|center|Alternativer Text]]
+For the new PVC pipe dome go [[PVCdome|here]].
+== MIDDLE - LEFT - RIGHT (what a nice mantra)==
+[[Datei:Dome_assembly-instruction.jpg|600px|thumb|center|the overview]]
+[[Datei:cutndrill.jpg|200px|thumb|right|Cut and drill.. 500 holes]]
+[[Datei:struts2.jpg|200px|thumb|right|Spraypaint]]
+[[Datei:struts1.jpg|200px|thumb|right|Some finished struts]]
+[[Datei:struts3.jpg|200px|thumb|right|Painting done]]
+[[Datei:dome_build.jpg|200px|thumb|right|Construction]]
+[[Datei:dome_done.jpg|200px|thumb|right|Done!]]
+[[Datei:dome_kuschelig.jpg|200px|thumb|right|Cosy]]
+[[Datei:dome_down.jpg|200px|thumb|right|Deconstruction (~10 minute with 5 guys)]]
+[[Datei:d1.jpg|200px|thumb|right|CCCamp2015]]
+[[Datei:d2.jpg|200px|thumb|right|CCCamp2015]]
+[[Datei:d3.jpg|200px|thumb|right|CCCamp2015]]
+[[Datei:d4.jpg|200px|thumb|right|CCCamp2015]]
+[[Datei:d5.jpg|200px|thumb|right|CCCamp2015]]
+[[Datei:d6.jpg|200px|thumb|right|CCCamp2015]]
+[[Datei:d8.jpg|200px|thumb|right|CCCamp2015]]
+[[Datei:d9.jpg|200px|thumb|right|CCCamp2015]]
+[[Datei:d10.jpg|200px|thumb|right|CCCamp2015]]
+[[Datei:d11.jpg|200px|thumb|right|CCCamp2015]]
+== What?==
+A geodesic dome (V4 design) built from slatted frames (Lattenrostbretteln)
+It was built during Stadtflucht 8 in the Summer of 2015 right before the CCCamp.
+The total cost was below 200,- because only recycled slatted frames were used.
+Construction took about 10 hours with estimated 10 people involved.
+=== Preparation===
+Want to build your own?
 You need:
 * 250 bars (get 270+ to have some spareparts) the inner parts of slatted frames for beds work great
-* ?? M6 screws (length: ?? cm)
+* 91 M6 screws (length: 80 mm)
-* ?? Washers
+* 91 Wing nuts
-* ?? Wing nuts
+* 182 Washers (the bigger the better)
 * Spray paint (RED,GREEN,BLUE,ORANGE)
@@ Zeile 51: / Zeile 88: @@
 Drill a hole 2cm from the border in the middle of the struts ends.
-you need:
-start with 5 pcs type A struts (orange)
+===Assembly===
+{{#ev:youtube|DLlv82gz1Pc}}
+Start with 5 pcs type A struts (orange)
 Connect them like this:
 WASHER, SCREW, 5 BARS (A),WASHER,WING NUT, dont over tighten yet
+You successfully put together the middle structure that will be on the center top of the dome.
-now from the end of these connect  5 type B struts.
+Now from the end of these connect  5 type B struts.
 The magic formular is:
@@ Zeile 67: / Zeile 109: @@
-MIDDLE (A)
+* MIDDLE (A)  outermost layer
-LEFT (B)
+* LEFT (B)      middle layer
-RIGHT(B)
+* RIGHT(B)     innermost layer
 and thats how you go on according to the diagram above.
-this is true for the whole assembly.
+This is true for the whole assembly.
+Take a corner of a triangle, consider that "middle" and connect first left and then right to it.
-==Links==
+==Specs==
+calculated by putting bar lengths into [http://www.domerama.com/calculators/4v-geodesic-dome-calculator/ this calculator]:
+{| border=1 cellspacing=2
+|-
+!  Property !! Value
+|-
+| spherical radius || 2.370m
+|-
+| spherical diameter || 4.740m
+|-
+| height || 2.370m
+|-
+| floor area || 17.355m
+|-
+| perimeter || 14.890m
+|-
+| Surface area || 27.88 m^2
+|}
+==Notes==
+There are 5 types of triangles:
+{| border=1 cellspacing=2
+| Type
+| Count
+| MEASUREMENTS (center connector -> center connector)
+| MEASUREMENNTS FOR CUTOUT TRIANGLES
+|-
+| AAB
+| 35
+| 60x60x70
+| '''52x52x62'''
+|-
+| BBB
+| 35
+| 70x70x70
+| '''62x62x62'''
+|-
+| BDF
+| 65
+| 70 x 74.2 x 70.8
+| '''61 x 66 x  63'''
+|-
+| DDE
+| 25
+| 74.2 x 74.2 x 77
+| '''66 x 66 x 69'''
+|-
+| EEE
+| 5
+| 77 x 77 x 77
+| '''69 x 69 x 69'''
+|-
+|}
+===Links===
 [http://www.domerama.com/calculators/4v-geodesic-dome-calculator/ DOMERAMA online dome calculator]
+[http://www.acidome.ru/lab/calc/ extremely cool online dome calucluator]
+[http://stadtflucht.soup.io/ Many pix in soup]
+[http://www.dometheory.com/domes-as-coordinate-systems/ Theorie: Mapping Domes]
+[[PVCdome]]
+[[Kategorie:Howto]]
+[[Kategorie:Projekte]]